Today I solve my Garmin GPS power cord problems

Рет қаралды 26,194

Күн бұрын

I solve my Garmin GPS power cord problems
Dino’s Tinker Shed, S1-Ep28. GARMIN NUVI power cord problems
In this episode I will walk you through how I modified a Garmin Power cable to work on my DR650 without going into Sync mode. This was an issue I had been dealing with for years with my snowmobiles and lately my DR650 which both use a USB plug wired directly to the 12 volt power system of the vehicle instead of using the “cigarette” style power plug supplied with the GPS.
This Mod seems to work for me but please let me know if you have other ways to stop this annoying issue with the sync mode.
TIME CODE CHAPTERS:
00:00- Cold opening
00:55- Intro
01:14- Overview of the issue
02:01-Why I use a Garmin NUVI in the first place
05:19- Review of cable and project
06:56- I mess up the first attempt
08-30- Example of a journeyman’s splice
10:05-Soldering the splice example
11:24- Soldering the real wires
12:00- Shrink tube
12:27- Take two
12:57- Testing
13:26- Summary

Пікірлер: 37

@lawsongagnet227 Жыл бұрын

I was able to use a small razor knife and strip back the outer casing and just clip the green and white cables. It works and is much easier.

@Jestey6 Жыл бұрын

Hi Deno and J.D. As an update, I have a Garmin dash cam 66w, works well. It was supplied with the 12v converter to 5v USB lead and plug, and what appears to be a standard USB lead, which is for connecting to a PC, to download videos and for charging. I formed the impression, that if I used this lead to connect to a USB socket, the device would switch into PC mode. However I thought I should check, so I connected the ‘USB’ lead to a charger and it worked fine🤗. I raised the question with Garmin tech support, and my requirement for a ‘short’ lead, and they are sending me one FOC. I consider this to be excellent service. So as far as my dash cam is concerned, it appears that it will work with a USB cable plugged into a USB socket, and anybody else with a 66w should also be OK. Thanks for your help. Cheers Noel

@todgak2070 Ай бұрын

I have a Garmin Montana 610 that I use on my motorcycle. In the settings I set it to start in "Spanner" mode instead of "Serial" mode. Spanner allows it to run in GPS normal mode off any USB cable rather than looking for a PC connection. I accidently reset it and noticed it started up in serial mode on my bike, and I could not get it to go into the GPS screens. I ended up here looking for a solution, but after tinkering with my settings I found the startup mode. I knew this setting but forgot it as I have not ridden my bike in a couple of years. Be careful if you click Reset as it will default to Serial mode.

@DinosTinkerShed Ай бұрын

Thank you for that tidbit, it is annoying how it wants to find a PC. I'll do just that Dino

@enzaricciardi9170 8 ай бұрын

Thank you soooooooooooo much. It worked. So glad I didn't throw away my old GPS. It now works :) :) :)

@DinosTinkerShed 8 ай бұрын

Thanks great to hear. Dion

@SuckTheseStandards 5 ай бұрын

Thanks for the very informative video. I know you can get a really cheap charge only cable somewhere and you can definitely make one as you have shown. I've created my own charge cables in the past but those thin wires are so delicate! Thanks for that tip on the white and green cable as a loopback. I wonder if this is where some sellers are claiming that they have put in a special chip (or just a resistor) to block the data port on either ends of the cable so that it sense no data and only charging is necessary. The soldering technique you showed is pretty nice!

@MalJ-eb7nv 2 жыл бұрын

Thanks Dino. I use a Garmin Zumo 660 and use a plug in USB charger on my DR 650. No issues - (maybe internally wired differently). Your information is very useful however as people can use their Garmin Nuvi from their car on their motorcycle. The Garmin Zumo is quite expensive relative to the Nuvi - your info gives riders options to use an existing sat nav and not need to purchase a second one for the motorcycle. Good!

@DinosTinkerShed 2 жыл бұрын

Thank you for the feedback, the nuvi is maybe not the best option but as you point out it is an option many people already have. Thanks again for the comment I always enjoy the feedback you give. Dino

@Rachaellittlephotography 2 жыл бұрын

Very cool! We have an electric guitar to solder and it's neat to see how it's done.

@nb3596 Жыл бұрын

Thanks Dino for this very helpful video. Saved your viewers about $19 USD

@DinosTinkerShed Жыл бұрын

Glad I could help Dino

@j.d.3269 2 жыл бұрын

For the old Garmin GPS, the trick is to add a resistor about 17.3k between Pin4 and Pin5 (ground).

@DinosTinkerShed 2 жыл бұрын

Thanks for the information. It should help myself and others who have this issue. Dino

@Jestey6 Жыл бұрын

Hi J.D. I have a Garmin dash cam in my car and I think the same thing happens to them when you try to connect it to the USB socket in the car. You mention 17.3K between pins 4 and 5. I’m wondering which wires connect to pin four and five in a USB cable. Can you help please? Many thanks Noel

@j.d.3269 Жыл бұрын

@@Jestey6 Your cable should have a wire for Pin5 (ground), but no wire for Pin4. You need to connect the resistor to the Pin4 of your cable's mini USB connector upload.wikimedia.org/wikipedia/commons/e/ec/USB_Mini-B_receptacle.svg

@apeel2008 11 ай бұрын

I would assume that using a Data-Block USB Adapter would be just as effective and much easier to do. The data-blocker adapter effectively disables / disconnects the data wires. Have you tried these as an alternative?

@GoProDodge 2 жыл бұрын

Great info, Hopefully my ‘new to me’ zumo doesn’t do that, but if it does let’s mod a cable for my sled. Great video!

@DinosTinkerShed 2 жыл бұрын

Glad you enjoyed it BRPete. Zumo's are nice for sure, and should be a nice GPS

@billhamilton2366 2 жыл бұрын

Merry Christmas Dino…..have you tried connecting all of your devices through SAE plugs? One style of plug. Very rugged and reliable and able to be connected to multiple devices through one plug. When I’m updating my electrical system I plan to install 3 of them on my bike. One for the tank bag, one for devices like GPS and one for a tire pump. I’m going to add a proper bus bar to keep things organized. On another note. I’m going to be making a mount for aux driving lights. A copy of an existing overpriced bracket, and sell them cheap to those interested. I also have a 7 inch headlamp bucket and will swap out the original headlight for the bucket if the LED lamp I purchased doesn’t work out for me. Some of the things Suzuki does make me scratch my head. I’m always wanting to make my bikes unique and safer. Have a great week-end. Life in THE 60s was a lot better than life in MY 60s/70s

@DinosTinkerShed 2 жыл бұрын

Hi Bill, great comment and a merry Christmas to you as well. I do have two SAE plugs on my bike, one for a trickle charger and the other for the rear box. you are correct about the robustness. I actually have the cyclops bulb in my DR and compared to stock I find it to be an improvement for sure. I have a video planned to compare the two as Karl wants one in his bike as well. I have had other cheaper LED lights in my snowmobiles and although they did through a lot more light as the cyclops does, they tended not to last in the hi vibration environment of the sleds. SO far the cyclops is working very well for me. Interesting about the aux light bracket would like to see a picture once you have it done. Dino

@Rufinoman Жыл бұрын

Very good video. However, my Garmin 67 keeps telling me "The attached cable cannot currently charge your device." even with a Garmin cigarette lighter cable connected to the female 12v on my bike. Have you ever come across that message? Cheers.

@DinosTinkerShed Жыл бұрын

Thank you for the great question, unfortunately I have not seen this error before. I wish I could help more 😞. Dino

@jpbmatra8157 2 жыл бұрын

Hello, thank you very much for this video. I have the same issue but I wish relocate the usb port outsider the gps. I wish sold a flex on the motherboard or other. The gps will take place in the dashboard and can't be unmount mable in the future. I just wish can disconnect bc30 cable for do the update. Actualy nothing works. My garmin goes in pc mode if I use an usb extension. My garmin is a 2597 LMT. Thank you.

@DinosTinkerShed 2 жыл бұрын

Thanks for the comment. Please let me know how you make out. I have had a few others tell me the fix does not work on their model. Dino

@Jestey6 Жыл бұрын

Hi Deno and J.D In the USB cable there are only 4 wires red, white, green, and black. As described by Dino. Is it possible to connect a 17.3k resistor between two of the wires, and if so which, I suspect it will be between the red and the black, to drop the 5v slightly and this will prevent the device going into sync mode. In addition will this work with a Garmin 66W dash cam, I suspect it will. Many thanks Noel

@DinosTinkerShed Жыл бұрын

Hmmm, I do not have an answer for your question. I have a friend that I have pizza with who is much better versed in electronics than me so Ill ask him. Dino

@Jestey6 Жыл бұрын

@@DinosTinkerShed Thanks for the instant reply, would appreciate it if you could. Cheers Noel

@Scootphoria Жыл бұрын

@davidovitchdevlinski1000 He connected the green to white on the GPS side of the cable. Green/White on the power side are just cut. If you cut the whole cable as he did, then reconnect the red/red and black/black so they are back to original.

@Alwhite1929 Жыл бұрын

Can you just open the sheathing slightly and clip a section out of the green and white?

@DinosTinkerShed Жыл бұрын

I tried that and it did not seem to work for me. I find the units are really fussy for some reason and even between models. Dino

@michaelsweeney9282 2 жыл бұрын

I have an older Nuvi and I made the fix and plugged in and the computer icon came up. But if you unplug the usb and wait for the computer icon to disappear the quickly plug back in ,the maps load

@DinosTinkerShed 2 жыл бұрын

Very odd, I think I mentioned in the video that my older Nuvi still went into sink mode even after the mod. I'll have to try your trick to see if that works. Thank you for the information. Dino

@mrmr9767 2 жыл бұрын

Hi i have a garmin navigator v1 . i use a usb cable which charges a cycle light this only has two cables inside and works ok as long as connection to sat nav is the same.

@DinosTinkerShed 2 жыл бұрын

Thank you for the feedback. It's good to know. I have seem these online as well, much easier than my route for sure. Thanks for taking the time to post. Dino

@billhamilton2366 2 жыл бұрын

I have an older computer that I used to only charge devices from a USB port. I simply disabled the data function in the USB port and Ta daaa.(short for Da ta da Daaa🎶)

@DinosTinkerShed 2 жыл бұрын

Interesting, That's what I thought would happen with the NUVI but it seemed to still drop into sync mode until I joined the data lines. Mine may just be an older unit or something weird with Garmin. Dino