Fantastic video!!! No nonsense, just the facts. So helpful. Thank you!!!

Just what I needed Cliff, saved me hours of work. Cheers

Thanks Cliff! I just bought this same vfd and needed some clarity on programming the functions and the switching terminals. I have a Teco vfd on another motor and found Clough42’s video on it, but was not expecting to find one on this model so quickly. Thank you for taking the time to help others out. Well worth a subscription from me, as I’m sure you must have other helpful information as well.

Had got the motors rewired, got the inverter instructions but not got the confidence my interpretation was right. Watched your video and it all fell into place, up and running in an hour. That's the lathe and a wreath wrapping machine sorted - just need one for emergency stops for the bandsaw now. Thanks.

A very good video Cliff.Clear and concise.Just what was needed.

Really handy video that cleared up some confusion for me. Very well presented straight forward and easy to follow. Many thanks

Thank you so much Cliff that's so clear.It's the first time i find so good explanations, we at lest know how to use the connections and the programing. Great video.

This video really helped me out a lot. I have a slightly different VFD but has the exact same control, display and instruction sheet. (I have the XSY-AT1, which was $60 on eBay new). I'm testing it on a 3 phase washing machine motor that wants 195v and 310 Hz. Couldn't quite figure out the programming on my own, but now it's clear. Thanks!!!

Just what I wanted to see, good video no fluff all business, clear and precise. Thank you.

Thank you so much for this. Everyone was saying it was easy to wire up but I am one who didn't know how to do it so it wasn't easy for me. I think I can handle it now because of this video.

Great video Cliff, just got myself the same VFD but for a 1hp motor and was scratching my head with how to wire up the external controls, now have all my questions answered. Top job

Just got a VFD myself. It didn’t come with an earth terminal so had to wire it to the fins. Also came factory set for 3phase input. I do want to wire remote switches so, a timely video. Thanks Cliff

Just got a three phase vfd to install and wire it for potentiometer control.This video came handy and well explained in details. Thanks

Thanks so much Mate from the Northeast U.S.A.! I had made some good guesses but your thorough demonstration inspired confidence that I wasn't going to let out the magic smoke.

This is exactly what I needed! Thank you so much for making this video!

Fantastic video. I'm adding a foot pedal a VFD inverter identical to yours and your video has made things a lot simpler.

Thanks for that Cliff, it's very helpful because my instruction leaflet has disappeared into the black hole! Subscribed!

As you said easy if you know how, now I have a much clearer understanding. Thank you.

brilliant video very helpful just purchcased one of these units after watching your video, ordered it last week turned up today took about eight days to deliver, was expecting three to four weeks delivery time, so pleasantly surprised when it turned up, got it working tonight , watching your video now on how to adjust the speeds thanks for your video i found it very useful

Great job for those in the field.... Great illustration

What a clear and easily followed video . Thanks Cliff ...

Thanks Cliff! I'm using my VFD on an old Startrite bandsaw which is now up and running thanks in large part to KZfaqrs like yourself. Funnily enough I started with a Steve Jordan vid and then came here, only to find he was here before me in the comments! Now subbed to both of you. Cheers!

Cliff I have been scouring youtube for this info. Thank you so much for a precise and clear video. Regards pat

Best explanation i have found so far. Thank u my friend...

You are an absolute star, that is crystal clear to me now, many thanks

Excellent video, thanks for taking the time to explain this. I can continue to set mine up now. Regards Steve

This the best video ive seen on this plain Engish. Thanks.

congratulations for the explanations; they were very clear even for me who do not understand much about electronics

Great video Cliff, very easy to follow on the programming. I just installed a replacement VFD (youtube vid posted) on my Lathe and Mill. Finding the program parameters was a little awkward and some of the instructions where a little bit ambiguous but got there in the end. Cam

I just bought the same inverter, looking forward to doing this on my metal lathe.

Good video Cliff. That was an easy VFD to wire up. I had an older vfd on my Tom Senior milling machine, then i decided to mount a bridgeport head on the over arm and of course you need to run the motor both directions for the high and low range. It was a nightmare to wire it up, you needed diodes and all sorts of crap to get it to work.

I bought this vfd because of this video. Thank you sir

Thanks, based on this brilliant vid I’ll get a couple of these VFDs to convert a 2 x 2.6kw motored car hoist to single phase

Thank You Cliff, it was very useful explanation

Thank you for showing things clearly

Very good. I do have to warn people that some VFDs are very industrial, even if the don’t cost much. With them, the manuals can get very complex and difficult to understand. I advise sticking to these simpler models.

Great tutorial Cliff and gives me a very good start to installing one on my Myford. One thing puzzles me though regarding the "Common" connection used. There are two of them and for the potentiometer connection I was about to use the one adjacent to the associated Vi! and 5V terminals, but you chose the other one at the extreme RHS. Then you used the middle one for the common on the switch with X4. It may be that these 2 "Commons" are connected together, in which case it makes no difference, but I would appreciate your comments.

Thanks Cliff...just what I was looking for ...thanks for sharing...

it,s made sense to me Cliff , very helpful.

HI Cliff, Great video just set my AT1 up, I have discovered that if you went to use forward and reverse remotely you must use X6 this will only reverse when the Run switch is ON if use the other the motor will run in reverse even though the Run switch is OFF not sure why , at least that what happens with my VFD and its the same as yours just 1.5KW version.

Excellent video. Thank you Cliff The ability to remote start it adds a lot of possibilities. I have the 4KW version. It has the same manual but slightly different wire connection points. Close enough. There is only 1 common but there is -5V which I am sure is also common ground. I did not test this. YMMV. My mill has 2 motors. One to run the spindle and the other to lift the head. Using a couple of double pole double throw switches and a few relays I can switch the motor that is going to be used and select a speed using X1 or X3. with a DPDT switch to run the mill or raise and lower the head. I don't care about VFD reverse because the mill has it already via relays. I notice that my VFD would ramp up very slow and ramp down very slow where as Cliff's VFD was rabbit fast. Ramp was 3-4 seconds either way. So I went into parameter 34 and set it to be 60 hz/s. ( it was 5) Now it starts almost instant. Went into parameter 42 and set that to be 150hz/s so it shuts off very fast. Ramp down is instant and so is starting for that matter. I will do this for the speeds I am going to use as well. I am told that these VFD's don't like to have the motor disconnected when they are running. It will eventually destroy the VFD. The reason is that the VFD needs to bleed off the power it currently has so it needs that motor to bleed the power to. Failure to bleed down the power means there is still power in the VFD when the contacts open and this will cause arching across the transistor contacts and you likely cannot replace the transistor. I will be incorporating an Arduino to make this work a little better. What this means is that I will add code and relays to connect the desired motor to the VFD wait 1 second, and start the VFD. When the motor is to stop I will stop the VFD wait 1 second and disconnect the motor. $40.00 in parts. I would hate to blow up the VFD. I also went into P12 stopping modes and set it to zero so the motor coasts to a stop like the designer probably wanted. I noticed that jog button does not work on mine once you go to remote so I will use P28 Speed 2 to do this and set it for 32 which is the minimum frequency that my motor will start. Put it on a DPDT momentary switch for jogging back and forth. Thanks again Cliff. I figured there was a way to do this stuff but was very hesitant. Your demo helped me immensely. Cheers EDIT: If you set the P34 - P40 which is rising velocity ( ramp speed ) too high you may end up tripping out the VFD on overload. Setting this to 60hz/s on my mill which is a 2HP motor driving a spindle and nothing else creates no problems but might if you were to try and start something heavy like a fan or a pump. In that case put in a smaller number for this parameter.

perfect thank you been looking everywhere for this info. subscribed

Ian , cliff you legend i just found 2 of them in the bin and o brougth a laid and need to learn how to wire it talk about faith and this pops up thanks for this

Thanks for this, it is simple when explained.....I wish it it was more obvious with the manual.

That was a great help ,thanks cliff !

Thank you for the detailed explanation!

This is excellent explanation and i am well understood

Very helpful video thank you very much. Just one thing if you are just using an on off switch use the x4 and com like you said but only change the on off programming to external I was pulling my hair out trying to figure out why my saw was turning on but no rotation and finally a light bulb went off and I realized that I had to let the vfd manage the frequency LOL!

I knew i would love this video within 20 seconds.

Fantastic. Easy to follow simple explanation.

Thanks Cliff for a great video.

Just wired mine as per your instructions perfect THANKS

Excellent video Cliff, just subscribed

Thank you very much sir. That was very good and informative video.

Thanks so much. was struggling with my vfd

Brilliant mate, nice job, very helpfull

Thanks cliff very helpful fella great help

Thanks, i bought VFD and i need to wire pod, this will help

Great explanation. Glad I saw this.

Thanks Cliff, Way better than the Chinese instructions it came with!

Very helpful video Thank you very much

Thanks, I'm planning on doing this to a pottery wheel.

Thank it is clear and well explained. However to be sure, how I have to wire up an emergency stop? Thanks in advance Eric

Great explanation. Thanks

Thank u i learnt very well

Hi Cliff, I notice this project is a few years old now but I've just bought the same VFD to put on my 3 phase Fobco drill press. I've sorted most of it out but wondered if you ever wired up an emergency brake switch. After doing tests on it all day I am now convinced mine has a firmware program fault - reverse jog and emergency stop don't work. If you haven't done this, it is pretty damned impressive. Just connect a simple push button to any free set of the 6 contacts and set it to 19. You just clear it by pressing the resset on the panel. By the way, if you ever do another one, there is no real need to wire up your own NVR arrangement - the VFD frops out if power is lost and stays inactive when power is restored. Thanks for the video - let me know if you try the panic button. Will

Hi . Very good thanks. How to add an auxiliary fan as connector TA TB TC are missing on tgis inverter. Does we van use any X to add that?

Wow, it is very helpful.

Great info thank you.

Cliff Thanks, for the video very informative with clear information. I have an issue with my VFD (AT-1) I have it set up on the bead roller that I motorised. I have a new dual-motor running delta through a reduction gearbox 30:1. I running a Pot foot pedal however I need a little more torque when I switch it on it dose not show zero on the screen I think I have my settings wrong for this set-up. Can you suggest what to try Regards Allan (Aust)

Usefull video ! I have a question. Is it better using a 220V delta configuration (XSY-AT1) for tool machines i.e. a lathe or a 380V star configuration (XSY-AT4 as in this case) ?

Thank you so much sir!

Excellent. Thank you

Hi Cliff, great video. Is the for ev switch just a simple rocker switch?

As you say, It’s easy if you know how, and now I do. Cheers.

Great info thanks

Hi Cliff - am in the process of also going 3 phase motor/VFD on my Myford. Have the motor ( a new 1 HP 3 phase ) but am unsure which size VFD to get - is it alright just to get a .75KW one or should I get a larger capacity ( say 1.5KW ) so that it isn't running at the limit of it's own capacity ? Would also appreciate an idea what to buy ( & where ) for the separate remote switches - I can follow your wiring etc but it's what switches/relays to get Many thanks - really impressed with what you have done

that was helpful... thx :)

Helpfull thank you very much

Great tutorial ....Why is this necessary to connect an extra variable trimmer resistor if there is built one ?? Is this possible to connect a limit switch to VFD for example if conveyor is used to stop the motor when has reach the end ??

Nobody wants a wooden lathe that wooden work! Great vid, thanks.

Now that's one thing I ain't got pugged away Cliff, but the thought is there to VFD the mill. I had one those lathes once. Never got to use it though, I still have a faceplate for it, if of any use to you.

Hi Cliff, I am using Vevor VFD on a 5hp table saw. I want to set up remote switch at operators reach. I just don't know what signal to use on the external ports that shows port relay on, relay off and relay on/off. should I use 5v out or 12v out?

Great video, hi, I have a three-phase asynchronous motor, it is a double speed, I would like to know if the 2 kW version of the vfd is fine, using the lower absorption connection (the low speed one). The motor Infos: V: 380 50 hz CV: 1.5 / 2 kW: 1.1 / 1.5 Rpm: 1400 / 2850 A: 3 / 3.6

i love your scottish accent

VFDs don't like dust. Talked to someone who does automation maintenance (VFD expert) and says 2/3 drives die from dust so putting them in an enclosure (or buying an IP66 one) is highly recommended. Though the chinese ones are pretty cheap.

Is it possible to program for BOTH the external and VFD controls to work?

I have the same Box but cant get good torque from it..Do you have any settings recommendations..Thanks

I've got an AT2 single to single phase output to reduce the speed of HVAC indoor fan. The fan wire from the thermostat is 24v. To which port should I connect and is the voltage required to be stopped down?

Hi boss...I have this inverter and I want to know about its settings..which parameters need to adjust as I want to start it by simply its power ON and its slowly slowly increase frequency up to 50hz @2850rpm so input torque(amps) remain low and increase according to frequency increasing....thanks for your reply

Top man!

I really like your video's on the VFD's. I've been able to power my Columbus McKinnon hoist but unfortunately I've not been able to properly wire the handheld controller. This controller has a button for up and another button for down, with a total of 4 wires which includes a ground. I have my 4 wires running from the VFD to the hoist motor and would like to configure the setup so that I don't have to run additional wires between the VFD and the hoist. do you think this will be possible? I can currently operate the hoist thru the VFD from the face panel of the VFD but this is very inconvenient. Motor is 3phase 224v and the power source is 224v 1phase.

Hi cliff Great video If I wanted to use two control boxes with remote switches. One box fixed at headstock One box mobile I can move around the lathe Would the wires from both boxes go to the same terminals in vfd Thanks very much Colm

Well done Cliff. Could you share the setup sheet. I cant find it anywhere online. Nice video

I have the identical VFD. X6 switches fwd/rev, X5 switches fwd/rev AND goes into run mode. The front panel Jog and fwd/rev do not function when P11 is set to 2 (external on/off).

nice....can you do a video on how to use max torque using this VFD?

Thank once again

Does the relay output work? I've set P51 to 20 but the relay doesn't actuate. I'm trying to wire up a start/stop circuit

I have same instruction book different vfd thank you.

Hi cliff I have the same vfd as yours and and I also have a 15v tachometer I want to connect to the vfd I was just wondering what terminals I need use ? Many thanks