How to replace gear and clutch cables on a Vespa vgla1t GL 150
Рет қаралды 7,473
2 жыл бұрынIn this episode we mount a steering lock and change the gear and clutch cables on the 1959 Piaggio Vespa 150 vba touring
Don’t forget to subscribe and like 👍
@brobinson8614 Жыл бұрын
Thank you, How do you get the clutch outer cable back in through the handlebar to the clutch hand lever position? as thats very fiddly
@Nordicexplorer1 Жыл бұрын
We’ll that’s very fiddly. And as I mentioned the thicker sip performance cable didn’t fit due to the fact that it’s so narrow in the handlebar. But you must push it in from the speedometer direction towards the handelbar all the way against the stop where the outer cable should be. Also make sure your handlebar is close to neutral position, if it’s to far of your holes in the handlebar won’t line up and it will be harder to push it through. And then you can push the inner cable in from the lever direction all the way back.
@Nordicexplorer1 Жыл бұрын
Have a look at this video then you might understand what I mean. kzfaq.info/get/bejne/fdGZbN1z2ZPbh58.html
@Nynas19 2 жыл бұрын
kan jag ha hört dire straits i bakgrunden kanske?
@Nordicexplorer1 2 жыл бұрын
Det var väldigt observant 😁👍
Infinity Circus
Рет қаралды 4,1 МЛН
Eduardo Esteban Caballero
Рет қаралды 24 М.
Mechanic Base
Рет қаралды 436 М.
Marius Betsch
Рет қаралды 33 М.