Miele Complete C2 PowerLine - Cord Reel & Motor Repair/How To!

No video

Miele Complete C2 PowerLine - Cord Reel & Motor Repair/How To!

Рет қаралды 24,262

Beko1987

Күн бұрын

This belongs to a cleaner. This machine is used HARD! It also needs some repair so let's have a look and see if we can revive this poor miele that just wants to die...
Fancy donating to the channel? I’m always in need of parts for projects, so have a look at my Amazon wishlist, and let me know who you are in the note so I can read it out on camera! - www.amazon.co.uk/hz/wishlist/...
Please check out my Instagram - @TheRealBeko1987
Please check out my blog of Vacuum Cleaner brochures and Manuals - oldhoovers.blogspot.com/
Please do like this video if you liked it, or dislike if you felt it was lacking a certain something, and please subscribe if you would like to be notified when I upload more vacuum cleaner content!

Пікірлер: 34

@wg8106 11 ай бұрын

We watched your video over and over until we got it just right. So happy when it suddenly all fell into place. Thank you so much. 😀

@beko1987 11 ай бұрын

Awesome, glad it helped! That's 60% of the battle with them, lining everything up just so so it call clips into place!

@CerberaSagaris 2 ай бұрын

Thanks mate, kind regards from the Netherlands!

@mcgrathken 2 жыл бұрын

Thanks Sam. I love when you messed up on the springs and didnt edit it out. This happened me and was a nightmare to fix. I eventually fixed my cable reel and cleaned it up. its good for another few years hopefully. Keep up the good videos mate👍

@lhave_ 2 жыл бұрын

Thanks mate! Saved me £100 on a new cord reel. I did struggle a bit to take the reel/spring assembly apart (and no footage on your video), but managed it in the end. My issue was the exact same as the one on your specimen - cheers.

@gemmagray9160 3 жыл бұрын

"Not today little buddy!" Haha :D Wish I could do repairs like this.

@TommyCullen-VacuumConnisour Жыл бұрын

I feel happy for that vacuum, honestly though you must make peoples days.

@vacuum_collector26 3 жыл бұрын

Can't believe I missed this when it was uploaded oh well here now🤣

@KirbyEnthusiast 3 жыл бұрын

Great video Sam really enjoyed this one . 👌👌

@MrBlackkn 2 жыл бұрын

Thank you. You saved lots of money 🙏🙏

@johnhigginbotham8291 3 жыл бұрын

Another great video!

@mahmutozciris2308 2 жыл бұрын

Thanks Sam. You are great.

@gregbouchard1563 3 жыл бұрын

Keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate keep up the good work on here mate

@Ivftinianvs 4 ай бұрын

I found it easier to assemble the reel and wind the cord onto it before attaching the spring and inserting it back in the assembly.

@ad6073 Жыл бұрын

I have this S300 Miele Vacuum Cleaner, the spring has come out of the catch for the accesories door, can you tell me how it fits back in please. It is this one. Thanks for the helpful videos

@HB204 3 жыл бұрын

Probably one of my favourite style Miele vacuums. Is this the same cleaner that knackered them 2 black S5210’s that was on your channel a while back?

@percygomez1879 Жыл бұрын

Thanks. Do you know how to test the motor? I see 4 contacts but i do not know how to check for either continuity or to power it. Thanks

@HemaFTW Ай бұрын

In the newer model there are screws underneath the power and cors buttons... No idea how to remove those

@Bgmm7yrs 3 жыл бұрын

@beko1987 My vacuum cleaner cable automatically gone inside without clicking button . Can you tell me what happened with it ?

@jerybelandres7502 3 жыл бұрын

Sir my Stanley vaccum cleaner if i turn to switch on its working but my problem is have a bad smell like burn smell can u help me sir

@formulavon Жыл бұрын

Great videos! When you are faced with a blackened commutator like in this video do you clean it up at all like sand the carbon off of it? I'm faced with a similar one on my very dusty and very dirty 12 year old Cat & Dog 2200W. I'm giving it a good clean, re-greasing the bearings and wondering whether to do anything to the commutator before putting it back together. It was still working before disassembly but had a strong burning smell. Thanks

@beko1987 Жыл бұрын

0000 wire wool then make sure there's no shards around works well I find! You don't want to take any material off, just buff the carbon deposits off!

@formulavon Жыл бұрын

Thanks for the advice!

@Rx7_karl 3 жыл бұрын

Cool

@jeremymarshall7381 3 жыл бұрын

Did you can make Video from are vorwerk vk 119 with the et 31 but look in the Internet from this vacuum Cleaner

@mick7739 2 жыл бұрын

i cant see the wheel focus your camera ?

@markreeves6616 3 жыл бұрын

Hi Mr Beko1987, can you please get yourself a new rug to work on, as the current one is really off-putting. Regards Mark Vacman Reeves

@beko1987 3 жыл бұрын

Hi! Already done! See the back mat video. That's been changed since then too! But don't worry, ye olde rug hasn't gone far, got one more job for it! (it is in the garden atm though)

@mick7739 2 жыл бұрын

good vid but you keep lifting bitts up out of the camera ???

@Crimsontears95 2 жыл бұрын

For the life of me I can not open the fan it's screwed so tight

@beko1987 2 жыл бұрын

They can be sometimes. I get the impact driver out if it's too bad. Doesn't help that the fan has to come off to do anything, unlike other motors where you can take the back off and hold the armature to undo the fan nut

@Crimsontears95 2 жыл бұрын

@Beko1987 I have an impact driver and even that is struggling I'm using cloth to hold the fan but I can't hold it tight enough for the drill to work and not just spin

@beko1987 2 жыл бұрын

You spinning it anti clockwise? It's a reverse thread. Might help, if not then it's a massive pain when they seize. Zero places to grip anything as you'll bend the fan easily. Cloth over the fan is a must too, had many deep horrible cuts from that

@Crimsontears95 2 жыл бұрын

@Beko1987 I am spinning it anti clockwise should I spin it clock wise ?