#Valve_clearance #Tappet_clearance #Valve_Lash How to tell if you have wrong valve clearance Valve clearance Tappet clearance Valve lash
Пікірлер: 23
@gixxis32647 ай бұрын
Taken ages to find this information in such a forthright manner ; straight to the point & no drivel - Thank You
@5minuteprojectideas10 ай бұрын
Nice. Thank you for sharing.
@jeeromonster8 ай бұрын
Very informative video buddy, thank you.
@TheAbJGarage8 ай бұрын
Glad it was helpful!
@rastabathu25269 ай бұрын
Thank you brother
@TheAbJGarage9 ай бұрын
Welcome
@cruisecontrol69384 ай бұрын
Little something I'm going through, if all of your exhaust valve clearances are too tight, keeping the valves noticably open, you will have glowing red exhasut manifold over time. My VQ3.7L vhr is supposed to be between 0.011-0.015... all of them are 0.008 after lapping the valves. Im a rookie
@TheAbJGarage4 ай бұрын
Indeed! Thank you very much for sharing your wonderful experience!
@davidgibson6464 ай бұрын
How would oil get in the cylinder from the valves?
@TheAbJGarage4 ай бұрын
Wrong valve clearance cannot directly cause oil leaking. However, if the valve clearance is too tight or too loose, it can cause engine performance issues such as poor fuel efficiency, misfires, and increased wear on engine components. This increased wear can lead to oil leaks over time. Tight valve clearance in conjunction with bad valve seal can cause oil leaking into the cylinders. Wrong valve clearance alone won't!
@user-bt4ok7ml5b5 ай бұрын
Well expland
@TheAbJGarage5 ай бұрын
Thank you very much!
@mr.knownofficial9 ай бұрын
Hi i have ns200 should i do valve clearance i have run my bike 17000km my ns200 2020 model
@Pratham40sАй бұрын
anual suggests every 2nd or 3rd service you have to check valve clearance and adjust accordingly. no service center does it as they are not confident of their work plus they will only do it if there is a sound
@jorgeluna79142 ай бұрын
How can i tell if the valve adjustment was performed in my car?
@TheAbJGarage2 ай бұрын
The only reliable option is to measure the clearance and confirm yourself! If you hear increased tapping obviously the clearance is out of order.
@jorgeluna79142 ай бұрын
@@TheAbJGarage That is what I was afraid of, thanks for the reply.
@nishatkhan5713Ай бұрын
My engine is not starting would it be because of this
@TheAbJGarageАй бұрын
I don't think so! Valve clearance issues are not known to cause a no start situation unless they are extremely off, which usually happens after cylinder head reinstallation. Please look for either fuel or ignition related problems, those are known to cause no start situation
@nishatkhan5713Ай бұрын
@@TheAbJGarage what should i do i just did a gov delete and added a flywheel with stock key and carb there is spark and fuel
@nishatkhan5713Ай бұрын
@@TheAbJGarage i checked the valves and the right one was off the rodi pit it back on but did not adjsut it