Snap On MG325 Torque Test: Bad Little Impact Gun

Рет қаралды 29,603

5 жыл бұрын

Snap On MG325 Torque Test, you won't belive what this little 3/8" impact will do !!
Thanks for watching ! I truly appreciate each view that I get on each and every video. For those that leave a comment, I always try to reply but there’s so many videos I may miss one every now and then, but thanks for taking the time to leave a comment, I really appreciate that especially as busy as we all are !
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime ! If you like my content be sure to hit that “Bell” and it will notify you when I have a new video come out.
Here are some of my favorite links to get some super cool items off Amazon.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
Capri Master Bit Socket Set: Capri Tools Master Bit Socket Set, 88-Piece
Milwaukee 3/8” adapter to convert your impact into a 1/4” bit driver:
www.amazon.com/gp/product/B00...
Vampire Tools Kevlar Shears (these bad boys will cut, designed to cut Kevlar so you know they are tough, I love these things!) : www.amazon.com/gp/product/B00...
Vampire Tools 8” Extraction Pliers (these things are amazing):
www.amazon.com/gp/product/B00...
Vampire Tools Super Combo Scissors (these things will cut anything! I’ve cut a bunch of pennys in half with them and they stay sharp):
www.amazon.com/gp/product/B00...
Lang Tools Master Feeler Gauge Set (the most complete and best feeler Gauge Set I have found):
www.amazon.com/gp/product/B00...
Power Probe Master Combo Kit (this thing makes finding broken wires a breeze):
www.amazon.com/gp/product/B00...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light and it is very bright):
www.amazon.com/gp/product/B01...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com/gp/product/B00...
Streamlight Stylus Pro Rechargeable Flashlight (I carry this in my pocket daily):
www.amazon.com/gp/product/B00...
Coast A9R Rechargeable Penlight (this is an amazing light, wear it in my shirt pocket, the circular beam is awesome!):
www.amazon.com/gp/product/B00...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com/gp/product/B00...
If your tools are stained or really dirty then Citrol is your friend ! This stuff works magic on rubber grips, impact guns, plastic etc. :
www.amazon.com/gp/product/B00...
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow me on Instagram: KoonTrucking
Check out www.vampiretools.com and use the Coupon Code: KOON15 for a 15% discount off your entire order plus get free shipping to anywhere in the Continental U.S.
Be watching for upcoming videos as we put these Vampire Tools to the test !

Пікірлер: 146

@billpickens2022 5 жыл бұрын

Ok folks, my arm is ok! And we rarely get a chance to find the air conditioner at work so we're used to being wringing wet with sweat all day so we're used to the heat!

@stevenragsdale9603 2 жыл бұрын

The MG325 is a beast. One of the best air impacts I’ve ever bought

@coreysuttles1362 5 жыл бұрын

I’m so happy you guys make videos like this it helps me decide what to get and what not to get. Thank you as always for your badass videos!!!

@stewartgarrett3187 4 жыл бұрын

Try it on a cold wheel nut that hasn’t been taken on and off over 30 times.

@MrAruba62 5 жыл бұрын

Well I thought about one for a while. After watching this video guess who’s going to be a proud owner of a green mg325 now?

@waynejames6596 5 жыл бұрын

I'm watching this wondering what is going to break first, the gun, the socket, the wheel stud, the torque wrench or bill, that is stupid crazy for a 3/8 gun, another quality you guys are costing me money lol

@bobbygarrett9588 5 жыл бұрын

Most Impressive! Poor ole Bill needs the rest of the day off! That was a hell of a work out... Good job Guys, and as always Great Video! Most Informative Channel on You Tube. Thanks Again.

@Tap-a-roo 4 жыл бұрын

I think your shop is the first one I've seen that actually has proper air. The irony is real tool reviews manipulated their air gun tests with Snap-on to "show" it was the same as harbor freight. Great video. I'm sure the heated threads made it easier for the impact to break it loose, but you're also using an adapter which should more or less equalize that out. Overall, great video.

@matthewkight5257 5 жыл бұрын

Damn poor Bill hardly ever gets to hold the camera... lol love it guys keep’em coming!

@riosconcretellc5321 5 жыл бұрын

Love these videos!

@MrADVANCEDTEK 4 жыл бұрын

I've been using the Snap-On MG 3/8" impact for over 15yrs. First one was a MG31! Loved it only thing is you have to start replacing broken sockets then your gun. That little gun is a beast and it sounds awesome! A little too powerful it'll destroy the anvil not to mention the finger hazard. Don't use rubber gloves when using a wobble socket. You get your finger near the anvil and if you slip off the bolt head there will be some serious pain and possible broken digits if your glove catches. It's no joke it'll hurt you if you get careless. Definitely read the manual! I think the MG31 had a harder hit then the newer MG325. I got my first one as a newly traded in buy and bought a new MG325 as a spare a week later it's that good. It's still my fav 3/8 air impact. They stopped rebuilding the MG31's and my black MG325 has been at their repair shop for almost two months. Down to my last one. Thinking about a green MG as a gift for myself this xmas. They made a MG51 which is the same gun with a 1/2" anvil I think the newer model is a MG3255 for those who are looking at that option. Same gun just with the bigger anvil.

@troypetersen9463 5 жыл бұрын

If the wrench goes any more, poor Bill is gonna have arms like Popeyes!

@NoPrepFans 5 жыл бұрын

That gun will not stop very impressive

@billythemechanic8233 5 жыл бұрын

Great video clay those are some bad a$$ impacts I love mine rarely do I use the 725

@chucktherepairguy1108 4 жыл бұрын

Wow I'm impressed tough little gun and I'm also surprised that the adapter didn't break

@johnstrodtman1801 5 жыл бұрын

Holy s**t! Well guess I'll be buying one myself next week

@THExLAWxMAN 5 жыл бұрын

Just plain bad ass..!!! Will it ever stop, yo I don't know.. to the extreme.

@lancesurgeon7614 4 жыл бұрын

Diesel keeps coming around trying to figure out why you’re taking so long to fix that tire. LOL!!!

@jobysmith4201 5 жыл бұрын

I just bought one last month and was starting to have buyers remorse about the price. Thank you for removing all doubts.

@MarkWilliams-vp7xw Жыл бұрын

I just bought one of these slightly used off the Snapon truck for $125 thing is an absolute animal

@ranct1815 5 жыл бұрын

😯 WOW! Impressive 🤔 Dag Gon it Clay now I gotta buy the gun and I just got a 2767 Milwaukee because of one your torque test...

@gagnon124 5 жыл бұрын

This is why I love air tools

@vickenkaragozian2041 4 жыл бұрын

The nut busting torque is 425 ft.lb ..I have one and it says in the owner's manual. Great gun..Thanks for the video

@dickysnader3264 5 жыл бұрын

cool I might have to pick one up

@eddiegarcia5387 5 жыл бұрын

AMAZING!!!!

@Jpilgrim30 5 жыл бұрын

I love my snap on MG guns. They have an original sound to them and it sounds mean.

@mattmcmillan8920 5 жыл бұрын

Wild Bill and the Bad Boy I don't know Clay might be trouble, I,ve watched all your Impact video,s you have done and I will have to say I am Impressed that is one Bad A$$ 3/8 .

@KoonTrucking 5 жыл бұрын

It’s bad ! That little gun is awesome

@normansmith7806 5 жыл бұрын

I like my MG325 but that is awesome !

@aaronstrait5532 5 жыл бұрын

My snap on guy showed up this morning and I was contemplating buying it but I didn't after I just watched this video I am buying one for sure now great video!

@wizard7mm 4 жыл бұрын

Won't be putting a wobble socket on that bitch

@donaldhollums3278 5 жыл бұрын

That’s a, sho nuff, stout lil’ impact. Ole Bill worked harder than the impact did, I’m sure I saw wipe his brow one time.

@travisgustin4677 5 жыл бұрын

Snap on Corp. should send you one free of charge considering this video probably sold a lot of guns for them!

@jordanwilcox4723 3 жыл бұрын

I was gonna get one of them but i looked at the size and it is bigger than my Milwaukee m18 3/8 nut runner so i am gonna get the Mac tool mini 3/8 one since it is only 4.4" long aswell as that they say it has more power than the snap on mg325 from what i have seen on the power rating. It is smaller than my battery one so i am gonna get it for when i am doing testing on tanks full of water so my battery one does not get wet when it comes to stripping it and preping it.

@jasonwaldontoolsandmachini8370 5 жыл бұрын

Awesome video Clay... That was damn impressive

@KoonTrucking 5 жыл бұрын

Man it blew me away. I never would have thought it was that strong.

@jasonwaldontoolsandmachini8370 5 жыл бұрын

Koon Trucking ya that things actually probably close to double its rating

@276grant 4 жыл бұрын

I already own one and I watched the whole video...

@austingoleman9431 2 жыл бұрын

That wheel stud is good and seated after this test

@dieseldoctor9294 5 жыл бұрын

HOLY SNAP ON! 600ftlbs in reverse, only hammered for 10 seconds to break it loose, wow! I'm ordering 1 now!

@KoonTrucking 5 жыл бұрын

I told ya it was a bad boy !

@roberthurst5863 4 жыл бұрын

I literally just bought one today an glad I did now after watching this

@KoonTrucking 4 жыл бұрын

They are strong and fast !!

@DonSodaRomero 4 жыл бұрын

Koon Trucking i have the 1/2 MG, so i couldn’t imagine what that would get to

@Huffy_Turns_a_Wrench Жыл бұрын

Hokey Smokes!!! that is one bad gun..... its on my list.....

@raulm116 5 ай бұрын

Had that air for 18yrs. Best miney spent

@chrisz8942 Жыл бұрын

More torque than my Honda, impressive 😮

@dc5723 5 жыл бұрын

Nothing like an air impact!

@hunterwimer1809 4 жыл бұрын

ok im buying the mg325 now bc omg thats insane

@12365465053 4 жыл бұрын

Well I'm sure glad I bought that impact when I had my student discount.

@urahaman1479 5 жыл бұрын

Bad ass for a 3/8..i have the 725 and never ran into a fastener it couldn't take off...actually it couldn't take a few nuts off...instead it snapped the stud in half lol

@Baccamail Жыл бұрын

I’d just picked one up at a pawn shop for about 100 bucks I’m genuinely surprised and hope mine holds up this well

@flat6targa 5 жыл бұрын

Just a tip, your lug nut looked very dry. Make sure you oil the washer and make sure it spins when you have them off.

@SergioPena20 5 жыл бұрын

I always thought this impact was bad ass. When I first bought one it used to piss me off a little because I got used to using an old IR 3/8 gun at work. Well I had to take a rear bumper off one of the buses at work to do a serpentine belt. I think I broke 3 bolts because I stayed on the trigger a little too long.

@deepsquat600 4 жыл бұрын

anyone else notice that when he was at 600 ft pond the torque wrench was actually MOVIG the big rig ....wow

@TheTheomax 5 жыл бұрын

It's always nice to any tool go above it's factory rating But this MG325 went above and beyond. And you will have the one's that say if this or if that I bet the results would be different well that's true with everything in life so get over it. This is a test of the MG325 nothing more nothing less. Thank you for taking the time to film this all of us to see. Oh Nice gun Bill

@KoonTrucking 5 жыл бұрын

Thank you finally someone with common sense ! Haha I appreciate that. That is one BAD little impact gun no matter how you roll the dice or try to twist or criticize that test. It is simply AWESOME!

@jovinhamilton2234 5 жыл бұрын

Best comment I read yet. Good job sir.

@patrickdow2167 5 жыл бұрын

Are there other mechanics in the shop besides you and Bill? Sounds like other trucks being screwed around with in the background but never seen anyone else wrenching in there.

@kevinsilveira4418 4 жыл бұрын

Wow!!!!

@rmartinjr83 5 жыл бұрын

I just bought one

@WizzRacing 2 жыл бұрын

Way I see it.. You either use an Adapter to get in there. Or you can use a ratchet an extension... And yes I even use swivel sockets on them. Go figure...

@davidwalle5025 5 жыл бұрын

Another great and honest test mr. Clay and wild bill. Who makes the air tools for snap on at one time i heard that it was ir. Hamilton would never say anything bad about cornwell or matco unless it was true, more tests

@jasonwaldontoolsandmachini8370 5 жыл бұрын

David Walle snap on makes their own air tools... Google "how its made : impact guns"

@KoonTrucking 5 жыл бұрын

That’s a good video also. Pretty cool to see how they build it and put it all together

@jasonwaldontoolsandmachini8370 5 жыл бұрын

Koon Trucking yep im pretty sure ive seen all "how its made" videos with snap ons tools. Ya it is cool to see how they make everything. Im starting to become a snap on whore thanks to all of you guys by the way lol

@davidwalle5025 5 жыл бұрын

Haasl tools did video showing the mg325 taken apart showing the quality and why it has so much power (8 vanes) sealed bearing. This is a extremely high quality tool. It is also show in green. Hamton needs to change wild bill's to green. See hassl tools "why this snap on tool is so bad" sept 2 2018.

@timblakely7733 5 жыл бұрын

Nice video clay. Will you be doing a torque test on the new Milwaukee 3/8 that’s rated at 600 ft/lbs?

@KoonTrucking 5 жыл бұрын

Probably not ! We are about impact poor at the shop !

@jeffleblanc8850 2 жыл бұрын

That incredible I’m surprised nothing broke is it not hard on the truck rim I was waiting for the rim to break unbelievable poor bill he must be getting sore from torquing them rims down he’s gonna have arms like popeye lol

@warrenfogleman9962 3 жыл бұрын

With an adapter too!!!

@sebastianvaldez6640 Жыл бұрын

I am just curious about the MG3255 battle against IR 2135PTiMAX. 😍

@dchawk81 3 жыл бұрын

Wonder how much better it would do the 480+ if the adapter wasn't there. They obviously introduce a lot of slop.

@willyqueen4066 5 жыл бұрын

Thanks great video that's really cool how much air pressure are you running ?

@KoonTrucking 5 жыл бұрын

@coreysuttles1362 5 жыл бұрын

HOLY FUCKING SHIT!!!!! I just bought the pt850 and damn I should have got this one too!!!

@kevinsilveira4418 4 жыл бұрын

I'm surprised snap on basement fryer to buy that thing back

@kevinfenwick5068 3 жыл бұрын

Damn!

@gabegonzalez5679 5 жыл бұрын

Nice video Clay You should try the same test with the matco 3/8 impact I own one and is a monster.

@KoonTrucking 5 жыл бұрын

We just about impact poor around the shop !! I love to do tests but remember I don’t get paid to do them nor do I get free tools. They are our personal tools we use. If someone wanted to loan one for us to twist the guts out of I would gladly do it !

@gabegonzalez5679 5 жыл бұрын

Yea Clay I will loan you mine. But we’re to far away and I love that thing use it everyday

@dakotastevens9245 5 жыл бұрын

I fuckin love my MG325. Mines in red and It’s an absolute beast

@KoonTrucking 5 жыл бұрын

They are badass no doubt !

@davidslone7368 5 жыл бұрын

I feel bad for Bill

@MrAnonymousRandom 5 жыл бұрын

I don't know... My supervisor who has both the MG325 and a stubby Air Cat claims that the MG325 is less powerful. What I do not understand is if it's actually that powerful, why would Snap on underrate it by such a large margin? Even that stubby Air Cat I mentioned is rated for 400 ft lbs. Is it to prevent people from going crazy with it and breaking it? To make sure that it doesn't undercut the MG725?

@davidkeller891 2 жыл бұрын

When I got my mg325 I kept telling my snap on dealer how incredible my gun was, I think it had the same specs as the mg 31 or im31 whatever the twin anvil gun was. I told him there's no way, this gun is incredible..Caliper bracket bolts with a 3/8 swivel socket, no problem...after owning it awhile it still surprises me....Lug nuts no problem.....if all snap on impacts were this good, everybody will have one...

@justinberry3453 5 жыл бұрын

Waiting for that stud to ping right off lol

@thefogisgone3662 3 жыл бұрын

What is your air compressor rated at

@prevost8686 4 жыл бұрын

Just wondering how well the gun is holding up after about a year. Do you use it much compared to your cordless guns?

@KoonTrucking 4 жыл бұрын

It doesn’t get nearly the use as the cordless ones but any times we use it on larger jobs. It’s still going strong.

@davidkeller891 2 жыл бұрын

I love my mg325, it's the best gun snap one ever made. it's unstoppable and mine is 5 years old...It's the reason I bought the 725 1/2 inch gun but the 325 holds up better, not saying it's as strong as Papa Bear, but 325h hasn't broke yet and I use it daily. it's so fast it doesn't even struggle...highly recommended......and it weighs nothing,,,,,replaced Im 31

@ruger73mag 5 жыл бұрын

At least bill is getting a work out

@robinpayne278 5 жыл бұрын

Thats really impressive for a 3/8 gun, have you compared it to a 3/8 battery gun?

@KoonTrucking 5 жыл бұрын

Yes we tested the ct761 and the Milwaukee m18 (3/8” and 1/2”) as well as the matco and the kobalt

@toolsonabudget7763 4 жыл бұрын

those threads are prolly super hot ll 400 ft lbs more like 280

@codyrobertson4630 5 жыл бұрын

Snap on must have used a 1 gallon air compressor for their test rating

@KoonTrucking 5 жыл бұрын

Haha they missed this one bad ! I figured 475 or so would be tops !

@mattbrennan8088 5 жыл бұрын

that was a great test of that, I love that. Great little impact. My question is though... can you do that test alternating different studs? In my opinion I think the heat of putting it on and off of the same wheel stud and lug nut might possibly made it easier? Anyone else have a thought on that? Either way its a good little gun, I have the 1/2" version that I use when needed.

@KoonTrucking 5 жыл бұрын

It’s pretty hard just keeping track of what the next setting is. The nut doesn’t get hot as you seen Bill use his fingers to put it on before putting the torque wrench on.

@mattbrennan8088 5 жыл бұрын

ok I hear ya on that. Good video. Keep them coming!

@BDauto86 5 жыл бұрын

Thats insane, just out of curiosity what air pressure was it running at. I have an Astro Nano stubby 3/8, rated for 450max, curious what its max torque is. Good video guys.

@KoonTrucking 5 жыл бұрын

Air line for all air tools is regulated at 90 psi

@davidkeller891 2 жыл бұрын

pretty sure 90 PSI is recommended.....it has more veins to work good with lower air pressure..it seriously is a bad ass gun that lasts for years

@BDauto86 2 жыл бұрын

@@davidkeller891 I don't use much air tools anymore but something like that and the Astro stubby have there place for sure.

@joshrod2941 5 жыл бұрын

I use the cordless 1/2 snapon, any1 recommend switching to air? As far as I kno the battery guns are stronger?

@oscarrodriguez654 5 жыл бұрын

Josh Rod air is stronger, just less convenient

@TheTrailblazer1974 5 жыл бұрын

Curious why you don’t just start at the max torque listed and just work back or forward from there depending on what the impact does

@KoonTrucking 5 жыл бұрын

Well to be honest with you I figured 375-400 max would be all it would do ? And that was the first time we had even put air on it. Needed to have some break in

@PhalanxR 5 жыл бұрын

Might have to give snappy a shot, not really impressed with IR so far

@markcooper9599 5 жыл бұрын

Is the air compressor set to 100psi or higher?

@upnorth5465 4 жыл бұрын

I always regulate air pressure to 90 psi... Said no shop ever. Our shop air is set at 170psi unregulated. Turns impacts into monsters.

@lynnshaw1991 5 жыл бұрын

what is the torque spec for those lug nuts?

@dieseldoctor9294 5 жыл бұрын

450 to 550ft lbs per the oem, 450ft lbs is kind of industry standard on 33mm lug nuts.

@lynnshaw1991 5 жыл бұрын

that is a lot more than I expected. Thanks for the reply.

@evenhand7743 5 жыл бұрын

how much air pressure are you ruining

@KoonTrucking 5 жыл бұрын

90 psi

@RingZero 5 жыл бұрын

How much your pressure setting at the tool, I bet it’s over 125 psi

@KoonTrucking 5 жыл бұрын

No it’s regulated at 90 psi

@mygoat1 5 жыл бұрын

He said 90 fool

@RingZero 5 жыл бұрын

There’s a video someone weighed the hammers to be lighter than a HF gun, just saying

@vanrobinett3309 5 жыл бұрын

I don’t know if any one has told you but that adapter reduces torque 😂

@derekgaul1398 5 жыл бұрын

Why would snap on under rate the impact by that much?

@dchawk81 3 жыл бұрын

Because they're not testing on super hot fasteners.

@rmartinjr83 5 жыл бұрын

What size air line

@KoonTrucking 5 жыл бұрын

3/8” is what we use on everything other than the 1” and 3/4” gun we use 1/2” line

@s_k_fishing7313 5 жыл бұрын

I don't get how it can break 600 ft-Lb. mine cant break 300ft-lb to save its life. even my 1/2in from snap on struggles on trucks everyday

@dchawk81 3 жыл бұрын

Heat. By the time they got to the bigger numbers it was like putting a torch on it.

@ianrob900 4 жыл бұрын

What air pressure are you running in the shop

@KoonTrucking 4 жыл бұрын

90 psi

@ianrob900 4 жыл бұрын

God bless 90 psi and she run that good I love my mg325 she a bad girl

@upnorth5465 4 жыл бұрын

That's crazy! Our air kicks on at 120 and shuts off at 170 with no regulator. Haven't destroyed anything yet.

@TheTrailblazer1974 5 жыл бұрын

Pop one of the other bolts loose and torque to 410 bet it won’t move a cold nut

@KoonTrucking 5 жыл бұрын

I will bet it will. I know it will do 415 on a cold lugnut without a doubt

@roberthoovan4130 5 жыл бұрын

U try IR w7152 yet

@KoonTrucking 5 жыл бұрын

I own the IR it’s about a year and a half old. It won’t do what this one will for sure. I’m probably gonna be getting the MG325

@KoonTrucking 5 жыл бұрын

No I haven’t. I had two batteries brand new and gave them to Hamilton. Got them in a box of stuff I purchased from a supplier of overstock items he had for sale.

@Azaron83 5 жыл бұрын

Are you sure your not stretching the bolt? Find a new nut and bolt and go straight to 500. And see how it does. I know this is a bad gun but I don't think it's 600lbs powerful. Also what psi was your air and was that a 1/2 or 3/8 hose?

@KoonTrucking 5 жыл бұрын

3/8” hose 90 psi Not stretching the bolt it’s a lug bolt for a semi 600 ft lbs not a problem. That’s why they make 1” impacts with the breakaway torque they do designed to remove these lugs.

@Azaron83 5 жыл бұрын

@@KoonTrucking I have had to replace nuts on the front of bulldozers that are torqued to 450. And have to use a 1" hose to a 140 psi at minimum scroll type compressor attached to a 1" impact. And sometimes still have to heat the nuts. Granted a lug nut with washer and comparing it to a high strength nut with a locking washer is different. I think the results could be different just because of that washer. But man either way its impressive and I'm thankful for your team to take time to demonstrate these tests. I like your videos and appreciate your dedication. 😎

@KoonTrucking 5 жыл бұрын

V S well you have to take dirt into consideration also plus lugnuts get removed much more frequently I’m sure (I know they do at our shop because our guys won’t take the time to check tires, they know they are bad when they flip off the side of the rim after blowing).

@philldownes8685 3 жыл бұрын

you tighten it to 600 ft lbs yes 100 agree, but it dont take 600ft lbs to undo it. around 400 ft pounds will undo it easy. maybe even less...... what you need to do is get a left handed thread and tighten that up as much as you can with the impact gun and then see what torque the wrench moves the nut at without the stupid jerking the torque wrench............... forward pressure on that gun wont go anywhere near 400.......... and jerking the torque wrench is not the correct way to use a torque wrench, its lying doing it like that. you do it smooth or can be miles off with correct torque...... but undoing a nut is never going to take the amount of ft lbs is does to tighten it.... like comparing wind v water

@carpetcleaningprofessor 5 жыл бұрын

Boy my wife hates me watching your videos it takes a real hurting on my wallet. If you would like I can make you a socket that is 3/8 that will have no play just message me.

@KoonTrucking 5 жыл бұрын

Haha I hope we are done testing out impacts for a while especially after the Snap On MG325 video ! That one was rough !! Tell her to go watch “Angry Wife VS Snap On Tools” that way she can see the woman’s point of view on tool buying ! My wife explains it very well

@carpetcleaningprofessor 5 жыл бұрын

@@KoonTrucking the sad thing is man I'm a carpet cleaner not a mechanic anymore. But I still work on things for charity work so it all works out in the end.