Motorcycle Handlebar Switches + M Unit Alternative | Purpose Built Moto
Рет қаралды 10,413
Күн бұрынA full run down of our line of switches and M unit alternative, digital control units. Our custom Handlebar Switches are built for a sleek and clean handlebar.
Following our “less is more” philosophy, they are designed to reduce the clutter on your handlebar and give your custom motorcycle a modern look. The Black Box V3 update in our Electronic Control brings new features for an improved performance and extremely compact size.
Switches range: purposebuiltmoto.com/product-...
Black Box V3 - Digital Control Unit: purposebuiltmoto.com/product-...
@PurposeBuiltMoto 2 жыл бұрын
Check out our Black Box + Switches. The easiest way to re-wire your custom bike. purposebuiltmoto.com/product-category/control-relay/
@juanmaza8575 2 ай бұрын
The turn signal switch assembly on my 2012 Honda Shadow Spirit is acting up even though I took it apart and cleaned it so I’m glad I found this video
@johnnymeredith2360 2 жыл бұрын
Just talked to you on IG, this is what I was looking for very very cool. Love the price point and the actual size.
@PurposeBuiltMoto 2 жыл бұрын
Thanks John, We have a few blogs with more detail linked in the video notes. check those out.
@codygranger5155 2 жыл бұрын
Awesome looking, well thought out product. Look forward to finding a project to use this on!
@PurposeBuiltMoto 2 жыл бұрын
Thanks man!
@bikerbrinrac Жыл бұрын
Cool small control black box. Very neat wiring job on the Thruxton 👍
@PurposeBuiltMoto Жыл бұрын
Thanks Mike, The Black Box makes life pretty easy on a re-wire.
@MotoMango 2 жыл бұрын
Something I've been meaning to tackle for awhile. Planning on my next build to totally replace old wiring harness. 🤘🤘
@PurposeBuiltMoto 2 жыл бұрын
We do it on all our customs. It lowers the chance of an electrical fault a whole lot. Especially on the older motorcycles
@jovialjesus7144 Жыл бұрын
G'day guys, looks like an awesome setup and the price is on point, could you tell me what are the differences with the motogadged m unit?
@PurposeBuiltMoto Жыл бұрын
This is a far simpler bare bones set up. Check out the link in the comments for more info and videos on the product
@advhawk6455 Жыл бұрын
I was looking at Motogadget stuff to finish off my KZ650 resto-mod build (ZRX1100 front end, swingarm, wheels, and brakes), but I found this video. I'm using re-pop 1982 Kaw replica switchgear on the handlebars. Will your Black Box Control Module work with that setup? I need all the switches to work as designed and intended.
@PurposeBuiltMoto Жыл бұрын
Hey, Thanks for your interest. Our module is simplified to work with custom momentary buttons only. The idea is to clean up your handlebars to a more minimal spec than stock
@DrifterDavid Жыл бұрын
I am guessing I already know the answer to this but does the box need a constant 12v signal? I have a bike I am trying to install custom controls on that does not use a battery. Right now it outputs ac voltage too but I can convert that easy enough. But really have zero space to mount a battery that won't detract from the look of the bike.
@PurposeBuiltMoto Жыл бұрын
We recommend the use of a capacitor/battery delete atleast. Most direct systems don’t supply clean enough vintage
@laurensbenesch8324 Жыл бұрын
Hi, I am planning on rewiring my ´82 Sr500 2j4 which i removed the battery from since it doesnt need one due to kickstart. my question is, does this kit function on a no-battery system ? Thanks a lot!
@PurposeBuiltMoto Жыл бұрын
Hey Laurens, great question. Yes the module will operate with a battery eliminator, but for best operation of this module and any LED lighting you wish to use, we find it best to use a very small battery on kick start bikes.
@01thomasss 2 ай бұрын
Hi What the maximum headlight current I could run through your blackbox?
@PurposeBuiltMoto 2 ай бұрын
All of the product specs are listed on the website on the product page
@oclv110sl Жыл бұрын
I'd like to replace the factory plastic switches on my 2015 BMW R9T but it has canbus. Is this possible? Thanks
@PurposeBuiltMoto Жыл бұрын
Hey Paul, Yes it’s possible but you need to take care to replace the function buttons for your ride modes and settings aswell. You’ll also need to use a control module and breakout box for the conversion
@oclv110sl Жыл бұрын
@@PurposeBuiltMoto thanks. Where's the best place to look for information on a project like this? Thanks.
@PurposeBuiltMoto Жыл бұрын
@@oclv110sl I’m not sure for specific info about the R-nineT just try riders groups and forums. Guys have definitely done it before
@TAGSpartan131 2 жыл бұрын
Hey guys. Do you put a bit of heat shrink on your soldered connections on the button? Also on my Harleys got the throttle by wire all integrated into the right hand controls, I think, took them apart and put them back together when I put some new scrambler style handle bars on. So I think I’d need some kind of new throttle setup to be able to rock these buttons. Do you guys have something in your shop for this? (If I’m correct of course)
@PurposeBuiltMoto 2 жыл бұрын
Hey Alex Yeah thats right mate, we have another video linked on the video description about button installs (when I had a beard!) You can purchase aftermarket throttle by wire set ups for your bike, but we don’t sell them. Hope that’s helps man!
@Warriorkikass Жыл бұрын
Can this be easily installed on a 2020 royal Enfield interceptor 650?
@PurposeBuiltMoto Жыл бұрын
Yeah with the use of our black box it will be no problem
@B.O.S.H_music Жыл бұрын
I have the electrical knowledge of a caveman Could I install this kit with the included installations, without any existing knowledge?
@PurposeBuiltMoto Жыл бұрын
Most of our customers are in the same boat. Our simple black box and switch kit makes it easy for you, it shouldn’t be a problem.
@BP-xv4bn Жыл бұрын
Can you use this on existing wiring vs having to re wire whole bike
@blackskunk9034 Ай бұрын
yes
@surronzak8154 2 жыл бұрын
Why don’t just make the controls with latching butons? Would be a lot cheaper, what about you selling latching butons option without black box?
@PurposeBuiltMoto 2 жыл бұрын
We want the cleanest possible handlebar, and latching buttons require a lot more room. This way you can hideyour switching under the seat with the added bonus of a self time out indicator
@graywolf5272 Жыл бұрын
Wiring on my harnesses is different than the one on my handlebar controller switches
@graywolf5272 Жыл бұрын
I need to know what
@bassstudent4life 2 жыл бұрын
How is it an alternative without ignition output?
@PurposeBuiltMoto 2 жыл бұрын
What sort of control do you need for an ignition apart from switched power and a kill switch?
@bassstudent4life 2 жыл бұрын
@@PurposeBuiltMoto Where would some of the CDI wires go?
@PurposeBuiltMoto 2 жыл бұрын
Ah, you need to understand a bit more about how this all works. Maybe go read out motorcycle wiring 101 for more info. In short. None of that section of wiring goes through an M-unit, or our black box. it’s totally seperate.
@bassstudent4life 2 жыл бұрын
@@PurposeBuiltMoto We'll take your advice and continue to read on motorcycle wiring 101 because one can NEVER stop learning unless you're an idiot. We specialized in k100 and vstar 1100 and all of our builds' CDI/ECU go directly to the m-unit blue ignition out. So your box CAN NOT replace the m-unit WITHOUT additional pieces.
@PurposeBuiltMoto 2 жыл бұрын
@@bassstudent4life Yes, with a switched positive and/or a kill switch wire, both of which the black box has. You're arguing against yourself here, on a product you clearly don't really understand. Here's some more info: purposebuiltmoto.com/motorcycle-electrics-101-explanation-of-motorcycle-electrics/ purposebuiltmoto.com/motorcycle-electrics-101-re-wiring-your-cafe-racer/
Cognito Moto
Рет қаралды 26 М.
Cafe Racer Garage
Рет қаралды 121 М.
Cafe Chronicles
Рет қаралды 28 М.
Revival Cycles
Рет қаралды 35 М.
Purpose Built Moto
Рет қаралды 30 М.
narezka:)
Рет қаралды 707 М.