This performs well for me but there are two issues to watch for. Thread lock prevents one of the issues
Пікірлер: 16
@billy_h_bonney2097 Жыл бұрын
mine has that same groove on the magazine tube, and mine is brand new
@michaeldelrossi4487 Жыл бұрын
I used Emery Cloth and it took that crap right off and smooth!
@anthonypost821410 ай бұрын
Working one one with no side button only the metal bolt release on the trigger guard. It locks back after each shot. The hammer physically moves the lock each time stopping the bolt from going home.
@samuelm4729 Жыл бұрын
I used the base of a drill bit to replace the pin, I seen it done in a different video on KZfaq. It has no problem after 1100 rounds threw it since then
@feralbigdog Жыл бұрын
what size drill bit?
@jonathanclark665210 ай бұрын
Nice tip. Much appreciated
@dewaynereynolds82282 жыл бұрын
You can buy pins that will work. I had to replace mine. Hardware store
@neuromanglers2 жыл бұрын
Those coiled pins are not easy to find locally
@dewaynereynolds82282 жыл бұрын
I drove it in
@truthlight28162 жыл бұрын
@@neuromanglers I went through Hatfield myself. I wish I could get a bag of them from somewhere.
@Tacoma19892 жыл бұрын
When that breaks what happens to gun. I have the 12 gauge model and it’s getting stuck all the way back
@neuromanglers2 жыл бұрын
Mine just would not fire, a bit of the roll pin fell into the trigger mechanism and would prevent the trigger from pulling
@tonycoker4746 Жыл бұрын
I looked at one of these 20 gauge shot guns today, and the problem it had was the bolt wouldn't lock back, every so often it would lock back but when you pointed the gun down the bolt would release. I am just curious if the pin failure that you mentioned would cause this problem?
@neuromanglers Жыл бұрын
yes, one of mine did that and was the same fractured pin issue...it would sort of work...some times
@charlesnorman10722 жыл бұрын
How many shots are you getting before these issues. I just ordered me one.