Knife Sharpening - Sharpworx Utility Sharpener

Рет қаралды 627

2 ай бұрын

sharpworx.net/
Sharpworx sent this to me for review, so full disclosure. I stated this in the video as well. I am not getting any monetary reimbursement for my video; it is truly my own opinion. Although, I see a few faults in the device, it is a very effective tool. I would indeed, recommend it for someone, who does not know how to freehand sharpen. It would be a useful aid, or for a home cook, means to keep their knives, in top cutting performance.

Пікірлер: 33

@barkingspider2007 2 ай бұрын

Hard Pass... I have been working on my freehand sharpening and making good progress. Ultimately, you have to be willing to go through the learning curve. Thanks for the video! I enjoy your sharpening content. 😎👍

@Jef 2 ай бұрын

I started on a fixed angle system. They have their place. Of course, they also have learning curves as well. Not for everyone, but i see a place for it.

@marcleblanc1994 2 ай бұрын

Interesting concept !! Thank you for sharing

@Jef 2 ай бұрын

Thanks for checking it out

@gregmccormack5709 2 ай бұрын

Interesting review with surprisingly amazing results. I can't wait for the next video.

@Jef 2 ай бұрын

Thanks. I think the other system will probably be much better. Will try to get it sorted out this coming weekend

@alanshaw6161 2 ай бұрын

good deal Jeff. thanks for the demo. that will work for my mom who lives to far away for me to sharpen her kitchen knives.

@Jef 2 ай бұрын

There maybe other options that are easier to use but i think it is easy enough to figure out

@alanshaw6161 2 ай бұрын

@@Jef was also thinking about the Chosera knife clip that goes on spine of a knife and a good stone or two. any suggestion appreciated too.

@Jef 2 ай бұрын

That is very easy to use. The only issue is theres just the angle of the clip. If the knife is more obtuse you gotta reprofile which can take a lot of grinding. I did two videos on that thing. One of my kost viewed actually

@jamesmiller360 2 ай бұрын

Enjoyed the video. For me I think the stone movement would be distracting. Thanks for posting.

@Jef 2 ай бұрын

Yea that’s annoying for sure. Tape would work I’m sure. Less pressure and having the diamonds broke in wouldn’t hurt either. They are super aggressive

@Ohyet0210 4 күн бұрын

I believe there is a rubber holder for that diamond plate. You can ask them.

@Jef 4 күн бұрын

Right on. Do you know if they are being included with the devices, or, does everyone have to request it?

@mtu-engineer3220 2 ай бұрын

They saw you coming when you bought that. It probably works mediocre for sharpening hand planes and wood chisels. You could use it for reprofiling blades, then switch to freehand.

@joker660video3 2 ай бұрын

Kool video Jef nice knife

@Jef 2 ай бұрын

Thanks 🙏

@JohnDoe-zb7dz 2 ай бұрын

Should have convinced him to give you the pro model which is way better. Same thing happened to Jerad Neeves. Received the bare basic model. Mine will accept all 6x, 8x, and 10x stones, snugly. I also have the dual clamp plus the magnetic base. For some reason he dumped the dual clamp, which to me is the greater asset. The guy has a good product but he's not the communicating type. Support for parts doesn't look promising for my model. I do recommend the pro, but apparently it's not available anymore. Thanks for sharing Jef.

@Jef 2 ай бұрын

I got the one with just magnets. Purchased on my own. Will be getting into it soon

@JohnDoe-zb7dz 2 ай бұрын

@@Jef This is great. I will watch for sure. I just wish he had the dual clamp for you to try. I'm going to inquire.

@Jef 2 ай бұрын

Wonder id it can be purchased as an add on. If he even carries them still

@SouthernKnifeLife 2 ай бұрын

Man that would take some getting used to, prolly better just to use some of those blue plastic guides

@Jef 2 ай бұрын

It's easier than it looks. Since the plates are brand new, there is alot of friction, causing it to bounce around. Also, you can do sections. I was trying to create a continuous, non stop, flow. Which, if the plates were a little more broken it, would have went easier. You are correct; those little plastic guides, are less hassle :) All boils down to what you wanna try for yourself

@SouthernKnifeLife 2 ай бұрын

@@Jef I shot you an email brother, I know you busy but just a heads up

@knifesharpeningnorway 2 ай бұрын

Have you tried your pdt plates anymore? Mine got much faster after using some 3m wet n dry sand paper on em. Also both of mine where dead flat

@Jef 2 ай бұрын

I let a few other folks try it out. Most seemed to really enjoy it.

@knifesharpeningnorway 2 ай бұрын

@@Jef you should try the 3m wet n dry it became pretty faster after that in my eyes. But everyone likes different stuff most important thing is that the knives get sharp

@Jef 2 ай бұрын

3m Sandpaper? That seems like it would glaze the surface. If loose sic doesnt rough it up i would be very surprised if sandpaper did.

@knifesharpeningnorway 2 ай бұрын

@@Jef it worked extremely well for me and another one here in norway that has en. Just used it with water i think it was 400 grit i used cant fully remember

@Jef 2 ай бұрын

Nice. I got some 3m here. Soon as i get the plate back I’ll give it a shot

@CNYKnifeNut 2 ай бұрын

Im failing to see how that makes it any easier, _especially_ for someone starting from zero. People are always looking for ways to make simple processes as complicated as possible.

@Jef 2 ай бұрын

One of the hardest things for people to do, starting out, is holding an angle. This does it for you. Not a home run for everyone 🤷‍♂️