Added Hot Racing Bumpers and skid plates to the E-Revo 2.0
Пікірлер: 44
@Chongy285 жыл бұрын
Doc's Hobby Shop 👌 Just bought my E revo from them on the weekend. My first RC. Thanks for the vid👍
@667Gurba4 жыл бұрын
Cool upgrades! 👍 I have the full HR skid plate kit + full HR axles and center shaft. Good stuff. 🙂
@Crewchief2275 жыл бұрын
Oh I've been drooling over hot racing axle carriers, and t-bone wheelie bar, and skid plates
@offroad1911 Жыл бұрын
I’ve got the exact same truck on order and I’m kind of surprised that Traxxas has used the same paint scheme for this long. I also ordered orange skids and front and rear bumpers in orange. I ordered the blue RPM a-arms too.
@BBradCO3 жыл бұрын
Great video, thank you for sharing. Appreciate the info. :)
@InTheDogHouse3DPrinting4 жыл бұрын
I run RPM parts on all of my Traxxas rigs. I do have some aluminum parts on them as well. I won't run aluminum arms, but I run aluminum skid plates, and shock towers. My arms and bumpers are RPM. I have a few cans of compressed air for doing small cleaning jobs like what you are doing when you are replacing the parts. That way I don't have to fire up the compressor. It saves me a lot of time. That is going to be a nice rig, and I will be getting me one at the end of the month for bashing.
@sautso70745 жыл бұрын
Nice informative video. Subbed!
@borgfpv84184 жыл бұрын
Cool video Jason! How are skid plates doing? Are they holding the beats well? I put the protectors (front and back) of T-bone but I don't like it ...
@benprovost62984 жыл бұрын
Could you tell me motor fans brand and wheel/tire combo? Where we can get them? Also, love the vids
@TruSwagTv24 жыл бұрын
Badass build
@rommelgonzales15173 жыл бұрын
nice video mate..i noticed the net covering with zip...looks cool and more protected from dirt,,, did you made it or bought somewhere?
@michaperey3 жыл бұрын
Nice. which tires you use ? They are a bit bigger ? do you feel that in driving ?
@rotz3575 жыл бұрын
How are the tires doing. Any problems with the wheel hex wearing out
@MASSIVEJUNK694 жыл бұрын
Do you have a link for the upgraded parts you installed. I wanna do the same with my e revo vxl
@Krombop.M3 жыл бұрын
Proline 3.8 trenches in tall grass = I blew the plastic servo gears, motor gets hot so I added a fan. Other then that. I bash the crap out of it and have had no issues.
@jordanclements3844 Жыл бұрын
It may not make it stronger really but it definitely looks cleaner and will last longer to the bashing.
@blaketundra32163 жыл бұрын
Sick
@JMSchwartze773 жыл бұрын
So is the front and back the same. They look like it. I have the rear but not the front cause they r sold out. Wondering if I can just buy another rear for the front
@savageyoung25634 жыл бұрын
Best batteries for speed and performance on this car? Sz and brand plz
@petechipps97704 жыл бұрын
New subscriber. Really like how you don’t time lapse through the installs. 👍
@curtishubbard9074 жыл бұрын
I just got the 2.0 any info whould b nice
@jamesgeorge6094 жыл бұрын
Great stuff,,,,,,,good info,,,,I have the same units you have,,,,,,where did you get that Drexel drill and the bits you have,,,can’t seem to find them....thanks jim
@JasonPerrinRCVlogs4 жыл бұрын
I don’t think they make the Dremel drill anymore. The bits are from an Align kit. Came with the bits and driver.
@larrygaskins21005 жыл бұрын
like the upgrades bro,,,,do those covers keep more heat in??
@JasonPerrinRCVlogs5 жыл бұрын
Yes. I have not noticed any issues with the Revo. But the Rustler went into thermal after 10 minutes on 3s. :(
@omaralagna92314 жыл бұрын
Is it possible fit 120 rocker arms on e-revo 2.0? Cheers
@lukeglavan2 жыл бұрын
hey man what kind of cooling fan set up is that. is that from amazon
@andrecunha52324 жыл бұрын
Hey Jason, I broke my front lower bulkhead where the screws from front chassis skid plate go in. Upgrading to metal chassis skid plate could probably make it more likely to break again in case of crash as metal have no give. What do you think?
@brutallyaverage82933 жыл бұрын
Yup, generally aluminum upgrades are for bling and cause more damage. Only aluminum upgrade worth it for erevo 2.0 is rear chassis brace. Possibly axle carriers.
@adamj89852 жыл бұрын
no the reason is because you need longer screws, look at them the hr skid plate is thicker where the screws are
@respectyourgrandma24104 жыл бұрын
Why do you not put a link to the parts in the description?
@EXTREMERC4164 жыл бұрын
Those upgrades are bassicly to do ad for hot racing😂
@user-no4sm6up5c4 жыл бұрын
until the first fall))))🤣😂
@danialphaomega4 жыл бұрын
I'm in +- $2,000 in my eREVO 2.0 (2018) model that's like less than a month old.
@InTheDogHouse3DPrinting4 жыл бұрын
Is it going to be a shelf queen? Or will you actually bash it? What all have you added to it for it to be that much in parts?
@danialphaomega4 жыл бұрын
Where did you get that motor heatsinks and fan from????
@JasonPerrinRCVlogs4 жыл бұрын
eBay. Search “yeah racing twin”
@Crewchief2275 жыл бұрын
Also, nice badlands, have the same ones on mine, lol. Also, check out my custom body. imgur.com/gallery/VdjJA5q
@adireu573 жыл бұрын
Ist the 1:10
@ksprr68564 жыл бұрын
These "upgrades" are not suited for bashing around in skateparks / woods.