GY6 171cc / 172cc BIG BORE BUILDER ENGINE KIT [A++ PERFORMANCE]

No video

GY6 171cc / 172cc BIG BORE BUILDER ENGINE KIT [A++ PERFORMANCE]

Рет қаралды 74,908

Күн бұрын

COMPLETE BUILDER ENGINE KIT:
www.rollingwre...
BECOME A MEMBER:
/ @rollingwrench
ENGINE WORK STAND:
www.rollingwre...
COMPLETE ENGINE TOP END:
www.rollingwre...
If you are looking for the absolute easiest way to get great performance out of a GY6 engine, there is no better way than with a big bore kit! This Is the Rolling Wrench Builder engine kit. It will come with everything you need to build the engine for your scooter, buggy, motorcycle or Ruckus. This is a qmj157 long case bottom end engine with a full 61mm 171cc big bore top end. It will come with every bolt, dowl, gasket, and miscellaneous part to make this a running performance Gy6 engine. Its a all in one builder engine kit. This video will show you step by step how to install a big bore kit in your GY6. Use this video to do the install on our builder engine kit. The GY6 performance big bore engine kit will pump the performance in a major way! The 171cc forged 61mm drop in big bore kit, paired with our ProBld performance cam shaft, big valve big port head, and 28mm PWK slide carburetor with jets will blow your mind! easy drop in power that wont break the bank.

Пікірлер: 183

@HReality Жыл бұрын

Old guy here.. just noticed stretched ruckus in my feeds and started looking around. Presently Im like 2or3 miles from work and figure it would be great to use and leave the car parked. But, man this is one deep rabbit hole. A fun rabbit hole.. but deep

@RollingWrench Жыл бұрын

Lol true story! Big rabbit hole

@idkwhatnametochoose. 6 ай бұрын

Thank you, for putting these videos about assembelling the motors i realy learn a lot and just sucsesfully changed the cylinder head from my gy6 150cc .

@rolycata77 Жыл бұрын

This video was awesome and very very helpful. I’m new to this hobby and I definitely enjoyed watching/learning how to put this engine together. 👍🏻👍🏻

@RollingWrench Жыл бұрын

Glad it was helpful!

@Libertas_Primus 2 жыл бұрын

Hey man, great Ruckus idea for you. Build a hybrid ruckus. A hub motor up front with regen capabilities. Change the twist throttle to two thumb throttles that can be pressed simultaneously or individually. One thumb throttle for the engine and one for the. Motor. Another thumb throttle on the left grip to activate regen. battery pack and bms under the seat. The hub motor will really give you the torque and power to merge and move around in traffic when it’s is needed. Can add to top speed when needed, and will increase the fuel mileage also. I’ve been wanting to realize these ideas for awhile but you have the resources to make it happen. It’s the best of both worlds. Would definitely be helpful on a GY6, but would really shine on the stock ruckus crowd.

@dryzl3910 Жыл бұрын

i like this idea man

@zentient1117 9 ай бұрын

This would be sick

@jimmyalgiere1291 Жыл бұрын

Hi its Jimmy just watch your new build and could not have had a better exsplaned in detail nice and slow pace easy to understand what you are doing . This session of your build would be nice to send to all small engine repair college to show and tell class.

@cn9936 2 жыл бұрын

Now I’m having a Mikuni round slide carb, better clutch installed, and I’m porting the head! Hopefully it rippss

@A_Stereotypical_Heretic 2 жыл бұрын

Why port the head?

@cn9936 2 жыл бұрын

@@A_Stereotypical_Heretic to get more air in it and more fuel so you get more combustion and hp.

@cn9936 2 жыл бұрын

@@A_Stereotypical_Heretic it ran really good and I hit 44 mph but yesterday I must’ve melted the piston. It was smoking and leaking oil through the exhaust.

@A_Stereotypical_Heretic 2 жыл бұрын

@@cn9936 probably because you ported the head

@Timboslicce Жыл бұрын

Probably because these engines are garbage.

@eduardogonzales2150 Жыл бұрын

This just a needd ,for my scooter gy6 150cc is upgrade rigth now is a modificacion 171cc ,and you help me for the instruccion is a perfect, thanks bro !!😎😎😎 saludos desde Mexico ✌🤟

@RollingWrench Жыл бұрын

Great to hear!

@Bungie117MC 9 күн бұрын

What kind of scooter do you ride?

@irocss85 2 жыл бұрын

Watched this again after purchasing a1p57qm project bike (boom brand, like a rugged) and I can't wait to get into the build. This video is awesome in an auto tech built lots of performance car engine no bike motors though but I can see it's the same just way smaller scale. More i just gotta test mine apart. Doggie or what HAS to be done and then plan the build. I can't afford this compete set up but I'll probably do some of your upgrades. And buy my needed stock replacement stuff from you if I can.

@JoeyDoolittle-r9q 23 күн бұрын

Can you show a video of the 172 cc big bore kit on a extra long case for a 150 cc scooter with 16 inch wheels

@zentient1117 9 ай бұрын

You remind me of Rich Vos for some reason haha thanks for the video though. Im about to go all in on these little motors.

@handendaer Жыл бұрын

Ignorance is bliss. Public school is 💯👩‍👩‍👦🌈🧑‍🏫👩‍❤️‍👩🧑‍🤝‍🧑😷😷

@urbak339 2 жыл бұрын

Getting the monster big bore kit back in stock for the qmb139 any time soon?

@user-zh7zu7ii2z 3 ай бұрын

Thanks again how will I get the parts order from you

@noahbryant7397 2 жыл бұрын

Do you make a kit for the icebear maddog 50 to 150, I can’t really find anything on it and want to swap it with this 171 kit

@maggie4475 Ай бұрын

I’m trying to do the same thing

@vincentnavea6999 Жыл бұрын

nice video. watching from the Philippines

@RollingWrench Жыл бұрын

Thanks for the support

@thefightingchance 10 ай бұрын

I thought the rocker assembly was bolt size M8 which is 7-11ftlb. And the rating is by bolt not nut size.

@noeldiaz5316 2 жыл бұрын

Hello from new Britain Connecticut, I have a NCY 171cc kit with 61mm,11grams roller and racing clutch,30mm carburetor but I don’t run more than 55mph, I want to gear up what is the best gear you recommend for my upgrade.

@briantalarico8880 2 жыл бұрын

Bro we should ride, I live in Bristol. He has a gear up kit on his website I ordered it. You choose what type engine you have and if you want it pressed or not. I got mine pressed a little pricey but worth it. I haven't installed it yet.

@daf2666 2 жыл бұрын

Bro. Idk if u already have this kind of video. If there is , please link, but if not, please make a video of it. Regarding about the combination of flyball/slider ball .. It is confusing to tune up that thing as this is my 1st time getting a scooter/automatic.

@DukeGibo Жыл бұрын

FREAKIN Bad ass!! She does rip!!

@imaddrief2695 Жыл бұрын

Please, brother, make a video for us about the piston and about each of the rings, including the oil ring, and thank you very much

@RollingWrench Жыл бұрын

Done! :-) PISTON RINGS kzfaq.info/get/bejne/b9KPqqaBvKnNdX0.html

@Jalum64 5 ай бұрын

I installed your 171cc Pro Bld kit and followed your video step by step, but after tightening the rockers down the engine will bind a little bit then turn smoothly until it comes back around and binds up again in the same spot. What's the possible issue(s) it could be?

@nigelmcclure6440 Жыл бұрын

Great video brother I really enjoyed it buddy

@TheNewHights 2 жыл бұрын

Are you lining it up with the T or the line next to the T, in the video you mark it with the sharpie but the close up picture doesn’t show it marked

@alansingh6011 6 ай бұрын

Can I put 65mm piston and 8.2 striker on a block engine 150

@fredfeldmeier8228 9 ай бұрын

Very nice video Thanx.. Let me ask you a question.. What kind of engine the honda navi have..?? Thank you 🛵

@georgeforeman89 Жыл бұрын

Is the qmj157 just the stock 150cc gy6?

@megadawg342 2 жыл бұрын

Very quick. Strange high pitched squeel coming from variator at idle.

@anthonytoler3916 4 ай бұрын

Would I be able to get a GY6 171 short case engine for my bintelli flash scooter?

@keithkunik3229 Жыл бұрын

Bro I’m ordering from you every time!! Very informative!!! Ordering the big bore next time I put on road !! The 200 plus kit fit on a Ruckus??

@sweetlovetiger Жыл бұрын

I have a 150cc gy6 I would like a kit that I don't need to bore the case you have a kit that gives me more out of the engine with out braking the bank

@DXDAFENIX 2 жыл бұрын

Awesome video!

@maggie4475 Ай бұрын

I have the Maddog Rukus, could I use this on the Rukus? If so how much is this kit???

@mrworldwide6770 Жыл бұрын

Could I do this to my 2006 tank 150cc

@flintstone4208 Ай бұрын

That's crazy the build kit cost more than the scooter if you got a Chinese scooter as people call them That's about like the people that putting stuff on a gun that cost more than the gun but hey if you got the money and that's what you want to do go for nice looking kit how much more speed do you get for a over $1,200 and something $ kit

@kevinlewis9151 Ай бұрын

Always better to go forged, the cast can crack easier

@muhammadfadhil4821 2 жыл бұрын

hello, im from malaysia. My question is do you ship to malaysia?.. interested on the 232cc engine

@jdamage5002 2 ай бұрын

I need a battery box for a Maddog, where can I get one?

@roywalls5595 2 жыл бұрын

I forgot tell you its till back fire because old exhaust muffler got built in catalytic converter! Do I need get same thing 🤔 or not? Matthew

@kaddymorgan1625 Ай бұрын

Ey listen me. I have a 150cc GY6. Do you have a kit to make an upgrade to 180cc?

@deniseplace6215 Жыл бұрын

How much for top end oil pump is the 180 a puch in and

@mizzlethyself 2 жыл бұрын

Transmission serial number is YN173MM. Website says it’s supposed to go 70-75 mph I can’t get over 50mph. Please help

@Postalguy1 4 ай бұрын

Will this go in a sym jet 4 2015?

@jasonjulian1 2 жыл бұрын

So what's the actual total power output of the 171 with this cam and big valve head?

@RollingWrench 2 жыл бұрын

I haven’t dynoed it. But I think the ultimate question is how fast 0-30 / 0-60 and top speed. I have a fancy device that measures that. I’ll have a video out soon

@jasonjulian1 2 жыл бұрын

@@RollingWrench I used to have a Gtech meter way back in the late 90s that used accelerometers to measure g forces and 1/4 mile times, 0-30/60. They probably make something much nicer now. Lol. Very nice engine kit you've put together. This will hopefully make a lot of people happy.

@wilconradnorinradd Жыл бұрын

$1200.00 Sure I'll pay for that! For $0.50 more, may you put all the hardware(screws)into individual bags and label them by component?😆 When I'm ready to build a Turbo Ruckus, PROBLD will be my way to go. You do excellent vids and I've seen other YT creators into the scooter scene use PROBLD parts in real world. Living 5000+ miles West of Cali, it never snows, so it's scoot-scoot year round! It never snows in Winter/Spring it rains. So it's scoot-scoot approximately 10.80 months/yr!

@RollingWrench Жыл бұрын

Niiiice!! I appreciate your support 🙏🏻💯

@Mikeb8134 Жыл бұрын

thanks

@Mikeb8134 Жыл бұрын

Fits great, glad I bought this kit!

@jeancey1 2 ай бұрын

Why can’t you just fabricate the engines and sell them pre-fabricated and everything installed options so it can just be pluck and play

@JamesPropmaker Жыл бұрын

I have a question. I have an Ajs Modena with an short cast GY6 125cc engine. With factory EFI. I want to put an 150cc barrell and piston on but I think it will run to lean. Should I buy 150cc ECU.

@cemtkeenan2750 2 жыл бұрын

I love you guys! Best info, best parts! Do you have (or recommend a source) a bolt and stud kit for gy6? I am installing a 47mm cylinder and head combo with 69mm valves in my pony 50, I'd prefer to upgrade the hardware too from the chineese bolts and studs.P.S. I'm not afraid to tap for larger diameter studs!

@jonnyb9982 Жыл бұрын

Will give you an extra timing chain, but you only get 2 g clips.

@RollingWrench Жыл бұрын

Do you need more in the kit?

@jonnyb9982 Жыл бұрын

@Rolling Wrench I haven't ordered yet, but will be as soon as I get a gy6. I was just being silly because you know how far those clips fly. Great video. Great customer service.

@eyeswideopen4888 Жыл бұрын

I've just bought your 171cc cast with cam. I have a ncy cvt kit. What gram roller weights should I run so I can easily wheel I also have a nibbi pe28mm

@roberttyndall6259 2 жыл бұрын

Sweet

@simsekny Жыл бұрын

Can i upgrade factory fifty 50cc gy6 engine to 172cc by using the same kit? Brand/Model is Kuba/bluebird

@RollingWrench Жыл бұрын

No, they are two totally different engines. The 50cc mounts from the bottom and the 150 mounts from the top

@JAG77productions Жыл бұрын

Can we get flow bench testing pre before pro.

@nirunboonkum1720 Жыл бұрын

I just upgraded big bore kit and cam Engine revs nice and good power But feels like in need more gear Ore higher roller weight in cvt? What you suggest?

@RollingWrench Жыл бұрын

You can do a gear up kit: www.rollingwrenchdenver.com/products/gy6-gear-up-kit?ToPasteboard

@nirunboonkum1720 Жыл бұрын

@@RollingWrench ore go higher gram on roller?

@TheBeardness 7 ай бұрын

I got a project go Kart that has low compression, would just going a big bore kit be a better option than just 'stock rebuild'?

@RollingWrench 7 ай бұрын

Great idea

@TheBeardness 7 ай бұрын

@@RollingWrench I can't believe I got a reply. After watching your videos for weeks, I'll be grabbing your kit to solve this issue. Great stuff and excited to keep building!

@RollingWrench 7 ай бұрын

@@TheBeardness thanks for the support 🙏🏻🖤. I love this stuff

@pungake-games4821 2 жыл бұрын

Hello is there any kit for my 2013 metropolitan nch50 for a stretch kit?

@albinmonterm.3722 2 жыл бұрын

Hello bro. I wish reveno clutch 4 sent mexico city. That’s posible?

@SmOkEdAtKrOnIk420 Жыл бұрын

so whats the ticket to 80mph on my mad dog? already 150 swapped and the complete ncy variator/clutch kit on the way. 28mm carb, and exhaust. can i find it with the 171 kit or do i need to go bigger? ready to spend the money on your site!

@tendonz1 2 жыл бұрын

have you tried working on Kymco Super 8?

@johnthomson6873 2 жыл бұрын

hi what cc is a qmb-b thanks jhn

@ArthVader09 Жыл бұрын

can someone help me?does removing egr can really improve performance?thanks

@RollingWrench Жыл бұрын

It won’t improve the performance at all. It just cleans the motor up visually. And it will fix the backfiring at decel. It’s nearly impossible to tune with the EGR installed as it introduces fresh air into the exhaust

@juanrmorales44 2 жыл бұрын

nice

@thed9731 2 жыл бұрын

Do they make a metal battery box cover for gen 1 or 2?

@EndritAl 2 жыл бұрын

I have 125 cc GY6.Does changing to 160cc make more fuel effiecient also faster?

@eyeswideopen4888 2 жыл бұрын

Dude I would just like to buy a built engine that would fit my 50cc chinese moped do yall have something like that?

@madrabbit9007 2 жыл бұрын

I noticed you never use anti seize. While working on small block Chevys, I was taught to use anti-seize on any steel bolts that go into aluminum and exhaust bolts. Just wonder why you don't.

@RollingWrench 2 жыл бұрын

The main reason is these are not out in the element and are not exposed to the winter road salt and such. It’s never been an issue.

@stephonyancey3958 5 ай бұрын

Do you guys sell the bike already built

@RollingWrench 5 ай бұрын

No. I have someone that can build it for you if you want

@sullie35 2 жыл бұрын

Also....is this just a stock chinese crank with stock bearings and rod or is the crank forged and with heavy duty good brand bearings and a forged crank? Seen lots of bottom ends roasted from the 171 big bores and wondering if this bottom end has been upgraded to give long lasting performance? The extra impact from the added power and compression I believe is whats bending rods on the Chinese gy6 150cc engines

@RollingWrench 2 жыл бұрын

I haven’t ran into any issues with the stock crank on a 171. How ever upgrading the crank will only improve the longevity

@imcoga 2 жыл бұрын

At What RPM should my 171cc idle??? I'm in AZ in case weather and elevation matters.

@miscprojects9662 Жыл бұрын

I’d pay maybe $550 for a fuel injection kit for a gy6. No reason it should cost a penny more since one for a v8 would only run $1k. Everything on here is a lot for a little gain and still no additional top speed. Faster acceleration seems to be the only major change.

@RollingWrench Жыл бұрын

Sounds like you will be running a carburetor:-(

@rawarrior2668 2 жыл бұрын

Can i use a long case on a scooter that has a short case with out any issues of mounting to the frame

@RollingWrench 2 жыл бұрын

No unfortunately. The shock will be an issue and the look woul be different

@byroncozens3151 2 жыл бұрын

hello there i really enjoy your videos that you put up of the gy6 engine , i have sent you an email about buying a modified gy6 engine from you , but i didnt get an email back from you , do you build engines complete ready to bolt in please , if you could get back to me thanks from byron

@RollingWrench 2 жыл бұрын

Hey dude, no. We don’t do any customer work, we only sell parts. I can put you in touch with an engine builder. Email us. We are off on the weekends and Mondays are cra cra. So be patient

@mizzlethyself 2 жыл бұрын

I have the Vitacci Falcon 250, HELP!

@everythingelectric2767 2 жыл бұрын

I'm waiting to order the monster 90cc big bore it's unclear if my current valve length matters on my dongfang 139qmb 50cc considering the kit comes with a new performance head does it matter or will the kit simply drop in please get back to me so I can hurry and order the thing already I'm sick of hardly hitting 35mph

@jaykoerner 2 жыл бұрын

It only matters if you reuse you current head, otherwise no

@nigelmcclure6440 Жыл бұрын

Bro is this engine is it on your website because I am highly interested in buying it at some point in time brother

@jr.gamer3219 2 жыл бұрын

So I’m planning on buying a 50cc scooter in a couple weeks. I’m only buying 50cc so I don’t need to insure it. I weigh about 300lbs, and I’m 6’4. How much speed could I get stock? I’m planning on using it daily to and from work, less than 10 miles. I have a feeling I’ll need to do a big bore kit, but am definitely buying from you guys after seeing your videos.

@RollingWrench 2 жыл бұрын

Ya you will definitely want a big bore kit. I recommend this kit:www.rollingwrenchdenver.com/products/90cc-monster-big-bore-cylinder-kit?ToPasteboard

@jr.gamer3219 2 жыл бұрын

@@RollingWrench does that still come with the piston rings pre assembled? I noticed in one of your videos they did, but just want to double check for this set.

@RollingWrench 2 жыл бұрын

@@jr.gamer3219 yep :-) it comes exactly like the vid :-)

@jr.gamer3219 2 жыл бұрын

@@RollingWrench awesome. Will possibly be buying in 2ish weeks then. It’s a drop in too right? I didn’t see if it was or not in the decription

@RollingWrench 2 жыл бұрын

@@jr.gamer3219 sweeet! Ya, it’s drop in

@stewartrhaines 2 жыл бұрын

What is the top speed of that blue bike up here in Colorado? Thanks!

@wrongturnmotorizedbikes4604 2 жыл бұрын

I bought a Chinese bike they said was 200cc but the displacement says 168. Is that considered the 171cc?

@cn9936 2 жыл бұрын

That’s 168cc. They market it higher than it is. The 171cc big bore kit is to upgrade a 150cc engine. I just did that!

@senlanguna 2 жыл бұрын

@@MiguelLopez-sj2ib 168cc speed 120km/h ??

@senlanguna 2 жыл бұрын

@@MiguelLopez-sj2ib my Sym duke gy6 168cc made in Taiwan since 1997 ,video kzfaq.info/get/bejne/epyfabSnsc6biIE.html

@thenamescraig 2 жыл бұрын

Take a shot every time he says "this sucker"

@RollingWrench 2 жыл бұрын

You better not. You might not make it to the end of the video. Lol

@ts6640 2 жыл бұрын

So, could I remove the engine on my 2009 Kymco People 50 2T (Two Stroke) and replace it with this product?

@RollingWrench 2 жыл бұрын

No. It wouldn’t bolt up

@bryantmarte8122 2 жыл бұрын

Hello I'm thinking about getting a Honda ruckus quick question though is the dy6 the only motor you can swap in it

@RollingWrench 2 жыл бұрын

You can do a zuma 2t motor as well that has supported parts for the swap

@lomtiptak9519 Жыл бұрын

How much power do these roughly make after the 171 big bore kit?

@RollingWrench Жыл бұрын

16hp ish

@megadawg342 2 жыл бұрын

The stock GY6 150 is around 9hp and 12lbft of torque. What do you think this is rated at?

@RollingWrench 2 жыл бұрын

I can only guess. But I will say it feels like double the acceleration. Top speed doesn’t change much since it’s not geared any different. I will do a comparison with real acceleration numbers and top speed numbers soon.

@AYoungCEO 2 жыл бұрын

Hello i would want to ask a question about performance parts on a 50cc taotao 4 stroke engine , i have put on a : 80cc big bore kit , yellow center spring and springs (1500 rpm) for the stock clutch and malossi rollers i also have ordered main jets for the stock carb . Next i wanna do malossi multivar kit (variator kit with rollers , center spring and sliders) and a malossi fly clutch kit (clutch and bell), what should i do next after the malossi parts ? Thanks

@daantuin3351 2 жыл бұрын

Get a bigger carb instead of the jets, will make it way better. Don't go to big though for 80cc 18/19mm is more than enough

@AYoungCEO 2 жыл бұрын

@@daantuin3351 the stock one is already 18mm , i will see i want to put a 20mm one but time will tell

@sunshinetakeshorse2232 2 жыл бұрын

How CAN I T ONE

@sunshinetakeshorse2232 2 жыл бұрын

I have iceberg

@juanmata1571 2 жыл бұрын

Hey I’m trying to figure out what to order I want to change the stator in my gy6 ruckus should I order the 11 pole kit or the 12

@RollingWrench 2 жыл бұрын

11 pole would be best

@juanmata1571 2 жыл бұрын

Thank you for replying I’m going to order the 11 I checked connection last night and you like always have the best option it’s for the gy6 qmj157 thank you again

@ronbrideau8902 2 жыл бұрын

Congratulations with your zesty rpm revving Big Bore!

@garyclay7140 2 жыл бұрын

Why will a cast piston last longer ?

@helloish12321 Жыл бұрын

Forged pistons expand more when they get hot. They have to design them so that at cold start temperatures the piston is excessively small. It will slap around more until operating temp is reached. Cast doesn't expand so much when hot so the cold clearances can be designed tighter. Forged is generally only recommended for high rpm or turbo stuff. Here I would think it's mostly unnecessary.

@Shauzam 2 жыл бұрын

I just started this vid I really hope this is something I can buy an somebody is selling an I really hope you can show how to put this shit together an can teach if so I will subscribe an like your vids an be here for more knowledge if you got wisdom brother I’m hoping you are.

@jeffkrauss5582 2 жыл бұрын

Do you have parts for the 161qmk or know where and what fits?

@ElPatronGamefarm Жыл бұрын

Ncy Store sells parts for that.

@Chuckpatton 2 жыл бұрын

Hey Matt...do you know the sizes of all the bolts for the shrouds? I had to order shrouds and unfortunately they didn't supply them.

@RollingWrench 2 жыл бұрын

Not off the top of my head :-(

@Chuckpatton 2 жыл бұрын

Damn...alright thanks I'll ask around

@Senor_Splicky 2 жыл бұрын

Hey so I have a super hornet 150 cc I’m 99% sure its a gy6 long. Can you maybe help me confirm that?(I can’t find your old video on it been subbed awhile) My dad was the one who got me the bike and he told me about getting this and doing it with him a couple months ago. I still want to do it but I have to do it by myself though now because he passed away. I’m sure he would have been hype to do it with me. So I just want it to be my summer project and as something he’d have appreciated and loved.

@RollingWrench 2 жыл бұрын

Here ya go :-) kzfaq.info/get/bejne/sMqiqq2TnbOweH0.html

@pimtooksignanddecorate4110 2 жыл бұрын

How many this set ?

@wanmuhammadfakhrullahwan8078 2 жыл бұрын

👍👍😁😁

@donaldbrown3261 2 жыл бұрын

How can I order the hole 171 Big Bore Kit it I'm trying to get the parts to build it with but I need help on ordering the right parts

@RollingWrench 2 жыл бұрын

I have everything linked in the description. The top end by its self or this kit. You can choose

@donaldbrown3261 2 жыл бұрын

Ok thank you keep up the great work 👍 👍👍👍

@keithgreatbanks 2 жыл бұрын

How long before you can do the EFI kit to go with the 171cc kits ? & will you post to the UK 🇬🇧

@RollingWrench 2 жыл бұрын

EFI is gonna be bit…. Maybe a year or more

@keithgreatbanks 2 жыл бұрын

@@RollingWrench I'm guessing its not straight forward to go from EFI to carb with all the electrical stuff 🙄

@RollingWrench 2 жыл бұрын

@@keithgreatbanks I have never tried it, but I’m pretty sure I have a tuner that will work on the new gy6 EFI systems they have been putting in the Chinese scooters

@keithgreatbanks 2 жыл бұрын

@@RollingWrench well that's a step in the right direction for me, you know you are going to have to make a KZfaq video about fitting one for me now 😉 keep up the great video and thanks for your time in replying,

@Gokywildcats11 Жыл бұрын

What's the cost ?

@RollingWrench Жыл бұрын

www.rollingwrenchdenver.com/products/gy6-171cc-builder-engine-kit-long-case?ToPasteboard

@julianarodriguez3635 2 жыл бұрын

The shroud shall be Chrome

@RollingWrench 2 жыл бұрын

They have them :-)

@jbamerican_usnavy 2 жыл бұрын

Is it true that the GY6 kit are all cheap Chinese parts?

@RollingWrench 2 жыл бұрын

eBay and Amazon yes. Our kits are top notch from Taiwan.

@jbamerican_usnavy 2 жыл бұрын

@@RollingWrench I suppose I have to buy a new or used ruckus and convert. It's hard to find one you can buy in FLORIDA

@FirechickenExpress 2 жыл бұрын

How are the dimensions of the head? Is it fatter? Reason I'm asking is because I don't have much room on top of motor on the gen v maddog. My efi kit fuel injector is super close to the under seat pan as it is. Let me know dude!

@FirechickenExpress 2 жыл бұрын

Nevermind on this question, I see you still use the factory plastics, so it must be the same. Mahalo