NOTIFICATION SQUAD ! Man ive been following your build...i wish i would have the time or just the patience to film my whole build, this helps so much to somebody thats completely new to it. Thanks for doing what you do ! You need to film some cutting once you get some time. Also, congrats on the baby !

Good luck with the channel going forward 👍

I finally got my MPCNC cutting, just need to build a table and get the drag links on. You were right the dual endstop setup was no problem at all.

Such a clean looking build and enclosure! Great work! Thanks for sharing. 😊 I'll echo another posters suggestion to measure the deflection at the tool if you ever find the time.

Looks good! I will be posting my modifications to the Cisco power supply this afternoon.

Having build the MPCNC and the Lowrider, i found the PrintNC on your video. It will replace my MPCNC. I like the MPCNC, allows you to "get your feet wet" but since most of my stuff is aluminium, i will pull the trigger and build one. The lowrider was built specifically to cut a couple sheets of plywood for a project and then i disassembled it. As controller, ive built one based on GRBL ESP and i really loved it! so for now, i will use it.. Thanks!

Love it! For me at least it dosnt matter to much what your projects are, if it includes the cnc or the 3d printer I am likely to be interested. Very much looking forward to see what you do with the machine and the projects you tackle.

Looks great

I've basically got my mechanical parts assembled. Need to take them back apart to paint them and then reassemble and square things. Your videos have been very helpful and are what got me on this path from my MPCNC, so thank you. One thought is that throughout your build various details about your build have been mentioned but I haven't always seen links, other than to Discord and the Wiki. I was thinking that it would be very helpful if the Wiki maybe had a section for builders to put up items from their projects. For example, it would be nice if you could share your Linux CNC files just as an example and to give a starting point for people like me who don't have any experience with this program/OS. I know the information is getting better but I still spend a lot of time searching for the bits and pieces. It's still a way from being a simple/user-friendly project but it is improving. BTW, congratulations on the new addition to the family. I was wondering how much it was going to affect your ability to use your CNC and I'm glad your soundproofing techniques are working so well.

I really like your videos, good job! Could you post a link to the Ali store where you bought those cheap end mills?

I bought 30 meters of mild steel tube (60x30x2mm) per 80$ for all 30 meters😃 So, my build starts soon)

Love your work Brian. Can i ask how dimensionally accurate parts your machine is able to produce in aluminium? From what i’ve seen so far, the PrintNC is really impressive for the price!

Thank you sir

Good stuff. You inspired me to build a CNC too :) I don't have that much space though so opted for a smaller one. What's the deflection you're getting on the end mill when you pull it front-back-left-right by hand?

Thanks for the video, what VFD cable did you order/do you have a link to it? Thank you agian

Did the sound tiles inside the box really do anything? Most sound insulation should come from the rockwool on the wall.

I just discovered you by a comment you made to another youtuber. I'm also a fellow Brian! With an "i" no doubt! All those wack "y" brian's can take a hike. Looking forward to watching your vids. Just seeing the background in this vid I wanna see how you made that enclosure for sure!

hi what is the real working height in the z-axis? Thank you

Hi Bryan! Congrats for your job, is really amazing... I have a question respect to profile dimension, is possible using a 100x50x3 profile? In me country not is possible find 75x50 or 80x50...

links to sound panels, endmills, and VFD cables? Thanks looks great man!

I built a vertical mill partially because I wanted to hog out 60% keyboard cases and parts lol. Good stuff. Personally, I wish we could source kits here in the USA instead of using flipping aliexpress and china but only really high-end stuff gets made here that you have to ask to find out how much something costs lol.

Are you from North Carolina? Or does the NC represent something else? Lol I get my CNC this week

So, If you did it all over again, would you still start with the MPCNC?

Show more on your LinuxCNC config.

I've been following the build and would love to see a comparison video of the MPCNC to the PrintNC. I'm one long weekend away from starting the prints and buying the kit for the MPCNC but since it can't cut metal I've been holding off. Also, what is the different in the V3 version of the PrintNC?

What’s the link for the Ali express kit?

make a 4th axis project ,then compare diy or buy lathe chuck, make a lathe chuck from aluminium that will be interesting and useful too