I’m glad you showed how to compress the spring. Thumbs up
@Manlilow Жыл бұрын
Thanks, for figuring out a way to compress the spring, every other video has you dropping transmission. So much easier your way!, I'm back in operation.
@rogersummy48662 ай бұрын
Had a broken spring and no cap on my elderly friends jd. Wouldn't have been able to install the new spring without your compression trick. Luckily I have small hands, too😊. Fixed it while it was on the ground. Only busted 1 knuckle 😂. Thanks!
@WeekendHobbyMechanic2 ай бұрын
👍
@RodSwansmad8 ай бұрын
That looks like the spring I found on the ground and the cup washer that goes over the top. I could not engage forward gear and seen the spring on the ground. I’m guessing there is a nut over that , I can not find the nut but the cup washer was sitting on the yellow deck with part of the broken spring. I’ll need a nut and a new spring. Thanks for showing this and hope it fixes my problem
@WeekendHobbyMechanic8 ай бұрын
Check out this video. m.kzfaq.info/get/bejne/b9SpZZaIl6y8d2Q.html&pp=ygUhSHlkcm9zdGF0aWMgY29udmVyc2lvbiBqb2huIGRlZXJl
@RodSwansmad7 ай бұрын
@@WeekendHobbyMechanicI had the Spring and cup washer replaced over Xmas but there is a catch , here in Australia they don’t sell the spring and cup washer separately, it’s only sold as the complete pulley system. Hence my pulley system was replaced at $300 for the pulley system plus labour
@sherrycothron906111 ай бұрын
Way to go, great video thank you.
@caseyfirewood8752 Жыл бұрын
I just put new clutch belt on s240 jd rider must be the spring on it now it's hard get my lil hills on my property
@Swinky88 Жыл бұрын
How could you tell it was bad initially? It just looked compressed to me.
@WeekendHobbyMechanic Жыл бұрын
The coils of the spring were collapsed in the middle. I could open the clutch too easily by hand.
@Swinky88 Жыл бұрын
@@WeekendHobbyMechanic Ah okay, perfect! Thank you! Love your videos.
@randyrivera1089 Жыл бұрын
nice i need this....hoping not the transmission
@tehBradz0r Жыл бұрын
Do you have a part number for that spring? Thanks.
@WeekendHobbyMechanic Жыл бұрын
All I have is a part number for the clutch, spring and belt: MIA12482 Do a Search on amazon for : General Transmissions Secondary Pulley RT400 GT79244 - MIA12482.
@melmel2644 Жыл бұрын
My D105 selector switch is tough to get into reverse, but it will go in reverse and move but the selector switch will not go into forward and it does not move forward. What should I look at first? Thanks.
@WeekendHobbyMechanic Жыл бұрын
Clean the top of the transmission completely.
@mikeperry65282 ай бұрын
And I thought being fat was my problem. Maybe 70%. Need to replace mine.
@rustychevy1213Ай бұрын
Same here I got a 13% grade that gets cut and it didn't not like it
@webtechaz20 күн бұрын
how can you tell if the spring is bad?
@WeekendHobbyMechanic20 күн бұрын
If the coils are collapsed.
@wesleywhalen2132 Жыл бұрын
were you able to find just the spring? All I have found is the whole kit with the pulley. Do you have a link?
@WeekendHobbyMechanic Жыл бұрын
I couldn’t find just the spring.
@FastandFoody Жыл бұрын
Is there an adjustment on the drive belt pulley bracket? Since i have replaced my john deer 125 with a new drive belt and pulleys the mower has no power Anymore i replaced with all oem parts from the dealership and double checked with them all parts fit… and still no power on the mower it is a automatic with a tuff torq t40
@WeekendHobbyMechanic Жыл бұрын
D100 & D105 have a plastic case transmission. Different then your. D125 or LA125 have a Hydrostatic trans. Did it move before you change the belt?
@FastandFoody Жыл бұрын
@@WeekendHobbyMechanic yes it seemed to have ran fine before i changed the belt other then the old belt slipping off occasionally. Now since i changed it i can barely make it up a incline.
@WeekendHobbyMechanic Жыл бұрын
@@FastandFoody Check for tension on the belt went the E-Brake is off. Check to make sure the Neutral Rod is all the way in. Watch this video to make sure the belt was replaced correctly. kzfaq.info/get/bejne/gsqVh8ueyNGumGQ.html
@FastandFoody Жыл бұрын
@@WeekendHobbyMechanic thank you i actually ended up using a 1 inch smaller belt thats the same width that john deere makes for a similar mower. Now it has full power again so it wasnt the transmission most likely although it could have been. I watched your videos on the drive belt thats how i originally changed the belt so thank you for helping me and making great videos.
@WeekendHobbyMechanic Жыл бұрын
@@FastandFoody Awesome...
@51hawkrm2 ай бұрын
Do you have the part number on the spring
@WeekendHobbyMechanic2 ай бұрын
John Deere only has the part number for the clutch, belt and the spring MIA12482. Very cheap on Amazon.
@harleyholic75272 ай бұрын
Is it normal for this model to be really slow?
@WeekendHobbyMechanic2 ай бұрын
Nope. Your spring is probably getting weak. Have a look at it.
@diybasics627010 ай бұрын
Is this the same issue for slow moving mower.
@WeekendHobbyMechanic10 ай бұрын
Check your spring. Make sure it’s in perfect shape.
@Redpilldata Жыл бұрын
this the pulley im looking for? i just see that spring
@WeekendHobbyMechanic Жыл бұрын
They sell the spring and clutch as a kit.
@wmkess5 ай бұрын
How many hours did that mower have on it?
@WeekendHobbyMechanic5 ай бұрын
Just over 100…
@yourneighborhood Жыл бұрын
Didn't work for me. And it was a pain in the ass to change. Make sure yiu have all the tools and equipment.
@WeekendHobbyMechanic Жыл бұрын
Maybe you have more then one problem with your trans…
@yourneighborhood Жыл бұрын
@@WeekendHobbyMechanic yeah I was thinking that or maybe just my drive belt needs replacement. I'll try to come back and post whatever the outcome was once I get it fixed.