2010 and up dodge caravan lock fix

Рет қаралды 101,808

8 жыл бұрын

Пікірлер: 62

@gilleslebrun7779 5 жыл бұрын

My bit of advice: DO NOT remove the 4 screws holding the window regulator mechanism on the panel, if you do, you will have to rewind the wires on the spool and it must be done the right way to avoid having the control sequence reversed at the control button. The motor can be removed but do not remove the 2 screws holding the spool mounting plate in place.

@GB-rb1up 3 жыл бұрын

Could you please explain? I don't want to screw this up.

@lauragilloon633 6 жыл бұрын

Thank you for making this video. I am pretty sure this is what is happening with our van. I will let you know if it works.

@andybody7542 2 жыл бұрын

READ THIS - IF YOUR SLIDING DOOR IS STUCK AND UNABLE TO OPEN. I was unable to open driver side sliding door for months (no buzzing noise from lock mechanism on this side). The manual lock actuator for this door was stuck and could not be forced. The tip about pressing the unlock button and forcing the manual door lock at the same time worked to release the actuator!! KEEP IN MIND... This did not work when using the unlock button on the remote... I had to use the unlock button on the driver door. Now the door lock on this side works fine (like it was never broken). Not sure how long this will last but at least I can open the door currently. Update: FYI... 9 Months later, the door lock is still working fine...

@scotthester2189 4 жыл бұрын

I think I will be taking my to the dealership, the video always gives you the impression its easier than what it really is.

@CHASINGPROFITS 3 жыл бұрын

ye maybe sometimes got to bite the bullet

@douglong9932 4 жыл бұрын

Thanks very much for posting this video. I had a similar problem, but it turns out the lock mechanism was jammed due to lack of lubrication, and the motor could not move it. It did hum or make any noise at all. Once so freed up the mechanism and lubed it, everything worked. But, your video helped me get to the problem.

@superjuggalo99 4 жыл бұрын

8 months later. How's it holding up?

@douglong9932 4 жыл бұрын

Michael Pearson It still works but now the lock motor is buzzing, so I will finally have to replace it..lol

@CHASINGPROFITS 3 жыл бұрын

pb blaster baby

@philmeyers6610 5 жыл бұрын

This was actually really helpful. Is there a video on the assembly?

@Gixxer-Mo 3 жыл бұрын

I'm speechless !

@petepull4544 7 жыл бұрын

did you ever record the assembly process of the Dodge caravan sliding door lock.?

@danielhucklebridge5006 3 жыл бұрын

good step - by - step instruction.

@CHASINGPROFITS 3 жыл бұрын

thanks

@roadrunners2014 6 жыл бұрын

Very smart actually to disassemble PRIOR to ordering. Nothing worse than doing the job with a wrong part already in hand...

@glytchtwitch5679 4 жыл бұрын

I've never laughed so hard in my life. 😂 the problem with the door is it's old. If that's not good enough, blame the kids.🤦‍♂️ WTF. 😂

@roadrunners2014 6 жыл бұрын

Also. Can we get a part number you ordered? I am looking to knock out this project this weekend.

@wale8308 4 жыл бұрын

i had the same issue , the left motor onthe sliding door making the same sounds its 2016 grand caravan , with 40k miles . while the right sliding doesn’t lock 🔒 at all.. even tho it open manually and with remote. any idea what to do?

@spawntohell 6 жыл бұрын

5 stars from me, as you confirmed the central lock motor is my issue with the noise, second... fair play for the video is not the best but made me realize not and what to do, as when i started doing this i would of made some ofbyour mistakes also... as for the techs, i only had to do this myself as in england when you walk in a garage with issue like this they laugh at you and refuse the work....

@Jeffs9304 3 жыл бұрын

Would make a great drinking game

@cschwehr 4 жыл бұрын

Gets to hardest part, skips it in the video, takes whole window out, says about impossible to put back cords "oh I'll get some help with that." *Sigh*

@jasonweatherly7156 3 жыл бұрын

The shade tree is going to fall on this guy.

@CHASINGPROFITS 3 жыл бұрын

Trust me dude already hit me over the head this year you have no idea

@kinghenrysghostrider 6 жыл бұрын

Little tip, do a run through before you start recording.

@GB-rb1up 3 жыл бұрын

11:09 What 4 bolts? Need clarification.

@iambobby3537 4 жыл бұрын

ok. now I want to sell my van

@CHASINGPROFITS 4 жыл бұрын

lets do it

@greenman8902 10 ай бұрын

Can this going bad make the fob not work?

$@fracasta7378$

@fracasta7378 5 жыл бұрын

Please use power tools

@antonutiu6311 6 жыл бұрын

That happens to me right now and I can't open the door at all ... Any ideas!?!?

@realpromoving6001 4 жыл бұрын

Same problem

@andybody7542 2 жыл бұрын

@antawnstokes 3 жыл бұрын

They know the issues but no recalls thats messed up

@vimasizzle4292 4 жыл бұрын

Unless you know how to take out a window yourself don’t start on this project because you’re going to take everything apart and once you get to remove the window you’re not gonna be able to do it he should have recorded that part because that part is the most important

@CHASINGPROFITS 3 жыл бұрын

recorded well

@DMWDEADMAN 3 жыл бұрын

@@CHASINGPROFITS where is h The recording

@arechj 4 жыл бұрын

How do you open the door if it's stuck? To begin the disassembly?

@2006mrderrickh 4 жыл бұрын

Did you get your door to work? I had to hold down the unlock button inside the door and press unlock and lock on the key fob. That was the only way I was able to open door.

@andybody7542 2 жыл бұрын

@paulnufrio8343 3 жыл бұрын

Everything is made cheap on these vans i have had lots of problems with my 20015 most with in a 2 years !

@MohammadHussain-br9xs 5 жыл бұрын

Hey can you do window regulator install on same side same sliding door

@CHASINGPROFITS 5 жыл бұрын

Yes I can email me randerson0322@gmail.com

@acook8561 5 жыл бұрын

No need to remove glass.

@hammy12323 5 жыл бұрын

How do you get to the assembly without removing the glass. I'm working at in now

@dylanlindsay4353 5 жыл бұрын

Duck tape the window up in the closed position

@ProductsOfMorticians 4 жыл бұрын

@@dylanlindsay4353 - you can also use wood shims jammed between window and body to hold the window up in place.

@CanadaTurk 4 жыл бұрын

you dont need to unscrew most of them even regulator

@midwestfatass 6 жыл бұрын

That wasn't the regulator. Just fyi.

@shaunvvoc 6 жыл бұрын

Which cable(s) unlocks the door? Mine is locked shut and I cant get to the screws I need to.

@CHASINGPROFITS 6 жыл бұрын

Shaun Tube Shaun not sure I believe this is electronic but I would remove the interior panel to access the release. I'm sorry about the reply but please reply with how you did it

@shaunvvoc 6 жыл бұрын

The problem I had was the door was shut. The lock motor had failed so I could not undo the door. I pulled the panel half off (front of panel is attached with screws that can only be undone when door is open). I got heavy handed with lock connecting rod and it moved! That fixed it! Lucky me I now dont need to go any further at the moment. I have a UK 2013 Grand Voyager.

@DMWDEADMAN 3 жыл бұрын

Quick note. You do not have to REMOVE WINDOW. JUST TAPE IT UP AFTER REMOVING bolts that he it in place. Also do now remove window Regulator. You will screw yourslf if you do

@binladen2739 4 жыл бұрын

I think you better find your tools first before doing a video!!

@CHASINGPROFITS 4 жыл бұрын

got em

@tomjgoodwin 5 жыл бұрын

Way too many steps. You disconnected a lot of stuff out of order and didn't need to remove the window, or window regular. Nice try for a first timer. Also, you should always take pictures as you go so you can see what it should look like as you finish.