Rat crap Craig

Hey, that duct tape is gonna peel after a bit of use, my suggestion would be to get an old T-shirt to put over the top. Just to keep it from adhesive getting all over you and your clothing.

I like how you get all excited when you finish a little project. I love that feeling when you finish something on the truck and it turned out better than you expected or went together easier than you thought. Cool videos man

I was grew up in an a F100. They're special to me.

Nice!!!! The seats look great can't wait to see the finished product . You're doing a good job and most importantly you're doing it with love that's why Everytime I see one of your videos I feel like going and working on my truck , a 95 short bed 5.0. good video.

Awesome job, those seat brackets sure made life easy!

Nice i always feel better when everything fits rock on.

Love the truck, putting buckets in it was a good thing! Did the same in my 68 Ford beat thing I ever did 👍🏻

Good choice going w the Mustang seats n truck brackets. Mustang upholstery will be avail forever. 68 the perfect choice on year model for this application .. you're threading the needle.

Looks great, I've been waiting for this

its mint! just like factory. and it looks so comfortable, hope it is!

Looks sick dude! Keep it up

I like the bucket seats man they look good in the truck.

Those are nice seats good job

65°F is "winter". Up here in Northern Michigan, that means Beach weather hahah

Dude I almost thought you spray primed those brackets in the rocks 😐🤔😎 hahahah its degreaser, you got me!!😆

looks good 🇺🇸

Looks good and keep up the good vids

Just grabbed some near perfect 2011 Ford Fusion leather power seats for the F100. 35 bucks each from Pull-a-Part. Can't wait to convert!

I did something similar to this, I put 1998 Jeep Grand Cherokee bucket seats in my 1988 Dodge D100 Single Cab with factory bucket seats, and I can't complain lol

Those are badass seats

Great video Craig

The seat cleaning makes me wanna work on and clean the interrior of my 72 bronco lmao Nice vid

Nice job, black factory buckets/ Perhaps the only thing I might have done a little differently would have been to put some duct tape adhesive side out behind the areas with holes in before putting the outside layer on. As you've done it the adhesive will stick to the foam and may pull it apart leaving you to have to source new seat back foam when you have it re-trimmed. Robert Spray's idea is also a good one as the adhesive on duct tape can be pretty aggressive and when it starts to peel it can easily pull threads or stretch any clothes you're wearing that stick to it. It can also stain some types of fabrics and finishes...

LMC has replacement seat belts for a good price. They have 3 point too if you wanna upgrade to that. I believe with the 3-point you wouldn't have to worry about your belt laying on the floorboard

Good install. Seats look good in the cab. Now need to build a platform between seats to hold beer cooler. You can get new seat covers from CJ pony parts and other mustang supply places or order directly from TMI. Very easy to refoam and recover yourself. Tmiproducts.com has some really nice foam and upolstery upgrades that will add bolstering to help keep you on the seat while cornering.

you can buy exact reproduction bucket seat brackets, the PDF files are on Fordification, I used to offer them for sale. my buddy Kevin Stone makes and sells them now 65-66 brackets are different from 67-72. one inch difference in seat location. enjoy the build!

the duct tape looks better than i expected hahahaha. if it was me i'd just leave it for now. i also made a denny's run today and fuck with dennys heavy

Craig those seats that you have are out of a 68 Mustang. an easy way to tell is that chrome lever on the out side of the seats. 1967 Mustangs did not have that. the seat upholstery for 1968 is to big for a 1967 seat. the 68 seat is back is larger to make room for the lever assembly. don,t ask me how i know about this.

71 f100 sport custom factory buckets 460 4 speed with a.c. and heat, been told it's rare doing crown Vic rear end rear end swap with four link coil overs and either 4.6 mustang gt motor or 351clevelend

Ebay has seat covers as cheap as $8 bucks a seat but, a decent cheap set of new vinyl is about $70 bucks. $20 bucks will get you some fabric covers that fit over the seats. nice pickup.

Nice seats.

You can get the exact replacement seat cover for that seat mustang interior easy enough

your the best

It looks BadAss bro 16:15

She was the same color as my 70 f100 2x4 that I made 4x4 beautiful truck I miss mine like you would not know

And just my two cents , you could always take a console out of an old Blazer, (they reproduce them on Lmc) and stick it between the seats

Cover the ductape with a saddle back seat cover. Since your doing the patina old rugged style those will add to it nicely.

We are going to do new seat material on our bench seat, just with racing harnesses :D

I like using more modern seats with power and heat. Got a set from a 2010 Malibu ltz for my 64 chevelle. Mint condition power heat leather $150 was a deal. A lot of foreign cars have really nice seats also just walk through the yard seeing which ones fit your ass the best.

I’ve got a 78’ with red interior found some 1980 red button hook leather seats from a thunderbird with power adjustments

u could try your skillz of cutting the floor out & lowering it way down ( or try on an old cab similar to your's -- or take it to a body person & have them do it all professinally like.. & all done right too then & no more worry's then ).... so your tall self can sit very comfy in your own rig at any stop light any where........

Those seats look pretty good, ive got some seats from my 1963 corvair that ive been needing to work on theyre in about the shape as those but alot stiffer

I'm actually gonna do the opposite and put a bench in my truck instead of buckets lol but those seats are still nice as hell

Installed 65 mustang bucket seats in my 68 f250 highboy had to fab my brackets though.

Nice

Huh yas queen thanks for the tips sister supported

you can buy the covers and foam from ebay or a mustang parts depot, they are 68 seats

60 degrees and its winter. It is 34 with a wind chill of 24 here and that is a warm winter day here.

Look at an 88 bronco for your seat belt buckles. They have a built in support so they won’t just be laying in the floor

Oven cleaner is a caustic, not acidic, but it is a good cleaner.

Good on ya , my 79 Ranger XLT same thing bench it too high I can’t wear cowboy hat as my head is way to close to the roof ....

Now wait a minute...Black 200 mph tape was def the right choice.

Late 80s jeep Wrangler for your seat belts with built in support

Safety 3rd kids

Hey what shifter is that you're using? I know it's probably a hurst, but got a part number or anything?

Put a Piece of Metal between the seats and tank for some protection just a suggestion

nice seats dude great choice, is it the ones that came out of a boat, i think you said in a earlier video?

👍👍👍👍

Nice mod!

What are your other interior plans? Center console? Floor mat or carpet? Stereo?

What are the brackets out of? Do they have them new? Id love to put a set of early mustang buckets in my 74

Now your sitting against a bare gas tank though- is there some sort of body panel, like a door panel that covers it? Trucks bad ass by the way...

Craig I also struggle to see stop lights in my 68 f100 I’m 18 and 6”3 I kinda slide down the seat a bit but trust buckets and chopped brackets are coming soon

I personally like the bucket seats. I would to this with my trucks. I'm curious if other brands had the options for buckets

I woulda left the bench seat I LOVE bench seats

I have the same problem I’m 6’3 and I drive a 98 ford ranger and I’m gonna have to get some lower bucket seats

where did you get your dashboard pad and headlights?

Ever thought about doing bed liner for your inside can floor? That would be way durable and will keep things rust free...but you definitely need to paint the inside of the cab like black...keep it a modern color

I have a Mexican blanket over my 60 F100's roached JY special 91 F150 bench I scored for 20$ and the blanky was $Free.99

When’s the center console build coming

The seat on the right looks like three squirrels were clawing against each other for an acorn.

Try the seat shop.com motion auto TV used them to replace the foam and seat covers in his ford truck

You should get a full size Bronco console it should fit and give you cupholders and storage.

what happened to the buckets from the other truck you bought? didn't you buy that truck for those seats.

even tho every 1 knew the bucket seat's were your's end of story...... i'm a bit curious of what all crazy or really dumb offers u still got for the bucket seat's........... VERY GLAD U KEPT THEM FOR YOUR SELF U DESERVE 'EM......

Where did you buy the gas thank?

Should bed liner the floor to clean the interior up a bit.

no center console!It's where the bee....taurine drinks go.

My 75 j10 has some old mustang seats like that

So why didn’t you go with a t56? And instead a 5 speed? I’m thinking about to put a manual into my mustang

You should get sound deadening material and a rubber floor mat at LMC truck.

In the heat the duct tape adhesive is going to leak thru and stick to you

Hey if it’s so hard to find these brackets ? Why don’t you look into remanufacturing them?

Have you ever noticed the old poots getting close and saying 'this is what a truck should smell like".

I love this truck but since its so nice i say it deserves carpet

Kinda makes me want to put bucket seats in my 78 k20

All u need now is some sort of center console

Do you know of any good products and methods of getting rid of oil stains on pavement?

I have a 1997 f250 heavy duty, and my trans is all covered in oil that has kind of crystallized on it, what is the best way to get it off so I can fined the leak

What about the shifter you were saving for the bucket swap!?!?

Where would you find the brackets to do the swap ?

No updates on the frame with the crown vic setup

r ya going to find or build your own cool center console for your ford rig.........????????????

This is just my opinion but I like the look of bench seats better

😀

Next video could be a DIY console.

Put a newer ford centre console in it. That would look mint

Are you going to put in a center console

Where did you get your wheels?