Make Hangers and Drill Angled Holes

Рет қаралды 55,945

6 жыл бұрын

Drilling angled holes can be a challenge and a half, and it's compounded by drilling into round stock. Follow along as I solve this issue, without fancy tools (beyond a drill press), and build some nice wall mounted hangers in the process.
Follow and like Switch & Lever on:
Facebook: / switchandlever
Instagram: / switchandlever
Twitter: / switchandlever
Pinterest: / switchandlever
Linkedin: www.linkedin.com/profile/view?...
And check out the Switch & Lever online store at:
www.switchandlever.com/store/
---------------------------
Music:
Nicolai Heidlas - Spreading Positivity
Nicolai Heidlas - Flaming Energy
CC BY 4.0
hooksounds.com

Пікірлер: 57

@RRINTHESHOP 6 жыл бұрын

Nice simple design and good technique. Thank you for sharing.

@TomZelickman 6 жыл бұрын

Nicely done, Daniel! Really enjoyed the build and your sense of humor along the way. Best wishes! - Tom Z

@mihumus 6 жыл бұрын

Nice jig and project, great work!

@ovidiub13 6 жыл бұрын

When using a wholesaw, after marking the outer circle, use a regular drill bit and drill a hole on the circle line (inside the waste) so the sawdust has a place to escape. This way you won't dull your wholesaw, drill faster and avoid burning the wood. 👍

@SwitchAndLever 6 жыл бұрын

Great tip!

@pjhalchemy 6 жыл бұрын

Thanks for another excellent video. Really appreciate your editing and all aspects of the videography. Simple elegant jig and fine build...gonna build that knife one day soon. Hat Tip!

@FredMcIntyre 6 жыл бұрын

Nicely done! 👍👊

@reforzar 6 жыл бұрын

Nicely done good sir.

@tomsdreamshopworx 6 жыл бұрын

Not sure which I enjoy more, your projects or your narration. Please keep on doing both!

@SwitchAndLever 6 жыл бұрын

Don't worry, I will. Some videos will be lighter on narration though, as they're much more fun to actually edit, and you can be more creative with matching to music etc.

@MikeTheMaker1 6 жыл бұрын

Tom's Dreamshop Worx facts. I like the narration, keep it going

@VintageWoodWorkshop 6 жыл бұрын

Great idea!

@jparky1972 6 жыл бұрын

Lol. Love your sense of humour. And.. I learnt something too. Thank you.

@SwitchAndLever 6 жыл бұрын

Cheers!

@timberdish 6 жыл бұрын

Great vid with some really good tips, along with an excellent jig. Can't go wrong with a S&L vid :-)

@MikeTheMaker1 6 жыл бұрын

A clever little jig. Customizable to and size pole. Awesome idea boss

@SwitchAndLever 6 жыл бұрын

Cheers!

@Elektronaut 6 жыл бұрын

The drill jig is great. I recently made a rack for all my small power tools to hang and drilling the angled holes was no fun. The hangers really cool as well I especially like the carved ends. This gives it personality! PS: Don't let them catch you ;-)

@MarcelDiane 6 жыл бұрын

Turned out well, smart idea making that slit cut.

@SwitchAndLever 6 жыл бұрын

Cheers!

@MikeTheMaker1 6 жыл бұрын

Marcel's Workshop that slit made the jig

@cwadub 6 жыл бұрын

Great jig!

@Cactusworkshopchannel 6 жыл бұрын

great job! the slot was clever!

@SwitchAndLever 6 жыл бұрын

Cheers!

@createdbycay8704 6 жыл бұрын

Nicely explained. - Cay

@BeInspiredwithDominic 6 жыл бұрын

For some reason, they remind me of bacteria... Which makes them art! Cool jig, and good idea with the slot. Thanks for sharing!

@online12plus 4 жыл бұрын

Nice one Mr.Switch

@online12plus 4 жыл бұрын

and Lever*

@mrthomaslaux1 6 жыл бұрын

Very nice

@not2fast4u2c 6 жыл бұрын

Pure Genius.!!!..Where did you get that Nice little carving knife ?

@SwitchAndLever 6 жыл бұрын

I made it, check a video I released about a month ago :)

@GeneralBoboDK 6 жыл бұрын

You should create videos more often! :D Maybe include some 3d printing, in future projects?

@SwitchAndLever 6 жыл бұрын

I'm trying to release a video every two weeks, it's not going to get any more frequent than that, it takes a long time to produce a video, amongst doing other things as well. 3D printing is not really my thing, but there will be done in my next video, in two weeks :)

@JBantha 4 жыл бұрын

Time to adapt this without a drill press or a band saw or a circular sander. Cool project ;)

@SwitchAndLever 4 жыл бұрын

Can I just say a heartfelt thank you! I get so many complaints about people not able to do anything because they don't have all the tools in the video, so it's very refreshing that someone actually gets the idea of something without getting stuck on excuses.

@rjbennington8468 6 жыл бұрын

Cat-Hair Knife makes a couple of cameos in this film. I suspect that Cat-Hair Knife will go onto being a Star someday.

@SwitchAndLever 6 жыл бұрын

Only to fall into a bad crowd and be implicated in a celebrity stabbing.

@Temuba 6 жыл бұрын

I was going to ask about the knife, especially with the Japanese writing on the blade. Too bad I can't make that, don't have a cat. Have a dog though.

@SwitchAndLever 6 жыл бұрын

Japanese writing? It's not even close, it says "Morakniv", which is the brand of the knife blade.

@philsketball Жыл бұрын

What angle?

@pcrombs 3 жыл бұрын

What would you call that metal mounting bracket?

@SwitchAndLever 3 жыл бұрын

No clue, they should be available in just about every hardware store. Keyhole bracket maybe? No clue.

@eklofbjorn 6 жыл бұрын

"that worked better than I thought it wood"

@felixdietzCGN 6 жыл бұрын

Very nice, organic hangers :) is this your own shop or are you still at your university? Anyhow, lucky you, awesome Sanders :D

@SwitchAndLever 6 жыл бұрын

Long story but it was at a place I was working. Currently I'm in between shops but I shot a lot of material before I left so I have plenty more videos to release :)

@MikeTheMaker1 6 жыл бұрын

Felix Dietz I like it. Organic is the best word for this project

@edmundschwartzadder5360 6 жыл бұрын

How durable is the jig?

@SwitchAndLever 6 жыл бұрын

I drilled maybe 30 holes total with it, and it barely showed any sign of wear. If you're worried about it lasting, make it from hardwood. Or just while you're making the first one make a few at the same time, as it should take marginally longer to make three at the same time, as opposed to one.

@LukeLibertyNoRulers 6 жыл бұрын

An easier way to drill those holes is by starting with the drill bit straight onto the surface. Start your hole then turn the work piece or drill, with the drill still running, to the angle you want and continue the hole. This is easier to do if you start with a pilot hole.

@SwitchAndLever 6 жыл бұрын

On a round surface it's quite difficult though, and you're less likely to get the same angle every time, and will likely get more tearout around the holes.

@Figulus 6 жыл бұрын

Sorry?! What's this about streaking? I don't use social media nor do I Live in Stockholm (I think that's where you said that's where you lived in the Widowmaker video but I can't quite remember...) so could somebody give me a run down of what's been happening over there?

@SwitchAndLever 6 жыл бұрын

Look at the clothes I'm hanging at the end of the video and think what I have left on.

@Figulus 6 жыл бұрын

Ohhh. Haha.

@lostinthekerf 6 жыл бұрын

Very elegant solution. Ikea called -- they want 200,000 by December. They will be called Hangel : ) What would you do if you got an order for a huge amount of something you made?

@SwitchAndLever 6 жыл бұрын

According to the IKEA naming convention, as this would probably fall under the category hall furniture, it would probably be named Levanger or something like that, as they're named after Norwegian place names. IKEA produces all their own stuff, so at best they'd license the design, but more likely design something similar and own the design fully instead. If I got a huge order from somewhere else I'd find a place to produce it for me, I don't have the shop, man power, or time to create large volumes of anything :)

@andreibogorodski3979 4 жыл бұрын

You know its really a shame you are using such advanced machinery for this piece of work, most of us dont have access to this and as such, this guide is very much useless. i mean, who is this video made for? professionals with a 50k $ workshops?

@SwitchAndLever 4 жыл бұрын

Advanced machinery? I'm using a disc sander, a band saw and a drill press, those are very much not advanced machinery and none of them can't be replaced with hand tools. Use a sanding block, a hand saw and a cordless drill. Further, please watch this: kzfaq.info/get/bejne/nMhgpLiWucyVd30.html