How to Fix 996 911 On-Track Overheating. Project Beef, Ep 6
Рет қаралды 608
5 ай бұрынHi there, and thank you for watching FunAhead TV!
In this episode, we begin putting the reassembly phase of Project Beef by implementing the first big improvement and getting the car that much closer to completion with the installation of a Center Radiator!
This is a big upgrade to the cooling system of any 996, 986, 987, or 997 Porsche. It's even something that is done to newer Porsches as well and is essential when utilizing one of these vehicles for track use.
For additional help, here is the Pelican Parts forum post I referenced in the video with step-by-step instructions for 996 / 997 center radiator installation:
www.pelicanparts.com/techarti...
If you have any questions, please drop a comment below and I'll respond accordingly.
For business inquiries, please contact David at: vfgautowerks@gmail.com
Thank you so much for watching,
David
Disclaimer: Videos are for entertainment purposes only. Any advice, instruction, or information given in this video is to be taken and applied at your own risk. Always do your own research before working on your own vehicle.
@johntrotter3512 4 ай бұрын
Looks very good.
@FunAhead_TV_Official 4 ай бұрын
Thanks John!
@erwindumay9143 5 ай бұрын
Good job!
@FunAhead_TV_Official 5 ай бұрын
Thanks! It’s starting to come together.
@GC-kp7lo 5 ай бұрын
Nice job! Been appreciating your videos!
@FunAhead_TV_Official 5 ай бұрын
Thank you! I really appreciate you watching along.
@GC-kp7lo 5 ай бұрын
@Fun_Ahead_TV_Official since you have the engine out, consider adding the 997 3.8 oil cooler as well for additional cooling. I will be going thru this same exercise in the next couple of months.
@FunAhead_TV_Official 5 ай бұрын
Thank you for the tip! I had not previously heard of that as being a possibility. Fortunately, my car has always had a close correlation between coolant temp and oil pressure with the stock cooler, even on track. I'm thinking that the center rad will do a lot to help keep oil temps down... still wouldn't hurt to throw the kitchen sink at it though haha. What are you planning to do for your car? Similar build?
@GC-kp7lo 5 ай бұрын
@Fun_Ahead_TV_Official No rebuild. Bores are in good shape. Have owned my 996.2 a long time so it's a continual process of servicing and refreshing parts. When new and better solutions come out, you just fit it into the service cycle. I have tracked my car since 2004. Key is upgraded IMSB (Sokution or Retro), lots of oil supply (2qt deep sump), high quality oil that can handle heat, lots of oil changes to keep the oil fresh, high quality aos that can handle the flow of oil (UAOS Track version), and keeping water and oil temps contained.
@FunAhead_TV_Official 5 ай бұрын
That’s fantastic! Sounds like you’ve got a great car and you do a great job keeping it in tip top shape. Nice to be chatting with a fellow 996 / M96 fan!
@michaelfilipek977 5 ай бұрын
Mind sharing the part numbers on the hoses?
@FunAhead_TV_Official 5 ай бұрын
996-106-666-56 is the right side hose. 996-106-665-58 is the left side hose. The entire center rad kit and part numbers can be found via Pelican Parts.
I Do Cars
Рет қаралды 64 М.
Fourwheel Trader - Car depreciation analysis
Рет қаралды 247 М.
Porsche Club of America
Рет қаралды 34 М.
HIA Shorts
Рет қаралды 4,6 МЛН
PavePro Asphalt Solvent and Release Agent
Рет қаралды 4,8 МЛН
# мотоТаня
Рет қаралды 7 МЛН