Thank you Jesse, You know, I was thinking about that today, good idea from you, as soon as possible I will to do it. Luiz

I thank you for the kind words, so really the Sherline little machines is like a theraphy, I know you would love as well. Luiz.

3 yrs late. But thread milling is awesome use to work in a shop did it all the time. Works very well in stainless.

I'm glad know you like my videos, thank you so much

Thank you for your comment buddy!

Hi Scott, thank you, So I love these small Sherline machine. I've made some modifications in order to get best results but in general they works very well to make small metal parts in home. Look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are most welcome!

Robert, thank you for the birthday wishes, I'm getting an old man lol I think that the music inspires us as we work. All the best to you.

Thank you for the kind comment, Yes, all my micro tools is made by myself either to the mini lathe or for the mill machine, in my Facebook page you will see more about that in my albums. If I can do it, you can do it also, have no secrets, just patience.

@@tryally Patience is the secret.

phucnguyen CNC Thank you for your comment, I'm glad you liked it. Luiz

Thank you for watching, take a look at here, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome.

Isso mesmo. um gabarito para que eu possa retrabalhar a coroa com exatidão. Depois vou postar o resultado.

Thank you Smith. In the truth, and in this specific case don't need to set zero, it is a simple program made using the Mach3 wizard, was a good idea I had and works very well, I make separated wizard programs, and after I save one, two or three program together in single G code program. it is simple and fast when the machine have not reference home, so it is great to complex program by a really very simple way. Look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome! (I apologise, my english is poor)

Hi Jack, most of the time I do small parts, but you are right the Y axis leaves something to be desired on some types of work. Jack, maybe you can participate of our Sherline group on Facebook, I think you will enjoy the group, has good friends, many ideas and some cool projects too. Take a look at here: Sherline Lathe & Mill Group facebook.com/groups/975235319239533 Hope also see you there. Regards Luiz

Hi Jack, I written this gcode by hand. Sometimes I do use a few helper programs for curves and such. Thanks for your comment.

Oi Fabiano, infelismente não tem mais o antigo representante, porem de tempos em tempos sempre tem alguém que trás dos EUA e coloca a venda, se você usar Facebook me add lá que sempre fico sabendo quem tem pra venda e te dou um alô. Esse é o caminho para minha página e tem também muito mais coisas feitas com Sherline pra você ver e curtir: facebook.com/tryallytech?fref=ts Abraços. Luiz

I use the Mach3 licencied for practically all things on my Sherline, and like I show in these vídeo the program is made using Wizard on Mach3.

Hi Tzampini, this cutter tool is made by myself, I will post pictures in big close in my facebook using special lens, is not so complicated to make them. Thanks for the question.

Thank you, Luiz!

Anthony look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are most welcome!

Your welcome my friend.

Hi Moonie Dizzel, yes it is made by my self, works very well, I'm starting my website with a precious quick change tool post for mini late, look at this, tryally.com/

Luiz Ally I looked at your website. Wow that’s a nice tool post. I think I may get one. Can you email me what you have some vises? My email is goldspilo@yahoo.com. Thank you Luiz happy machining.

Hello William, So I like these machine, I have using it for long time in my house to develop my things in a lot of material types, like steel, 7075 aluminum alloy, titanium, iron, brass etc.. Some parts inevitably wear out after so much high performance, is not an industrial machine, but I think have regarding cost-benefit good results. And the maintenance is not so expensive. As always, I recommend a good lubrication for a useful with long lifetime. An important info to all user like you is these machines are for small and mid parts but any material. Look here, more about these machine and my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome!

Hi Gabriel, Yes I use the P/N 4335 10,000 RPM Pulley Set, this makes Sherline mill works with better result, good finish etc.. Luiz

Oi Manasses, bom saber disso, vou tentar também essa mistura. Sim praticamente todas as ferramentas são feitas por mim mesmo.

Hi Philipp, I don't know if I understood your question correctly, but all my tool holders is made in own machine, so the centering is very good. For home user with cheap machine this thread system on tool holders until it works well making a great work.

@@tryally ok! Yes you understood me correctly. Thanks for your message.

@@MrPhilxxxxx I also thank you. Take a look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome! Regards from Brazil. Luiz

I love the 2010 model, it is my favorite mill, and yes, all cnc now, lathes and mills, I'm using Sherline standard drive box, they work very well for me.

Reponde no outro comentário seu ok

Hi, yes, all my Sherline mill works with standard headstock but with 10,000 RPM Pulley Set

@@tryally and the bearing of the std headstock have no issues at such high RPM?

@@Dimprecator I have been working for years with standard bearings and 10K rpm, I still had no problem until now. Thank you for your question and comment.

@@tryally Thank you so much for your answer, I am in the process to buy a 5800 cnc ready...for like 2 weeks , the french dealers is really slow... I really want to start working asap . Thanks for your answers and congrats for your job quality

@@Dimprecator I'm sure you will love this mill machine, Take a look at my page on Facebook, I show many cool things there Has also the Sherline lathe and mill group, I'm a administer, good friends and many projects too. facebook.com/tryallytech?fref=ts web.facebook.com/groups/975235319239533 You are welcome, Best regards from Brazil Luiz

I have heard of Fusion 360 and some friends says the program is very nice and practical.

you should definately take a loook at it, you can generate intelligent toolpaths which will safe you tools and it is also completely free (if you dont make 100k dollars a year)

Thank you for watching my videos, I'm glad you enjoy it.

I'm using up to 10,000 Rpm in this video with P/N 4335 10k RPM Pulley Set. Thank you for your question.

Luiz Ally ty for your response

Hi, In this video I'm cutting 1 mm per pass and with 10K rpm. Thanks for watching.

@@tryally thanks sir for ur reply. Wat size of nema motor u got and how much torque. I'm planning to buy either proxxon mf 70 or sherline 5400

maximum how much depth per pass we can give in brass?

@@rwagh So depends on some factors, rpm, tools material, feed rate etc.. But in general you can remove a deal of material considering the size of machine, in Brass per example sometimes I removed into 2 mm per step, but normally is 0.50 to 1 mm. I particularly like to work with 10K rpm in order to get higher metal removal as aluminum or brass

@@tryally ok got it. By cnc kit can we increase the rpm?