Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ia/1AAXX00122
This video shows you how to install a rear axle bearing on your 1997-2003 Ford F-150. If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. For solid rear axles, you'll need to replace the axle seal too.
This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150
Tools you will need:
• Pry Bar 1aau.to/tEk/1AXAA00020
• 10mm Wrench 1aau.to/tKR/1AXAA00010
• 10mm Socket 1aau.to/taNB/1AXAA00017
• 13mm Socket 1aau.to/tbnn/1AXAA00015
• 21mm Socket 1aau.to/t5u/1AXAA00043
• Bearing Puller
• Bearing Race and Seal Driver 1aau.to/oq/1AXAA00038
• Slide Hammer
• 1/2 Inch Air Impact Gun 1aau.to/tmZ/1AXAA00252
• 3/8 Inch Air Impact Gun
• 3/8 Inch Drive Ratchet 1aau.to/tbnn/1AXAA00015
• Torque Wrench 1aau.to/tabo/1AXAA00044
• 3/8 Inch Wrench
• Anti-Seize Grease
• Brake Parts Cleaner
• Gear Oil
• Liquid Thread Locker
• Petroleum Jelly
• sanding disc
• Hammer 1aau.to/tHb/1AXAA00091
• Magnet - Extendable
• Wire Brush 1aau.to/tnG/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.