Simple Trim Bands for underwraps or guides

Рет қаралды 156,185

5 жыл бұрын

This video shows our method for performing simple trim bands for guide wraps and underwraps. Make sure to follow our blog below for the detailed discussion of how we do these. Also, check out our Facebook group for rod builders.
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Palmetto rod and reel website
Http://www.palmettorod.com
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
As The Rod Turns blog
Http://www.palmettorod.com/astherodturns
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Facebook group
/ 1563152320605285
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Instagram
/ palmettorodandreel
/ palmetto_rod_and_reel

Пікірлер: 76

@katherinedicks6437 8 ай бұрын

Excellent spinning rod. Well balanced and took everything saltwater could do to it and still looks new.

@joereid8557 Жыл бұрын

Mary is the coolest and most helpful rodbuilder alive! respect like always

@joebillups4893 3 ай бұрын

Very good explanation and overview. I’m planning to do this on my next build and experimenting a bit on my current build. Thank You!

@Si_Hano 4 жыл бұрын

Wow, that was awesome. One day I'll have to try this. Thanks.

@lancehenthorn17 5 жыл бұрын

Great video. Good instructions and details. I just wish y'all had more videos.

@butchcross4449 4 жыл бұрын

Thanks for the video, very helpful!

@kanchour16 4 жыл бұрын

Amazing work, thank you so much for sharing, very informative.

@josephryan1576 4 жыл бұрын

Nice work. Thank you for sharing

@bradymcphail9690 4 жыл бұрын

I wish you were still sharing your youtube videos. I have never built any rods, but I understand how you explain. I'm waiting for my rod kits to arrive...

@YL-mc9oz 5 жыл бұрын

VERY NICE WORK - LIKE !!!

@brianhagerty9324 4 жыл бұрын

Thanks it really made sense.

@tonygonzalez7029 4 жыл бұрын

Awesome...perfecto instructions...thanks for sharing

@chuckward7403 5 жыл бұрын

Love the technique.

@PalmettoRod 5 жыл бұрын

Thank you!

@SuperDetective13 3 жыл бұрын

Super helpful video!!

@Puuchu 5 жыл бұрын

I'm new to rod wrapping.... and ma'am your technique along with explanation is very easy to understand/follow and straight to the point, thank you for the great video, you just got a new subscriber!

@PalmettoRod 5 жыл бұрын

Thank you very much! I'm glad I could help!

@indeepship____3944 4 жыл бұрын

@@PalmettoRod As someone that is now just getting into it thanks you these are great

@RickMarshallMaps 3 жыл бұрын

Thanks for he great demo

@girl1166 5 жыл бұрын

Awesome!!

@bjmartinez4843 3 жыл бұрын

Awesome Teaching,

@razzso1482 Жыл бұрын

Amazing! Goodjob

@juanmanuelramirezgallo9208 3 жыл бұрын

Excelente video gracias.👍👍👍👍👍👍👏

@craigcampbell2687 2 жыл бұрын

Nicely done

@americanstriper8666 2 жыл бұрын

Best video I've ever seen in underwrap! After this, do you put on the epoxy and then wrap a guide on, or wrap the guide and then epoxy the whole thing at once?

@vonowens3450 2 жыл бұрын

Great video thank you

@Bassinman200 4 жыл бұрын

Since 1972, I have been wrapping guides (stainless ring and a few white ceramic ring back then) with individual threads for trim bands placing each color butted against the next after pull thru. My bands are usually 7-8 wraps in order to hold the over and under tag ends, and as soon as pulled thru an alignmant for centering is done and finalized with a bit of clear nail polish to set and hold the wraps until epoxied. The way demonstrated appears to be substantially more secure on the wraps because the thread is completely under the longitudal underwrap which obviously makes it more secure. Only thing I don't like about this is fiddling with the tag ends to straighten them back out after turning each color of trim, but I will certainly give this a go. I do all my wrapping by hand with a fly bobnin and without aid of any wrapping machines or stands, so this will be a challenge as a newer technique will have to be developed. If it works for me it will be a great help. Thanx. Snyper Custom Rod, Lure, and Knife.

@user-uv6dr9wz9f 9 ай бұрын

what do you use for pull through loops?

@streetcat1510 3 жыл бұрын

Could you please tell me what is the pound/lb tension of the wrapping thread, great video.

@GEEYRADOS818 4 жыл бұрын

hi! when u wrap the guide over the underwrap is it basically the same as wrapping a guide without an underwrap? or is there a special or specific way to do it? does the guide get wrapped ontop after the underwrap is epoxied? if its to much o explain here could u please do a short video on wrapping the guide after wrapping the underwrap? thx

@davidrf1000 5 жыл бұрын

Thanks

@jonyovanno4145 4 жыл бұрын

What wrapping stand are you using?

@alan82669 4 жыл бұрын

Tq info.

@caseG80 4 жыл бұрын

If you have a website you should add the link in your description would help customers be directed to you. Cheers

@PhillipPierceall 2 жыл бұрын

what brand is the power wrapper are you using

@dorflonnigan4413 5 жыл бұрын

Very instructive video thank you. is there a rule of thumb on how long a guide wrap should be, I know a lot is personal preference, but some wraps look way too long to me and I"ve seen others that just look too short, just looking for general rule. thank you

@PalmettoRod 5 жыл бұрын

There really isn't a general rule regarding length. It comes down to personal preference and how you want or don't want to affect the action of a blank. The longer the wrap, the more the epoxy and thread will stiffen it. Some builds that's great for, others it's not. I typically try to keep them as short as possible but also size them to the guide and blank as well.

@dorflonnigan4413 5 жыл бұрын

@@PalmettoRod O.K. Thanks for the reply

@adamsoutdoors 3 жыл бұрын

Would have liked to see it finished with the guide attached.

@thankfullife7968 5 жыл бұрын

gorgeous work what type thread have you used here ty

@PalmettoRod 5 жыл бұрын

Voodoo black coal and Madeira 40wt.

@thankfullife7968 5 жыл бұрын

Palmetto Rod tnx very much. I’m looking forward to starting to build my own rods and only resource I have currently is mudhole so I’ll check to see if they carry that thread

@PalmettoRod 5 жыл бұрын

@@thankfullife7968 actually mudhole doesn't carry either. We purchased the black coal from voodoo rods and the madiera from Billy Vivona at xlrods@yahoo.com. His website is northeastrodbuilders.com

@washy81 5 жыл бұрын

Do you put a coat of cp or finish on before you wrap the guide on?

@PalmettoRod 5 жыл бұрын

On these, I put CP on the trim bands but not the black. I then overwrapped with black for the feet

@mandolin8297 2 жыл бұрын

EXCELLENT WORK! I need to remind myself to NOT trim the nails on my index fingers - much easier to push those threads snug when there's a little space between them. I do believe women are better at this kind of fine detail work, thanks to fine motor coordination skills and smaller slenderer fingers. Oh, yeah, and better color perception compared to males who have fewer "cones" in their eyes and tend to be more often color blind compared to females. Hey, ever seen Dad (or yourself) wearing one dark blue sock and one black one? Maybe women are a bit more patience too.

@paulbacallo4739 4 жыл бұрын

Nice Video i will be building my next Fly Rod with a single trim band, excellent Trim Band tutorial with step by step explanation. Just the Auto focus is giving me a head ache. Otherwise you got a new subscriber!!!

@hawaiiaction.1976 3 жыл бұрын

Took forever for one guide

@cjhenry0101 5 жыл бұрын

Would you use this same method for trim bands on spinning rod?

@PalmettoRod 5 жыл бұрын

Doesnt matter the guide. Spinning or casting. Trim bands are all done the same way

@cjhenry0101 5 жыл бұрын

Palmetto Rod I wasn’t sure if having so many tag ends under the main thread wrap would be noticeable because you’d end up with three tag ends on top of a spinning rod blank. Which is the side of the blank you’d be looking at while fishing.

@PalmettoRod 5 жыл бұрын

You just have to make sure you hide and burnish them down. I've done it many times but usually there aren't as many

@three003d 4 жыл бұрын

What is the name brand of your wrapper. I am going to upgrade and would like more options other than pac bay and american wrapper

@PalmettoRod 4 жыл бұрын

Chad L that one is called a custom power wrapper by anglers workshop. You can also look at alps (our other wrapper) and renzetti.

@three003d 4 жыл бұрын

@@PalmettoRod I like the thread cariage

@michaelmartin4247 5 жыл бұрын

Mary, it looks like you might be using dental floss as your pull throughs....if so, would that be waxed or unwaxed floss?

@PalmettoRod 5 жыл бұрын

Actually that's nanofil fishing line!

@cjhenry0101 5 жыл бұрын

Palmetto Rod what lb test nanofil do you use? I’ve seen the flexcoat guys use 15lb Super Slick power pro. I wonder if nanofil is better.

@PalmettoRod 5 жыл бұрын

We use 17 lb nanofil.

@jtee9548 5 жыл бұрын

Great video, but turn the friggin' auto focus off!

@MADFISHINREELS 4 жыл бұрын

Why are you not making anymore KZfaq videos?

@cannedheat6301 4 жыл бұрын

Never occurred to me how handy some long fingernails might be.

@andikusuma5271 5 жыл бұрын

is there a contact wathshap that you can contact to order a wrapping tool to Indonesia sis

@PalmettoRod 5 жыл бұрын

What wrapping tool are you looking for?

@hawaiiaction.1976 3 жыл бұрын

I do it way different and easier

@PalmettoRod 3 жыл бұрын

Congratulations?

@BPFinternational 5 жыл бұрын

Tip is great but please lose the auto focus is killing your video

@PalmettoRod 5 жыл бұрын

Thanks Tom, we have been using our phone and and tablet cameras but I agree. We are hoping to upgrade to something less annoying 😊

@BPFinternational 5 жыл бұрын

@@PalmettoRod No Need to buy something new just turn it offAE/AF Lock In iOS 5 and higher, the Camera app includes an AE/AF lock feature to let you lock in auto-exposure or autofocus settings. To turn this on, tap on the screen and hold until you see AE/AF Lock appear at the bottom of the screen.To turn the lock off, tap the screen again. Works with: iPhone 3GS and higher.

@Bruiser38 5 жыл бұрын

Yeah I could barely watch it, but her skills are great and she knows how to explain things really well. I hope they can sort that focus thing out and post more vids like this. I don't build any rods but seeing how these are made is super cool. Thanks.

@madeneymar1047 5 жыл бұрын

The wrap is very easy.. But you make hard some one to do.. Make that wrap just ned 3 minute video, but you make 21minute video for that simple wrap..

@brokeanglerinc2410 5 жыл бұрын

Hey man.. she's teaching, delivering knowledge to people..5 mnts or 21 mnts, someone gotta learn smtg from her vid..you as a custom rod maker has no respect towards knowledge..

@madeneymar1047 5 жыл бұрын

Im so sorry bro.. 🙏

@brokeanglerinc2410 5 жыл бұрын

@@madeneymar1047 no probs..i saw u did tutorial too..keep going..may yiur channel grows too..