Ipad 5th Generation A1822 No Power, Not Charging FIX.

Рет қаралды 21,388

4 жыл бұрын

HOT AIR
Quick 861DW Hot Air Station: www.iparts-4u.co.uk/quick-861...
SOLDERING IRON
Hakko FM203: www.hakko.co.uk/fm-203-solder...
Hakko Micro Pencil : www.hakko.co.uk/fm2028-01-sol...
Hakko Soldering Twezzers : www.hakko.co.uk/fm-2023-mini-...
Hakko Micro Tip T30-I: www.hakko.co.uk/t30-i-conical...
Hakko Micro Tip T30-J Angled: www.hakko.co.uk/t30-j-angled-...
MULTIMETER
Fluke 17B+ Multimeter: www.iparts-4u.co.uk/fluke-17b...
Cheap Multimeter: www.ebay.co.uk/itm/Victor-DIG...
MICROSCOPE
AmScope SM745NTP 7X-45X: www.ebay.co.uk/itm/AmScope-SM...
0.5x Barlow Lens: www.unionrepair.com/0.3x-0.5x...
144 LED Light Ring: www.unionrepair.com/kaisi-k-d...
OTHER TOOLS
DC Power Supply: www.ebay.co.uk/itm/0-30V-0-10...
iPower MAX : www.iparts-4u.co.uk/qianli-ip...
Qianli Stencils Pack: www.iparts-4u.co.uk/qianli-3d...
Qianli Glue Removal Tool 007: www.iparts-4u.co.uk/qianli-si...
Qianli Ic Removal Tool 009: www.iparts-4u.co.uk/qianli-ch...
Website: www.itzone.ie
Facebook: itzone.ie
#datarecovery #microsoldering #boardrepair #mailin #b2brepair

Пікірлер: 13

@kumarbhatia6566 2 жыл бұрын

Great video. Have a deep discharged battery and no boot logo or any graphics. Power cycling @ 70-280mA. Will not cold boot / reset. Will open it up and check for possible bad caps. Thanks for posting!!

@giovaninavarro 3 жыл бұрын

You guys are the best. Unfortunately, I don't have tools like that. But thanks for explaining.

@yuling0513 4 жыл бұрын

fantastic

@bkiserx7 3 жыл бұрын

Nice fix. What was the liquid you were using? And that was a butane torch?

@andrysalmeron5738 Жыл бұрын

Saludos compañero me sirvió muchísimo tu video muchísimas gracias por el aporte

@mrony8632 4 жыл бұрын

Nice

@cynthiahernandez8387 3 жыл бұрын

Great video

@ITZoneireland 3 жыл бұрын

Thanks

@naomitowes5938 3 жыл бұрын

how much will this cost' and were do you t think I can get my iPad charging problem fixed?

@FixTechStuff 3 жыл бұрын

I have an A1822 with a short, draws 830ma. At 5:50 that diode marked "BF" is getting hot. If I remove it, no power. I replaced it, but no change. What am I doing wrong?

@kumarbhatia6566 Жыл бұрын

Perhaps a late comment but this means something after this diode is consuming too much current. With no power, check the resistance to ground at connection after this diode. You may have a shorted capacitor. You can find it with an adjustable power supply set to 1 volt but 3-5A and IPA (alcohol). The IPA will evaporate faster when the injection is done. That is the shorted part.

@FixTechStuff Жыл бұрын

@@kumarbhatia6566 Many thanks. I still have the iPad somewhere, I'll have another go at it. Thanks for the tip.