Рет қаралды 69,215
Build a post and beam greenhouse. Pour a concrete foundation for a post and beam cedar and fir greenhouse. Excavate a site in the garden, add perforated drainage pipe, pack crushed gravel and set wood concrete forms in place. In this the first part of the post and beam greenhouse build I will cover step-by-step what I did to make a long lasting reinforced concrete foundation to set my posts and walls on. I build the forms from standard framing lumber and staked them in place. The forms contain rebar that's hung from tying wire and there's also wall anchor bolts suspended in place. The corners of the concrete foundation have galvanized post saddles set in place during the concrete pour. This post & beam greenhouse foundation is easy to make and will last for decades and acts as a sturdy structure for the rest of the build. I added crushed stone to make the floor for the greenhouse once the forms were stripped. In further videos in this series I will detail all the post and beam cutting and notching and fitting. Then I will make the cedar rafters for the roof and add the polycarbonate glazing and vents.
I have a 14 page greenhouse plan that's available at the link below.
GREENHOUSE PLAN: manabouttools.com/greenhouse-...
HARDWARE LIST and BLOG POST: manabouttools.com/greenhouse/
POLYCARBONATE PANELS: amzn.to/3L6U5Hc
SUBSCRIBE: kzfaq.info...
TOOLS I USE: manabouttools.com/tools-i-use/
CONCRETE CALCULATOR: www.inchcalculator.com/concre...
FOLLOW ME:
Instagram: / manabouttools
Twitter: / manabouttools
Facebook: / manabouttools
Website: MANaboutTOOLS.com
Patreon: / manabouttools
DISCLAIMERS:
Some of these links have an affiliate code, if you purchase tools with these links I will receive a small commission at no additional cost to you. Thank you! The tools or equipment seen in this video and have been purchased ourselves.
#greenhouse #concrete #greenhouseplans