This was great. Very clear, fast, seems very doable. AND NO CHIT-CHAT! Just great. Thank you.

Thank you for creating this video.

Thank you! Took the mystery out of opening mine as I was afraid to break the clips.

Thanks very much.... I can't believe I've been paying someone a fortune to do a crap job.

Good instruction video. A tale of what happened to me: there is a 28mm filter like strip on top of each filter [that is designed to distribute the water into the main filter so I'm told] and during a strong wind day this was blown off the top of the main filter on the north side of our unit so with the unit running water was blown and sucked into the chamber and eventually leaked onto the plaster ceiling of the room below damaging it. On buying a set of new filters I used the old pins to poke through the this piece into the main filter thus preventing this happening again.

This is an excellent video, thanks for posting.

Awesome! Will be doing this myself soon.

Thank you for this very helpful video....

thanks for the video! you save me $$$. Technician are rip off here in Australia.

Thanks a lot ,May God bless you

Straight to the point.

Great diy video thanks so much.

This is awesome video. Thank you so much.

Good onya bloke, was looking for an easier way than my thumbs with the retaining discs - cheers :)

Great video, thanks.

To the point.... Love it

Easy, thax for that clip. 👍🤙🇦🇺

Thanks so much!

Excellent mate

Thank you sir!

thank you

VERY USEFUL. THANKS. APPRECIATE YOU GOING TO TROUBLE AND HELPING ME SAVE $$$

Thank you very much for your 100% recommended video. a question how does it drain?

Very profesional!

Breezair.. TOP of the line cooler.. i had a Master cool and a Breezair in New Mexico.. i ended upi Closing off the monster Master air .. Breezair cooled the whole house 1600 sq ft.

Thanks

wow thx

thanks mate, great vid, do you know how to reset the wall power unit as mine says "service" and the unit will not work, any help will be appreciated.

If you want it done right learn and do it yourself, DYI! Too many Techs in the States don't know or are too lazy to do it right! I have one pad in the front which the air is drawn through, very simple. Fresh air through a perfect wet media pad to filter the sand/dust! Air conditioning circulates stale air! But swamp coolers only work in dry air here in the U.S.A. desert southwest

To what humidity levels this evaporative unit works best? Thanks

Great coolers,hard to find parts.

thanks. Perth, Australia?

Mine is never that dirty. I need to do it this year again and possibly adjust the belt too. Can't find a video for that.

The pads and air output are actually warmed up by the continually flow of relatively hotter water that circulates from the water pump. So by stopping the water pumping for very short periods of time, then the pads will become much colder and make the air output colder. Use a Repeat-Cycle-Timer to cycle the water pump on and off, for maybe 1 min on, and then 3 or 4 min off. The air output becomes colder, and energy is saved.

too easy... thanks! Yeah... got quoted $400 for new pads from installer + $200 to come and install. Got them new delivered for $220 including freight.

That was a mess. Mine is never that bad. Fortunately one only needs new pads every 5 or 6 years. I need the drain washer. If you know where to get one.

where can I get the pad retaining disk

how costs one filter?

Cooling pad size for breezair exs200

Thanks, nice video. Do new retaining pins come with the pads?

Got new pads unfortunately they are too high length is right

So i just inherited a breezair with new home purchase, and without knowing this is a top end swamp cooler, i was informed to change the filters, so i did... with basic dura cool pads from Home Depot. I have already tossed the Chillcel and installed the new ones. Will these work for now, or will it damage the cooler?

how often do you need to change the pads?

So the filters really need to be replaced? They can't be cleaned?

thank you