Modeling in Maya - How to Model Tires
Рет қаралды 51,867
Күн бұрынAfter watching this tutorial, you will know how to model a tire in Maya. I’ve been modeling vehicles for over the past 10 years and in this video you will learn my favorite way to model a tire. We will cover the best way to use reference, how to use radial symmetry with Duplicate Special and instancing, and how to model detailed tread using quad draw. At the end, I will also show a easy way to model lug nuts and valve stems, so make sure to stick around for that. Enjoy!
Model available for download on Artstation here: www.artstation.com/a/5574454
Professional Website: onmars3d.com/
Gumroad: gumroad.com/onmars3d
Artstation: www.artstation.com/onmars3d
Instagram: / onmars3d
Software used in Tutorial:
Maya 2020
Pure Ref
---------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------
Table of Contents
0:00 Introduction
0:27 Using Reference to Build Base Tire
5:20 Refine Base of the Tire
9:28 Building the Tire Tread with Quad Draw
13:50 Using Duplicate Special to Refine the Tread
19:15 Refine Tread and Tire
32:35 How to Model Lug Nuts
41:14 Conclusion
---------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------
@toddlawrimore3577 2 ай бұрын
Great to see how other people use the tools. You've shown a couple of techniques that will improve my skill set. Thanks.
@ramka-q5m 2 жыл бұрын
Man, you are the best of the best, you helped me incredibly, not only in creating a car, but in general understanding how to create any mesh. Thank you so much !!!
@kevinwamuge1757 Жыл бұрын
I discovered this channel yesterday and am like why didn't I discover it way back when i was just beginning 3D modelling. Very Educative thanks.
@lukasallenbaugh4728 Жыл бұрын
Thank you! Amazingly simpler version of making a tire tread, I love the quad draw process especially!
@OnMars3D Жыл бұрын
Glad it was helpful!
@dhanshekhar7848 3 жыл бұрын
Thanks for the tutorial man, I have never seen yet this type of clean topology tutorial.
@OnMars3D 3 жыл бұрын
Glad it was helpful!
@jerodvel 3 жыл бұрын
Your tutorials are amazing and sharing your workflow is so cool man.
@OnMars3D 3 жыл бұрын
Thank you, glad you found them helpful!
@vikrantsingh7636 3 жыл бұрын
man I can't thank you enough for this awesome tutorial. You are the best !!!
@OnMars3D 3 жыл бұрын
Thank you, glad this helped!
@mzh99 6 ай бұрын
Very nice version of a tire tread. Well explained and smartly produced.
@butsuyopin9841 Жыл бұрын
from Japan. You are awesome. Very informative video. I can't believe this is free!
@simachoudhary7154 2 жыл бұрын
Thank you. As a beginner finally found something awesome and simply simple tutorial about maya as and learnt a lot.
@OnMars3D 2 жыл бұрын
Glad to hear that, always happy to help!
@3Dobjects 2 жыл бұрын
That's awesome!
@jashanhayer1046 2 жыл бұрын
you saved my so much of time. Thanks a lot.
@OnMars3D 2 жыл бұрын
Glad it helped!
@merwinatticus 3 жыл бұрын
very cool
@djkato 2 жыл бұрын
The instance trick Really is genius, thank you!
@OnMars3D 2 жыл бұрын
Glad you found it helpful!
@marcelodeniz3932 3 жыл бұрын
awesome!
@RajnishKumar-co4vl 2 жыл бұрын
wonderful Sir
@samirkumarswami Жыл бұрын
thanks a lot!
@VasudevaStudios 11 ай бұрын
thank you
@annakowell7854 3 жыл бұрын
Looks stunning!
@OnMars3D 3 жыл бұрын
Thank you!
@annakowell7854 3 жыл бұрын
@@OnMars3D Ever thought about adding some interactivity? It might be a nice user-driven rendering.
@liamheffernan2006 2 жыл бұрын
Just finished my wheel and it looks great! Would love some more vehicle related videos. Also you should do a reaction video to the new Gran Turismo trailer that just dropped :D
@OnMars3D 2 жыл бұрын
Can't wait for Gran Turismo 6 and Forza Motorsport games to come out!
@shivateja544 3 жыл бұрын
Thanks for sharing
@OnMars3D 3 жыл бұрын
No problem, thanks for watching!
@blakejohnson4834 3 жыл бұрын
This video was awesome. You make the best videos. Maybe you could tackle modelling a complex gun? maybe a scifi one. Thanks and all the best.
@OnMars3D 3 жыл бұрын
Thank you, I plan to more prop modeling soon! Thanks for the suggestion
@Designerkhi 2 жыл бұрын
I really appreciate the tutorial! I was able to follow every step even tho I work in Blender. But as you say the techniques described in your videos can apply to any software.
@OnMars3D 2 жыл бұрын
Glad it helped!
@salemmelas4515 2 жыл бұрын
What tools you used to get similar result in blender ?
@Designerkhi 2 жыл бұрын
@@salemmelas4515 I changed the transform snapping(the magnet icon at the top of the UI and a menu should drop down when you click.) to "face". This allows you to model the tire tread while conforming to the base cylinder. After modeling the tire tread I created an array modifier with 72 instances controlled by an empty and rotated that empty 5 degrees. Also don't forget to apply the scale and make sure the origin of the tire tread is the same as the 3D cursor. This so you won't get any issues when using the array modifier. Lastly, I cleaned up the geometry by adjusting, moving vertices along the normal, and merging vertices that needed to be merged. Hope this helps and let me know if you need a little more clarification.
@salemmelas4515 2 жыл бұрын
@@Designerkhi thank you a lot i really appreciate your explanation, ill try to follow it along.
@icefish17 2 жыл бұрын
For the multi-cut tool you can also press Alt-Shift-X.
@OnMars3D 2 жыл бұрын
Is that a default HotKey for Multi-Cut, because it doesn't work when I try it in Maya 2020.
@artbybruno1734 2 жыл бұрын
Great Video! Hands down, the best way of modeling tires I have seen! Will apply this technique on future projects for sure! Thanks for sharing this! Just one question (you lost me on the math part :) ) "360 / 72" - where is that 72 coming from? Thanks!
@OnMars3D 2 жыл бұрын
Happy to help! The 72 degrees is coming from 360/5 since there is 5 repeatable rim stems for this wheel.
@johnnyrodrigues8688 2 жыл бұрын
All your tutorials are hot!!!!!!!!!
@OnMars3D 2 жыл бұрын
Appreciate it!
@untextured3d60 2 жыл бұрын
Best tire modeling tutorial ever.. You have one new big fan 😊... Can you please share your reference board? It's hard to find the exact pictures and I want to follow along please 🙏
@OnMars3D 2 жыл бұрын
Glad you found this helpful! I just did a google search for the tire and pulled the images from the tire website.
@HBGoneGlobal 9 ай бұрын
How do you Uv unwrap the side wall? How to you lay it out in a straight line to put text on it?
@kirill.shilov 2 жыл бұрын
Thank you so much for your tutorials! I have one possibly stupid question, but... In this video and in the previos one (Rim creation) you said "It doesn't have to be 100% perfect" (the precise copy). So my question is: why does it have no need to be the exact copy? And the second question is: could you please cite a situation when we have to recreate the absolute copy? Thank you!
@OnMars3D 2 жыл бұрын
It comes down to the need and context. For VFX, it needs to be close where it looks like a "digital twin" but does not need to be accurate down to the millimeter. For that type of accuracy, CAD would need to be used. This is based on my experience after working in the CGI industry for over a decade. Hope it helps!
@TheLarkaanimation 3 жыл бұрын
Does this method work on more complex tire treads? I'm having trouble with a Bridgestone tire.
@OnMars3D 3 жыл бұрын
Yup, this works for any type of tread as long as you find the repeatable pattern to model and then use radial symmetry.
@tf5820 2 жыл бұрын
16:11 Although I select quad draw, it cannot be selected all but only surface 1. How can it be selected all?
@OnMars3D 2 жыл бұрын
You need to enable "Instance" in the Duplicate Special settings, not "Copy"
@tf5820 2 жыл бұрын
Thank you. Let me try
@chtcultures Жыл бұрын
How do making metal part
@OnMars3D Жыл бұрын
I have the video here: kzfaq.info/get/bejne/pdSKaLGC29qqYXU.html
@aravindmk1273 6 ай бұрын
unwrap and uv map of tire threads will be difficult
@OnMars3D 6 ай бұрын
Nope, you just need to unwrap the original instance of tread which is 5 simple pieces. The UVs will then apply to the rest of the instanced tread.
@txlec99 Жыл бұрын
is it just me or is it true that modeling in maya is a little harder than most of the other 3d software like max or even blender is wayyyyyy easier now?
@mrmiyagi6940 2 ай бұрын
Boolean +quad remesh=done
@ThraceKelsick 7 ай бұрын
Why not just undistort the photography in Photoshop? Would be much simpler than trying to guess the placement and angles against a photo that has lots of barrel distortion. Also, you might want to do some self analysis on repetition of rhetoric...You use the word "here" like 800 times throughout the video