How to Replace Front Brakes 00-04 Ford Focus

Рет қаралды 20,956

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

In this video, 1A Auto shows how to remove and replace noisy, weak, fading, or soft front brakes. The video is applicable to the 00, 01, 02, 03, 04, Ford Focus.
🔧 List of tools used:
• Pry Bar 1aau.to/oec/1AXAA00020
• 11mm Flare Wrench
• 8mm Wrench 1aau.to/obp/1AXAA00011
• 19mm Socket 1aau.to/ojJ/1AXAA00043
• Locking Pliers 1aau.to/oas/1AXAA00139
• 1/2 Inch Breaker Bar 1aau.to/of4/1AXAA00078
• Ratchet 1aau.to/oQz/1AXAA00016
• Socket Extensions 1aau.to/oHg/1AXAA00015
• Torque Wrench 1aau.to/ont/1AXAA00044
• Anti-Seize Grease
• Brake Grease
• 7mm Allen Wrench 1aau.to/o9/1AXAA00007
• Floor Jack 1aau.to/okF/1AXAA00068
• Jack Stands 1aau.to/okG/1AXAA00065
• Wire Brush 1aau.to/oco/1AXAA00079
For More Info visit us at 1aau.to/h/bJt/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 22

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@philipkarlsson1296 4 жыл бұрын

I must say it was a good clean on that bearing ;)

@WoLFSkYBLuE69 Жыл бұрын

Yeah more like a new one.

@taters-no4gj Жыл бұрын

Rather than removing the bleeder screw and having to collect fluids, etc, I've found that if you remove the lid from the brake reservoir bottle in the engine bay, you don't need trouble yourself with undoing loads of other stuff and having to bleed the brakes. You've removed the 'pressure lid' so pushing the piston in can be done with your fingers. Thought it might be of use. Cheers 🙄👍🏻

@ronniefrantzen2397 4 ай бұрын

My favorite person from 1A auto! Very easy to understand and entertaining.

@stevestudley4060 2 жыл бұрын

I always clean and re-grease the caliper pins. Great video. Thank you.

@freedygarza995 2 жыл бұрын

Okay I just needed to know how to change my front brakes on a 2004 for focus but I guess I learned more

@davebuchanan9761 3 жыл бұрын

who else went to the comments to see who commented about how the bearing became brand new quality just by using a small wire brush😂

@emofilipof3150 Жыл бұрын

very nice buddy.my pads squeaked. i made prtial bleed,but finally i made exactly how i must bleed. and today my pads are ok. today i understood how important is the liquid to be new and the bleed right. the liquid must be new,'cos it helps the pads to return and make a gap, so they dosn't touch,squeaks in the disk.thanx.

@wenceslaoarias5441 3 жыл бұрын

Thanks

@barbaramartinez5621 3 жыл бұрын

Is it the same with a 2007 ford focus? I'm working on my daughter's today

@1AAuto 3 жыл бұрын

+Barbara Martinez We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c