German Creates the PERFECT Workshop/Lab?!.....And So Can You!

Рет қаралды 186,030

Күн бұрын

JLCPCB 3D Printing & CNC Machining: 3d.jlcpcb.com/?from=AAA
Get PCB & PCB Assembly Coupons: jlcpcb.com/coupon-center
Try the world's most trusted PCB design software, Altium Designer with 365, for free and 25% off your purchase: www.altium.com/yt/greatscott!
Check out Altium 365: www.altium.com/altium-365
Check out OctoPart: octopart.com/
Previous video: • Don't Fast Charge your...
Garage video: • Germans do the PERFECT...
Essential Tools video: • Essential Tools that y...
Essential Components video: • Essential Electronics ...
Products shown mentioned in the video (partly affiliate links):
LED Spots: amzn.to/45pKzGI
LED Spots Dimmer: amzn.to/45jJFfe
LED Strip Dimmer: amzn.to/3QOTygx
Warm White LED strip: amzn.to/3KGYujB
Workbenches: www.hornbach.de/shop/Arbeitsp...
www.hornbach.de/shop/Konsta-L...
amzn.to/3VAwfGn
Big Shelves: www.regalraum.com/en/shelving...
Label Maker: amzn.to/3sdghIF
IKEA Shelves: www.ikea.com/de/de/p/alex-sch...
PEG Boards: www.ikea.com/de/de/p/skadis-l...
3D Models shown in the video:
www.printables.com/model/2303...
www.printables.com/model/3130...
www.thingiverse.com/thing:548...
www.printables.com/model/3002...
www.printables.com/model/3776...
www.printables.com/model/5264...
www.printables.com/model/3525...
www.printables.com/model/1652...
www.printables.com/model/1136...
www.printables.com/model/1111...
www.printables.com/model/5112...
Facebook: / greatscottlab
Twitter: / greatscottlab
Instagram: / great.scott.lab
TikTok: / greatscottlab
Discord: / discord
Support me for more videos: www.patreon.com/GreatScott?ty=h
Thanks to JLCPCB for sponsoring this video.
Visit jlcpcb.com to get professional PCBs for low prices.
In this video I will show you my new lab/workshop. Finally the house project was finished and it was time to move; but how to set up the new lab? Well, during the last 6 months I prepared it and now turned it into my ideal work space. I want to share with you how exactly I did it so that you might get inspired to improve your own lab/workshop ;-) Let's get started!
0:00 A New Lab/Workshop?
0:59 Intro
1:48 Lighting
3:43 Workbenches
5:13 Storage (3D Printed Wall Cabinets)
8:18 Storage (Big Shelves)
9:34 More Storage Solutions
10:50 Additional Tips
11:23 Verdict

Пікірлер: 580

@horiciOwO 9 ай бұрын

Legends says if you say Wago three times in a mirror a german man shows up at 3am and rewires your entire house

@td3drummer267 9 ай бұрын

Lol

@greatscottlab 9 ай бұрын

Haha. Sounds plausible though.

@mjc0961 9 ай бұрын

Hahaha I'll have to try this

@Spooglecraft 9 ай бұрын

if you do that in germany, there's a certain chance that you become that german man

@309electronics5 9 ай бұрын

You will summon the Wago man who will rewire your home

@timthomas9105 3 ай бұрын

I'm retired after 30 years in electronics. Started out in the US Navy as an Engineer then went into Comm & Satcom systems. then another 22 years in Consumer TV VCR Cameras CB etc then my last job was in access control, gate systems and DVR-Camera systems. When I bought my house 10 years ago all we had was a satellite dish and a single phone line in the Master BR. Now it has a full distribution system in every roon, Cable TV and local antenna, Gigabit cable modem, Cisco 24 port switch, and 20 cameras. Now..... It's time to get a shop setup again. Since I'm near the ocean again, I'm looking into getting a shop setup for fixing Marine radios, NAV and radar equipment. It may be a hobby for me but I can still recoup some of the costs of my equipment by fixing the NEIGHBOR's stuff.

@MCsCreations 9 ай бұрын

Fantastic work, dude! Your lab and workshop both look amazing! 😃 Mine is divided as well, but it's a freaking mess right now... I hope I can organize it soon. 😬 Anyway, stay safe there with your family! 🖖😊

@greatscottlab 9 ай бұрын

Thanks and thanks for the feedback :-)

@TD-er 9 ай бұрын

I'm currently in the process of re-organizing my "lab" myself. I just bought those new drawers for the IKEA Ivar shelves along with the relatively new IKEA Alex cabinets with a door and 1 shelve. Those are the same outside dimensions as the Alex drawer cabinets I already had. So there is now one such drawer cabinet with two of those Alex cabinets with a door stacked on top of eachother (all screwed to the wall). From the IKEA Ekby Alex drawers, I made a stand for on my desk, under my (wall mounted) monitors so I have 2 drawers above my keyboard and fit 2 power supplies under them. On the side of these drawers I mounted two 7 port Anker powered USB3 hubs to have enough USB ports available on my desk for all kinds of projects, test equipment, etc. Each have 3 extra USB ports for charging. The monitors are all wall-mounted. Four 27 inch 4k monitors in total. Three in a row and one above the center one. I do have a Philips Hue Aurelle 120x30cm ceiling light above my electronics desk. The regular price of it is a bit too much, but every now and then it can be bought at a discount. It is really good light to work with. I will have a look at those printable storage sollutions, but not sure where to wall mount it as nearly all my (vertical) walls are now occupied with Ivar shelves and Alex drawers.

@Eduardo_Espinoza 9 ай бұрын

This will help me find things faster thanks!:D

@MCsCreations 9 ай бұрын

@@Eduardo_Espinoza I'm going to buy some magnetic strips tomorrow... To organize things like drivers and pliers and stuff like that. 😬 Perhaps you could use the idea as well.

@ganopterygon 9 ай бұрын

7:10 I use a system of coordinates on my storage A1, A2, A3… B1, B2, B3…, and I keep a spreadsheet with all the information of every component including the quantity available, the package, and some characteristics like voltage, current, input offset, tolerance, etc. depending on the type of component. This way any new project and I can quickly check what I have available and that needs to be purchased and I no longer have to try to remember what I have or look into a ton of ESD bags stored in different containers it makes a world of difference. It might sound a little bit excessive but after 25 years doing electronics it is worth it. :)

@stepheneyles2198 9 ай бұрын

Can you please develop that as a website so that we can take advantage of your system for our own parts? I think it would be hyper-useful as I've always got lots of thing stashed away 'somewhere' but can never find them when needed!

@Jacksparrow4986 9 ай бұрын

I'm working as a software engineer and I'm often struggling to get any use out of documentation, as it's often outdated or insufficiently detailed. If it works for you that's great but I guess I'm in the camp of "nothing beats holding the parts I need in my hands to check they are there" (at work I look at source code to see what actually happens. Not what's supposed to happen as specified in some document, but what's actually happening).

@ganopterygon 9 ай бұрын

As long as you can hold them in your hands that's OK the problem starts when you have hundreds of part numbers, that's why a simple spreadsheet is the solution for me :D

@tuesss 9 ай бұрын

And the same is true for code: as long as you can quickly read and understand it, that's great, but once the system gets sufficiently complex you need some documentation. Even outdated one is often better than nothing, as it can serve as a starting point for people new to the project. Functional programming makes it much easier to see what the code does without having to analyse each line, but it still doesn't solve the problem in case of very complex systems. A few years ago I also started numbering my boxes and keeping track of the contents using a spreadsheet. It has already saved me many, many hours of my life, even though it's not perfect and sometimes I forget to put something back in its box or update the spreadsheet.

@OgbondSandvol 9 ай бұрын

@@stepheneyles2198Are you serious? ganopterygon said that he/she has just a spreadsheet for his/her own use... can you imagine the several degrees of complexity that are in the development of the parts control system in a website?!

@steveroberts1861 9 ай бұрын

All I can say is Wunderbar.

@water_alias 9 ай бұрын

Jes

@MCsCreations 9 ай бұрын

Hey, be respectful!

@JeffGeerling 9 ай бұрын

06:56 wow, that is dedication to 3D printed storage! With how nice your storage wall looks... I might have to go that route instead of the little plastic boxes next time.

@mnbvcx 9 ай бұрын

Yep I really wondered why he didn't order it from JLCPCB, that would have been the perfect sponsor integration 😅 But I guess the sponsorship probably came later.

@johnsonlam 9 ай бұрын

Hi Jeff, wait for your video now.

@lavacat720 9 ай бұрын

Video uploaded 3 minutes ago, but this comment is from 2 days ago, how

@googlekonto3138 9 ай бұрын

@@lavacat720 The Inner Circle

@diy_for_all 9 ай бұрын

@@lavacat720yeah how

@joveaaron-real 9 ай бұрын

I'm building one too! I have a reasonable electronics knowledge but I think it's good enough for my age (15 years old). I'm struggling with expensive tools like oscilloscopes. My parents won't help me buy stuff for myself, but I'm slowly saving up money to get an oscilloscope and other things. A local hardware store sold me some component drawers and I'm almost done building up my budget lab. I very much enjoyed the video!

@greatscottlab 9 ай бұрын

Sounds awesome. Wish you luck and success in the future :-)

@joveaaron-real 9 ай бұрын

@@greatscottlab Thanks for the encouraging words! :)

@NFMorley 9 ай бұрын

3D printing the naming labels too is a fantastic idea, and I'm def stealing that for my next upgrade - I'm a bit particular when it comes to labelling things around my space, and always get annoyed by stickers falling off or just looking a bit rubbish.

@ericlotze7724 9 ай бұрын

Yeah the ability to basically do “dual shot injection molding” / the even rarer multishot injection molding for *everything* with FDM 3D Printing is WILD. I don’t have a MMU or ERCF yet (or better yet something with a toolchanger), but labels like this / buttons for stuff are going to be an AMAZING capability. Part would break before the “label” would be messed up.

@abrarahmed1269 9 ай бұрын

I love this workshop! Currently studying electronic engineering a lot because of your videos, but hope to make my own workshop like this. Currently working out of my shed 😂 I can see this will further improve your content, and can’t wait to see it. Love from the UK

@Artogon43 9 ай бұрын

This is simply a work of Art. Im dreaming of a setup like this. Once i have my own house (somewhere in the future) i want to do stuff like this. You are living my dream and i cant be happier for a stranger.

@forcovers438 9 ай бұрын

It had been 4 years watching & learning by your videos, from only speech type to exposing your face on video... your content never fails to impress & feed us with newest version of knowledge possible with logical testing approach❤... love from india

@theodoros_1234 9 ай бұрын

Your new workshop looks so clean and organized! Great job!

@seanjackson6058 9 ай бұрын

A decade. Wow. I've been a fan from the beginning. Nice lab upgrade. I'm looking forward to seeing what you continue producing. Thank you for your work!

@jaysonbecosacer3044 9 ай бұрын

Your new lab is amazing! Watching this video is really therapeutic for me, especially when it comes to organizing every tool and equipment that are readily available on the workbench. I hope I can also customize my own electronics lab in the future. I'll definitely watch this video as a guide!

@greatscottlab 9 ай бұрын

Awesome :-) Thanks for the feedback :-)

@ToniPlays_ 9 ай бұрын

If I had a workshop like that, I wouldn't leave that room in weeks. Pretty much what I'd make if I had the space to Great job from the Great Scott

@greatscottlab 9 ай бұрын

Thanks 👍

@3nertia 9 ай бұрын

Same!

@PhG1961 9 ай бұрын

Waw, did I enjoy this video! It also inspires me, since I'm in the dry wall/plastering/sanding fase of an extension. Great Scott has great ingenuity and crafstmanship!

@matthewsmith5883 9 ай бұрын

Looks very neat and tidy! I love your attention to detail

@kuro68000 9 ай бұрын

German houses are so well made and spacious. This kind of thing would be an absolute nightmare in the UK. Congrats.

@andrewlalis 9 ай бұрын

Depends on where you live in Germany

@nikolatotev 9 ай бұрын

Absolutely Amazing! I'm currently planning my workshop and I'll definitely be using this video for some inspiration!

@MrCarlsonsLab 9 ай бұрын

Fantastic Job Mr. Great Scott! Thanks for sharing your adventure.

@Drjtherrien 9 ай бұрын

Nice! I'm about to start a revision of my workshop and I have picked up a few good ideas here. Thanks!

@DoctorX17 9 ай бұрын

Looks great! I love that those custom shelves match the IKEA aesthetic. And +1 for printed storage, I have my own printed shelves and drawers and it's so great!

@eduardofelippone4582 9 ай бұрын

I love your new lab. Unfortunately, in my country we don't have any Ikea products, but seeing your designs help a lot by suggesting new ideas. Great Job, and please, don't stop creating videos on your channel!!!!

@Mad4400 9 ай бұрын

No Ikea? I thought they had pretty much conquered the globe.

@eduardofelippone4582 9 ай бұрын

Not yet, but soon... :) I line in Uruguay, South America, and IKEA landed in 2022 in Brazil and it will probably open stores in Argentina as some information was filtered in early 2023, so they are getting near... we were already targeted by other brands like McDonald's and Starbucks, so why not IKEA? At least we will have useful stuff to consume (I know the brand from when I was traveling across Europe, including Germany)

@guillermocisneros863 9 ай бұрын

Well, in Mexiko Ikea cost double, just go to the website and took pictures from there, visit your local carpenter and go for it! Better quality and help your economy

@bunny1033 9 ай бұрын

The smile in your face honestly makes my day

@Ironmarcoz 9 ай бұрын

Amazing lab Scott!!, greetings from Dominican Republic

@benwayne5208 2 ай бұрын

Amazing! Very inspiring in many ways! Thanks for sharing!

@rodneysmith1750 9 ай бұрын

I am quite envious! Love the organization and labeling in the lab, your garage workshop is very nice and something I truly do miss, since I no longer have a garage or real working area, Great video, keep up the good work!

@jonesgang 9 ай бұрын

The new workshops look great and it now gives you a lot more room. Looking forward to many more great videos.

@greatscottlab 9 ай бұрын

Thanks :-) More to come ;-)

@selbie 9 ай бұрын

This is a great setup and I particularly love the corner shelving idea to make use of normally awkward space.

@VitorMadeira 9 ай бұрын

I love this kind of videos! This saves us TONS of time! I mean, for us to learn this from ourselves only, it would take MONTHS (or even couple years) so I definetly want to thank you so very much for this *precious video*. Thank you and greetings from Portugal.

@raymondreyes4244 9 ай бұрын

So happy for you! You're videos are a great contribution to humanity.

@thiccvicx 5 ай бұрын

Great Job! I love the efficient use of space while keeping a really nice aesthetic. I do all kinds of DIY in my 11m^2 bedroom and you definetly gave me some great ideas.

@mrfoodarama 9 ай бұрын

Awesome work! Looks like an incredible setup

@stargasm1000 9 ай бұрын

Very nicely done!! You've employed some great ideas.

@devcybiko 9 ай бұрын

Great Work, Scott! You've given me a lot of good ideas.

@edwardvanhazendonk 9 ай бұрын

Nice setup Scott, great work!

@eadiew 6 ай бұрын

What an excellent lab! This is my dream workspace. Perfectly organized and with a wonderful aesthetic.

@dorianim 9 ай бұрын

This looks absolutely amazing! 😍

@TomTom-ty5ej 9 ай бұрын

I love it! I wish I could make a similar lab for myself one day. Fantastic thing is when you can live from your hobby.

@309electronics5 9 ай бұрын

Fantastic video, thanks for sharing your recommendations and tips for things! I already have a pretty good work bench but lacked good storage and lighting even though i dont film and i am still a teen doing electronics the tips helped

@jlucasound 9 ай бұрын

Great Scott!! What Has He Gone and Done Now?!! 🤣😂😍🥰 JLCPCB, Ikea.....now all I need is ambition!! 🤣 Excellent video, Scott, as has come to be expected! 😁

@Tomas_Prucha 9 ай бұрын

One of the best workshops I have ever seen! 💪

@Shellyfi 9 ай бұрын

I have been searching good storage/drawer system and now you offered it Thank you

@twinsen04 9 ай бұрын

Those wall mounted sockets at the end really caught my eye. Would like to see more about them.

@Poult100 9 ай бұрын

Just lovely! And I have to say I am jealous over your space; I live in a narrowboat so my workshop is super-small! It's like working in a corridor!

@sicotronicypunto7460 9 ай бұрын

New look makes it look 1000 times more easy to work on, gotta send this video to my boss so he let's me change our lab setup

@ritolina84 9 ай бұрын

Superb performance by Great Scott

@eguneycetin 9 ай бұрын

Looks incredible! Great job from Great Scott!

@greatscottlab 9 ай бұрын

Thank you! Cheers!

@joeywhite-swift7495 9 ай бұрын

You bring Respekt, wer's selber macht to a whole new level! 😉

@Roskellan 9 ай бұрын

My working space is 5.5m x 8.5m. The space is workshop (carpentry, metalwork), and electrical (radio and test), it's also man-cave (hobbies, leisure, video, 3D printing, refreshments and fridge), maintenance (home, garden, electrics, plumbing, decorating). Worktops and storage very important, also comfort and social area. Look and feel of the place has to be right as does the lighting, day and night. A real labour of love, and I do, I love the space. Even have a log burner as a focal point and keeps me warm in the winter.

@Danielddiniz 9 ай бұрын

It’s great 👍🏼 congrats 🎉for the new lab! 🚀

@Zamsky39 9 ай бұрын

Sick setup! I'm definitely going to draw some inspiration

@castlecodersltd 9 ай бұрын

Nice, thanks. I really like the 3D printed labels. ☺

@ThisRandomGuyYouDidntNotice 9 ай бұрын

some really nice ideas for improving my own workshop. one thing i have to add though: i'd rather choose some high CRI lighting than temp changing one ^^

@DLSDKING 9 ай бұрын

Few suggestions... 1)Add a fall guard to the table with open back access, you dont want your equipment or stuff falling backside of table. 2)For bulk 3d prints, i would not use 0.4mm nozzle, rather a 0.8mm or 0.6mm. You can save nearly more than half of time in printing. 3) An air purifier is optional but improve maintenance of lab. 4) For SMT resistors and capacitors, if you are only gonna use manual assembly, i would recommend tiny transparent pill bottles like homepathy pill bottles. The paper on the reel disintegrates and takes more space.

@noslidemais 9 ай бұрын

It turned out great, congratulations. I have to organize mine too.

@forrestbehr8778 9 ай бұрын

Perfect timing...I'm in the throws of building a new work desk right now. And aside from the height (mine will be ~80cm), I've been considering all the things you covered here. Storage seems absolutely key, so I'm building built-in shelving to fit dollar-store plastic boxes (because I don't have a 3D printer, lol.) And I'm doing a curtain thing to hide the storage when I'm not using it because my apt is only 250sqft, and the desk alone will be a good 16sqft (23.2 and 1.5 square meters, respectively). Great vid...thanks!

@EdwardM919 9 ай бұрын

Well worth it, good for you! I hope to see many more videos in years to come.

@HannesMrg 9 ай бұрын

Looks awesome, so much space!

@cartoon-network814 9 ай бұрын

absolutely amazing - shifting - waiting for the videos every day!!

@FesZElectronics 9 ай бұрын

Great new Lab! I especially liked the 3d storage!

@millomaker 9 ай бұрын

Everyone is in a period of organisation right now I have the impression 😅 Great workshop 👌

@greatscottlab 9 ай бұрын

Thanks! 😃

@MH-ie1sg 9 ай бұрын

Very nice! Looks great.

@tasos_at 9 ай бұрын

Very good job!! Well done!! 👍

@Jacksparrow4986 9 ай бұрын

That advise about seperating electrical work from wood/metal is one I should heed. I occasionally solder on my general workbench where there might be some grease left from a previous bicycle project... I don't plan on replacing my small parts storage stuff even though I got a 3d printer - visibility of contents beats tidyness...

@AlviniZilverstand 9 ай бұрын

your new workshop and lab look fantastic dude! if i had those i would probably get the energy to make stuff, from just how good they are.

@melplishka5978 9 ай бұрын

Definitely a dream shop. Well done Scott.

@JohnJones-oy3md 9 ай бұрын

4:26 - They look great. I made my own workbenches as well, and topped them with light colored smooth laminate wood flooring planks. With the blond wood and satin black painted wood frame, in passing it looks like something from a 1990's Ikea catalog. I thought I would have to swap out the laminate often due to wear, but it's held up incredibly well. Makes sense, as it's mean to be walked on. Cleans off with spray cleaner and a paper towel. I wish I would have thought of this years ago.

@BerkleyJones 9 ай бұрын

Looks Great mate 👍👍

@jakobjorgensen7773 9 ай бұрын

Awesome setup!

@user-eh5zk5bb9k 7 ай бұрын

wow! amazing! it is so interesting how you developed through all these years! keep going!❤

@jonahliew150 9 ай бұрын

I love your lab layout.. awesome!!!

@pierreboone568 9 ай бұрын

looks great, well done.

@jspencerg 9 ай бұрын

Materials question: Does printed plastic have the same strength as molded plastic? I know stress applied over time can cause creep and failure if the material does not have the required elastic strength. I expect material specifications for allowable loads are very dependent on the machine settings and part geometry(different cooling rates lead to different bonding). Your extensive printing will give you lots of perspective on this issue! Thanks for sharing.

@vargassigi 9 ай бұрын

Grate as grate Scott is!👍🏼👍🏼

@Pelican_t 9 ай бұрын

This reminded me about the fact I also need to organise my room since it's basically a workshop lol I always have random containers placed on the edge of the shelves and wires hanging everywhere

@theteenageengineer 9 ай бұрын

Definitely want to see a full tour of the completed garage!

@rafaelangeltorresgomez4507 9 ай бұрын

Looks great! weel done man.

@akhurash 9 ай бұрын

That looks really nice! Good job.

@greatscottlab 9 ай бұрын

Thanks :-)

@MinePossu 9 ай бұрын

Tip: the fillaments dont like humidity and general dust so should be stored in a dry closed enviroement. But if you use them up quickly enough that method for storing is fine enough.

@tarakivu8861 9 ай бұрын

There are some filaments like PVB which really like water and i prever to print those while they are in my dry-storage through a hole. Can make a huge difference

@MikesTropicalTech 9 ай бұрын

I just finished building a new workshop in my new apartment in Barcelona. Every time I move I incorporate new ideas, just like yours, congrats! One thing though - your 3D filament is going to soak up the moisture in the air. I keep my spools in big ziploc bags with dessicant packs inside and haven't had any problems.

@dustincole7067 9 ай бұрын

Looks fantastic!

@mqe73M 9 ай бұрын

You deserver more views and I hope the algorithm will bless you once more. Very nice set up super clean.

@paulperano9236 9 ай бұрын

Not having the luxury of a spare room for my electronic work space I have to use an Ikea Computer Desk with Ikea large Twin Cupboards. So space is critical for me. One of the best things I found was SHORT POWER CABLES. If I need to use my oscilloscope and signal generator I power them with power cables that about 30-40cm long. The std cables would waste more desk space than the test gear. Aaahhh ... Ikea - Swedish for "It'll do."

@breezetixhv 9 ай бұрын

10:45 watch out for humidity at the top of the room, filament absorbing moisture more.

@davidwood1313 9 ай бұрын

Great workshop, I am jealous. Onne thing, maybe put cleats at the bottom of the hanging storage cabinets. If they get heavy that will help support the weight.

@quyet1176 9 ай бұрын

time really flies. I remember watching your old lab videos years ago.

@a2_zhongbaode718 9 ай бұрын

Wow this gave me alot of ideas for my future room! I love the layout, color matching etc.. everything looks modernized and organized its a dream workshop. The custom selfs are genius, too bad its probably the only thing unavailable to a broke student but amazing job! And cool video!

@AeroLens_by_SP 9 ай бұрын

Great video! one tip-you should consider storing the 3d-filament inside vacuum bags that way they will not absorb the moisture and will not become brittel

@Colesy2000 9 ай бұрын

I store mine in "Really Useful" air-tight cake boxes with silica gel sachets. Works a treat. They're exactly the right size and are stackable :-)

@beakytwitch7905 Ай бұрын

Having a lab is fun !😊❤

@mtalhakhalid1679 9 ай бұрын

Thanks for guidance Scott❤❤ i always had problem with sotrage storing snall vig conoonents

@electroimpyo 9 ай бұрын

Looks great and hope you are happy it

@todormiroleskov8663 9 ай бұрын

This is... This is like a dream come true. Really happy for you man. I hope someday I will have at least the electronic workroom and I plan to make it as a man cave as well. :)

@greatscottlab 9 ай бұрын

Good luck :-)

@XM913CG 9 ай бұрын

My small home based repair shop grew so fast that I could not keep up with the finishing touches that should be a must. like insulation and wall paneling. I was not prepared for that type of demand. Parts storage is always a huge issue. Your workshop is a dream, and mine is a disaster(very cluttered). But the scale of projects that you do verses mine are quite different. Always enjoy your creativity with everything you show us on your videos. Keep up the great work.

@josuedavidsosapastrana1383 9 ай бұрын

I love your way of doing things ; beauty.

@andresago82 9 ай бұрын

Congratulations, what a pleasure to work there, greetings from Colombia.

@capriracer351 9 ай бұрын

A lot of great improvements. I'll be studying some of them to help improve my workspace. I have that same Dymo label printer. It does a good job for the price. I find that the adhesive for adhering the labels is not as good as it should be though, so I usually cover with a clear tape.

@ANANTHASANKAR_UA 9 ай бұрын

Very professional and efficient way of assorting components👍I love it😍😍I have one small idea, take a list and then link to a spreadsheet file on cloud. After that with the help of an API wirelessly display the stock status to an GLCD connected to node mcu when a tray is open or switch is pressed on the top of the tray 😊( Display like ...No of components left , New one, Used one , damaged ,total count etc...) Try it 💪 surely you can ⚡

@NaysayersWillNaysay 9 ай бұрын

Looks amazing! I agree on keeping mechanical and electrical work separate. I do my automotive and mechanical in the garage because of dust and grease mess. I keep the electronic projects inside.

@dcallan812 9 ай бұрын

Having built more than one, and disassembled them. Getting the space to work or you can really take some thinking about and reshuffling. Great video for helping with the layout of a decent workshop-lab. Lighting is a key area avoid flicker and have some that you can bring really close to the work area. 2x👍

@greatscottlab 9 ай бұрын

Thanks and yes, true :-)