How to Using Bluetooth to Transmit Telemetry TBS Crossfire & ExpressLRS

Рет қаралды 10,981

3 жыл бұрын

DIY how to make TBS Crossfire & ExpressLRS bluetooth telemetry.
In this tutorial I use the following components and web sites. Please note that the links to the components are affiliate links.
1. Geekcreit® HC-06 Wireless bluetooth : bit.ly/bluetoothHC06
2. USB to TTL STC: bit.ly/ttladapter
Software & App
- Termite : www.compuphase.com/software_t...
- Telemetry Viewer: github.com/CrazyDude1994/andr...
-- AT commands --
AT
AT+NAME=yournamehere
AT+PSWD="1234"
AT+UART=115200,0,0
AT+ROLE=0
Music by ES.CE - Monsters

Пікірлер: 78

@TheodorosBako 3 жыл бұрын

I got it to work!!! The video is missing a lot of info. 1. You need to power the BT module with 5-6v (I got 5v from the R9M module uart) 2. You need to save the latest LUA in the Taranis sd card 3. You hane to "Discover new sensors" from the Taranis menu 4. A signal inverter in-line is needed for the Taranis UART to be able to communicate with the BT module 5. For the artificial horizon to work (in Telemetry Viewer app) you have to set frsky_pitch_roll=ON in inav Have fun!!!

@akkarawinampin7944 2 жыл бұрын

Is this work for TBS crossfire with xd9?

@TheodorosBako 2 жыл бұрын

@@akkarawinampin7944 It works with CRSF as-well

@akkarawinampin7944 2 жыл бұрын

What bluetooth baudrate do you set? My problem still not work with CRSF. Please.

@siogana 2 жыл бұрын

How to do signal inverter

@jfsaraceno9265 2 жыл бұрын

@@siogana use a not logic gate

@wanglanyu408 2 жыл бұрын

真牛逼，感谢老铁分享

@oneistar6661 2 жыл бұрын

Music made me subscribe 1000 times

@staydown.normal5323 Жыл бұрын

do you think it is possible to attach the usb wifi tranmistter to your drone so it can be used as a remote id.

@madladdan 10 ай бұрын

Do you need to use a uart or can you solder it directly to the external module?

@jhonkfpv2209 3 жыл бұрын

amigo puedo saber que inversor estas utilizando?

@ehsankeshtgar6734 Ай бұрын

What app other than telemetry viewer works with it? Is there any iPhone app that works ? I could not find this app in apple store ?!

@alexandrugroza839 2 ай бұрын

Hy, i have an flysky fsi6x radio with flashed OpenTX on it. I have set serial port to - telemetry mirror, but the back port usb cable to pc doesn't get recognised as a uart port on pc.. Telemetry to FC work, i get telemetry info on the radio screen, but not forwarded trough the cable so that i could read them on windows pc.. USB connect in joystick mode is getting detected as uart 5, but telemetry mirror standalone, doesn't parse info to the usb cable.. am i doing something wrong ? i have seen HC05 bluetooth modules used for this, soldered to a pad on the motherboard, is that the same serial pin as for the usb plug?

@tom1907 2 жыл бұрын

thank you

@yousefsaadeh7144 2 жыл бұрын

Why you change the baud rate to 115200?

@ChristopherF_1971 2 жыл бұрын

What about those of us that have the full size crossfire with built in bluetooth. I could never get telemetry Viewer app to fully function with my Xf full TX with bluetooth connection

@kaikart123 2 жыл бұрын

Manteb banget nih

@ebikefe 2 жыл бұрын

Thanks for sharing. Question: did you need to wire in a signal inverter to get it to work?

@uwaisgameplay994 2 жыл бұрын

@m.nasrat6311 2 жыл бұрын

everything works gut, only the altitude is shown wrong Any idea?

@pojiajaib Жыл бұрын

Om aps dahsyat 😁

@theodorosmpakogiannis330 3 жыл бұрын

Tried your tutorial and all went well but when I try to check the BAUD RATE change to 115200 I get no response!!! I get an OK when I send AT+UART=115200,0,0 but then it only responds at 38400. I have already tried on two different modules. Any ideas??

@LarsTil 3 жыл бұрын

do you use HC-05? this seem to has a fixed AT mode Baudrate of 38400.. same for me, I understood that the UART setting is for the BT mode only. I get it connected, but telemetry viewer is not showing any data. If I monitor BT serial stream coming from the module, there is a repeated output and in the middle it says FRSKY X&D16 but I dont get Telemetry Viewer (or similar apps) to work.

@TheodorosBako 3 жыл бұрын

@@LarsTil Same with me. I connect but no data. I had it working in the past through the uart of the R9M module. Back then, a signal inverter was used but I dont see that being necessary innthis case!!!

@dustypropss 3 жыл бұрын

Does Jumper T18 or Radioking TX18s capable of doing this?

@KUSNENDARTUTOR 3 жыл бұрын

jumper t18 not support

@serang 2 жыл бұрын

Terimakasih pak, Kus. Selama ini saya salah baud. DI GIthub Crazy dude ditulis baud 57600, tapi ternyata salah.😁

@KUSNENDARTUTOR 2 жыл бұрын

👍

@skyzeus3198 3 жыл бұрын

Which firmware are you running for TBS Crossfire & TX16S ?

@KUSNENDARTUTOR 3 жыл бұрын

newest

@madladdan Жыл бұрын

How is the telemetry data sent over bluetooth? Does it use packets?

@madladdan Жыл бұрын

Also how does the app know how to decode the data to use.

@mikenigrelli Жыл бұрын

Это круто! Как вы думаете, подойдет ли это для отправки данных телеметрии на компьютер с помощью модуля Happymodel ES900TX с ELRS 2.0/3.0?

@TinhNguyen-ns1ut 3 жыл бұрын

can it use with build in bluetooth TX? i mean no need HC5 and programe

@ruthikanvekar4565 3 жыл бұрын

Yes

@KUSNENDARTUTOR 3 жыл бұрын

yes, but many people failed

@ruthikanvekar4565 3 жыл бұрын

@@KUSNENDARTUTOR I saw a vid , where he has used Frsky bluetooth module, (available on AliExpress)... On his tx16s main board, where pads r available for bluetooth! (Besides scroll board)

@kaikart123 2 жыл бұрын

@@ruthikanvekar4565 It's a hassle when you can just plug and play it

@zlachannel8674 3 жыл бұрын

tutor buat tango sih om,,,herhhe

@zlachannel8674 3 жыл бұрын

om frekuensi si bluetooth akan mempengaruhi fpv feed atau tx kita ga,,bluetooth kan 2.4-5.8ghz bukan

@KUSNENDARTUTOR 3 жыл бұрын

tidak

@jankerzone 3 жыл бұрын

Kalo modul bluetooth disimpen di dalem remot bisa & ada port nya om? Maklum ga pake tbs yg full

@KUSNENDARTUTOR 3 жыл бұрын

pake remot ap

@jankerzone 3 жыл бұрын

@@KUSNENDARTUTOR radiomaster oom

@siogana 2 жыл бұрын

Ini pake hc05 yg beredar di olshop lokal bisa gk om?

@KUSNENDARTUTOR 2 жыл бұрын

iya memang it yg sy pakai

@MiniatureWorld_01 3 жыл бұрын

Keren kang ! Kalau upload waypoint ke telemetry viewer bisa nggak ya ? Jeren tuh kalau mapnya bisa dioverlapping sama waypoint.

@KUSNENDARTUTOR 3 жыл бұрын

bisa

@MiniatureWorld_01 3 жыл бұрын

@@KUSNENDARTUTOR gimana caranya kang ? Ada link tutorialnya ?

@m.fajarisrowanda1382 3 жыл бұрын

Di tunggu toturialnya om 🤩

@cors1977 2 жыл бұрын

Is Compatible with qx7?

@KUSNENDARTUTOR 2 жыл бұрын

yes

@LalapopApple 2 жыл бұрын

@@KUSNENDARTUTOR cant get it to work -.-

@alfanalfarisi8029 7 ай бұрын

Ini buat ke mission planer bisa ga om...?

@KUSNENDARTUTOR 7 ай бұрын

blm pernah coba. biasanya sy pakai aplikasi tracking di android

@yongfpv6239 3 жыл бұрын

t16 have an UART？

@KUSNENDARTUTOR 3 жыл бұрын

@ChristopherF_1971 2 жыл бұрын

Hes not very clear in this video unfortunately. This whole telemetry thing is a cluster F imo. No one seems to no what go where. If you have R9M connected to your T16 you can just buy an inverter and connect straight to the back of the R9M module. Only way I can get telemetry to work with external devices like android. Crossfire bluetooth in full TX sucks and never stays connected or you only get sat count that it. He stated in this video it works with crossfire but isnt very clear on how.

@ebikefe 2 жыл бұрын

@@KUSNENDARTUTOR Did you need to wire in a converter for TX16S? Or thats only for the T16 / Taranis)?

@ofekz360 3 жыл бұрын

On 3:23 what are those two circuits you add on the wire between the BT and the X9D?

@KUSNENDARTUTOR 3 жыл бұрын

no, just sample photo. no need circuits

@ofekz360 3 жыл бұрын

@@KUSNENDARTUTOR thank you for the reply, so I just need to connect s.port + and -?

@theodorosmpakogiannis330 3 жыл бұрын

@@ofekz360 Can the HC-05 work on 7+ volts of the Transmitter battery???

@ofekz360 3 жыл бұрын

@@theodorosmpakogiannis330 that’s what I am trying to understand as well, from what can find on the internet it’s rated for 3.3v, so I don’t understand how he claim that there is no need in extra circuits

@TheodorosBako 3 жыл бұрын

@@ofekz360 I powered mine from the 5v output of the R9M module and only connected the Rx wire to the UART.