Knife Sharpening - Strider SNG

  Рет қаралды 337

Jef Jewell

Jef Jewell

28 күн бұрын

Knife used - Strider Sng
Steel type - m390
Stones used -
Gritomatic sic - 240 grit
Gritomatic sic - 1000 grit
Gritomatic sic - 2500 grit
Suehiro G-8 - 8000 grit

Пікірлер: 36
@CNYKnifeNut
@CNYKnifeNut 26 күн бұрын
Having 2 giant choils, but still not getting the plunge grind right is always hilarious to me.
@Jef
@Jef 26 күн бұрын
Riight? How does that even happen? It would be one thing if these knives weren't that expensive.
@EDCandLace
@EDCandLace 26 күн бұрын
That tickled me hard!
@dombond6515
@dombond6515 24 күн бұрын
This is why you are the MAN!!!
@Jef
@Jef 23 күн бұрын
👊
@familyphotoshoot2413
@familyphotoshoot2413 26 күн бұрын
That rounded tip is a pretty common thing from the Strider factory. The last SNG I got directly from them had it as well.
@Jef
@Jef 26 күн бұрын
I can see it being a bit annoying, but the tanto, fake out grind, is what would upset me. It's like the belly was just placed flat against the grinder. You can really see it in the opening shots.
@glockgaston2922
@glockgaston2922 24 күн бұрын
Jef really good video. Most knife companies seem not to be able to get the sharpening choil right for whatever reason and it’s definitely annoying. I really appreciate all the time and effort you put into making these videos brother and I hope you and your family are doing well 👊🏼
@Jef
@Jef 24 күн бұрын
Thanks for checking it out 🙏 Yea I’ve just about given up on knives makers getting the choil correct, but i gotta call em out on it. If enough customers realize there is an issue, and voice concern, maybe someone, somewhere, will listen 😁
@EDCandLace
@EDCandLace 26 күн бұрын
Striders are always bucket loads of fun to correct lol! I've seen very few come from the factory with a decently done edge.
@Jef
@Jef 26 күн бұрын
Yea that seems to be the consensus. Everyone knew but me 😂
@josephling288
@josephling288 26 күн бұрын
Fantastic. Thanks again Jef!
@Jef
@Jef 26 күн бұрын
Any time ;)
@Ro_9
@Ro_9 26 күн бұрын
Thanks for the videos, tips etc. Merci
@Jef
@Jef 25 күн бұрын
Thanks for watching 🙏
@daw764
@daw764 26 күн бұрын
Your freehand technique is top notch!!
@Jef
@Jef 26 күн бұрын
Thank you 🙏 I make mistakes all the time, but like guitar playing, if you play through, they tend to be unnoticed :D
@jamesmiller360
@jamesmiller360 26 күн бұрын
Nicely done. Enjoyed the video.
@Jef
@Jef 26 күн бұрын
As always, I truly appreciate ya watching, and commenting :D
@Agent_Orange_Peel
@Agent_Orange_Peel 26 күн бұрын
I have five Striders. Four of them had exact grinds like that. The fifth one probably would have looked like that too but it’s the .75 AR. Once the edges are cleaned up, they are great. Plus I don’t mind since I hand sharpen anyways.
@Jef
@Jef 26 күн бұрын
Right on. I guess it’s just the way they do things if you have that many examples.
@Agent_Orange_Peel
@Agent_Orange_Peel 26 күн бұрын
@@Jef Ya… I really don’t get it either for that price point. I think it was Apostle P that said, Strider guys are like Jeep guys. Like, we know they aren’t the “best.” Sure, they could be considered overpriced. But hey, we like them. Though I will say with the ever increasing price, I have not bought any new pieces in a while. They were expensive back when they were cheaper.
@Jef
@Jef 26 күн бұрын
lol Rob nailed it. I’m with ya one the purchase halt. I have only grabbed a handful of knives, in the last 3-4 years. China quality, hasn’t changed any U.S. manufacturing habits, so i doubt anything will. Even some of thier knives, are starting at an absurd amount.
@jeffhicks8428
@jeffhicks8428 20 күн бұрын
nice video Jef. How would you say that 240 compares to the 320 sp. I've still never tried the gritomatics but that thing honestly looks like it could be finer than the shapton from the videos.
@Jef
@Jef 19 күн бұрын
Its faster than shapton 320. I would put it up against the sp 120. I had a burr on some of this edge after the first few strokes.
@blistersteel
@blistersteel 26 күн бұрын
G8 is nice.
@Jef
@Jef 26 күн бұрын
Oh yea :) I forgot how much I liked it
@stevenlachance8576
@stevenlachance8576 26 күн бұрын
Glad I never got the strider bug. The double choir makes no sense to me. What steel is this knife?
@Jef
@Jef 26 күн бұрын
Should be on the video description but i forgot to mention it while recording. It’s just 20cv
@knifesharpeningnorway
@knifesharpeningnorway 26 күн бұрын
That looks badly grinded to put it mild. Good sharpening as always mate.
@Jef
@Jef 25 күн бұрын
Thanks bro. Hope you’re good, and life is going your way 🤙
@knifesharpeningnorway
@knifesharpeningnorway 25 күн бұрын
@@Jef enjoying summer here 🙂
@blistersteel
@blistersteel 26 күн бұрын
They are too chunky for me.
@Jef
@Jef 26 күн бұрын
The behind the edge thickness was surprisingly good. However, that stock, is a thick one.
@Sophocles13
@Sophocles13 19 күн бұрын
I can't stand a crappy blade to handle ratio.
@Jef
@Jef 19 күн бұрын
I’ve held a few knives that it didn’t bother me so much. Still, i agree. Make use of the real estate available
Knife Sharpening - SharpWorx Master 2 Knife Sharpener
12:49
Jef Jewell
Рет қаралды 1,1 М.
TRY NOT TO LAUGH 😂
00:56
Feinxy
Рет қаралды 7 МЛН
Заметили?
00:11
Double Bubble
Рет қаралды 3,5 МЛН
1❤️#thankyou #shorts
00:21
あみか部
Рет қаралды 58 МЛН
Knife Sharpening - Kershaw Bel Air Magnacut
17:15
Jef Jewell
Рет қаралды 1 М.
Quicklook - Benchmade Gold Class 945-221 Mini Osborne
4:56
Jef Jewell
Рет қаралды 4,2 М.
Knife Sharpening - Spyderco Para 3
21:53
Jef Jewell
Рет қаралды 3,3 М.
Knife Sharpening - Protech Strider PT - 154CM
11:01
Jef Jewell
Рет қаралды 1,2 М.
Knife Sharpening - SPK Shark - Cpm-4v
18:08
Jef Jewell
Рет қаралды 27 М.
Knife Sharpening - Zdp 189 and Magnacut on Suehiro Debado
26:25
Knife Sharpening - Sharpworx Utility Sharpener
20:58
Jef Jewell
Рет қаралды 574
ช่วยหนูด้วย
0:15
Jenny Mintra
Рет қаралды 7 МЛН
ШАШЛЫК ВСЕМУ ГОЛОВА
0:16
KINO KAIF
Рет қаралды 3,3 МЛН
Он не УМЕЛ плавать!😩
1:00
Petr Savkin
Рет қаралды 4,3 МЛН