I forgot to mention two things 1. For safety Reasons, You must be grounded in an antistatic work environment. 2. Remove the Battery before the surgery.
Пікірлер: 37
@azucarplatea2 ай бұрын
I cannot thank you enough for such a thorough explanation. My Mavic Zoom is now up and running. I appreciate the patience and detailed, informative and entertaining comments, camera angles and generosity to share your knowledge with us.
@TECHNOLOGYTIPS1012 ай бұрын
You are very welcome, and I appreciate your feedback.
@ZeisslermusicАй бұрын
Very Nice camera work. Thanks 🇩🇰
@TECHNOLOGYTIPS101Ай бұрын
Many thanks for your feedback.
@luciferbox55772 жыл бұрын
This was some very complicated surgery Khalid. Absolutely fascinating to watch. For me, my favorite videos are the ones where you repair/replace something and this has been the best so far. Thank you.
@TECHNOLOGYTIPS1012 жыл бұрын
Thanks a lot, I appreciate the encouragement!
@KTHKUHNKK Жыл бұрын
Hello again my friend. I figured I just pop over to your channel scroll up through some videos tap on one and wow you fix drones. Excuse me I have to get back to your movie now Keith Kuhn
@TECHNOLOGYTIPS101 Жыл бұрын
Thank you for your support!
@andrewallan68025 ай бұрын
Thank you so much for this, such great detail and advice. I like the two camera setup. I don't know if anyone has pointed it out, or whether your aircraft is different but when you start off unscrewing the base plate the screws are hex screws, not star-shaped (Torx) ones. You can use a Torx driver on hex screws but it eventually wears down the screw. The ones holding the board on are Phillips, the only screw on mine that's a Torx is the one holding the propeller arm on. But hey, thank you, I would never have attempted this without your video!
@TECHNOLOGYTIPS1015 ай бұрын
You are very welcome, and thank you for pointing that out. I didn't know they come with different types of screws. Also I totally agree about using the correct type of screw driver for every type of screws.
@andrewallan68025 ай бұрын
@@TECHNOLOGYTIPS101 thank you again. I've just fitted a new rear arm, put it back together and there don't seem to be any screws or parts left over! It's powered on and everything seems to be working. Test flight tomorrow :-)
@DaveOsborne-fk5dr Жыл бұрын
Wow!!! Thank you so much for your incredible video. Crashed drone, could not afford to have it fixed, bought the new right rear arm, followed your instructions to the letter, and just like new, my drone is up and running!!!!
@TECHNOLOGYTIPS101 Жыл бұрын
Great to hear!
@KTHKUHNKK Жыл бұрын
I am at the 4110 mark With you. I have to take a breather I'm getting heart palpitations. LOL YOU'RE A HECK OF A GUY TO TACKLE THAT JOB. Keith
@TECHNOLOGYTIPS101 Жыл бұрын
Thank you, it sure is challenging lol
@KTHKUHNKK Жыл бұрын
You're doing excellent work doctor. Keith
@TECHNOLOGYTIPS101 Жыл бұрын
Thank You!!
@KTHKUHNKK Жыл бұрын
@@TECHNOLOGYTIPS101 Not a problem doctor. You're a modest humble good man. And one heck of a surgeon. Keith in Ohio
@TECHNOLOGYTIPS101 Жыл бұрын
@@KTHKUHNKK That is very kind of you, I really appreciate that. It takes a kind man, to recognize a kind man!!
@KTHKUHNKK Жыл бұрын
@@TECHNOLOGYTIPS101 I guess you and I are KIND. Of special. But seriously you do some awesome work my friend. Keith
@niceclickstudio95546 ай бұрын
Thanks!
@TECHNOLOGYTIPS1016 ай бұрын
Thank you very much for your generous donation!!!
@eprohoda2 жыл бұрын
hiya!!youu created best done.see u around! 👋
@TECHNOLOGYTIPS1012 жыл бұрын
Thank You!
@KTHKUHNKK Жыл бұрын
When people buy these drones they have no idea about the technology and precision it is put into these things. It's absolutely incredible. I wonder if robots assemble these from the factory ? Keith
@TECHNOLOGYTIPS101 Жыл бұрын
It's partially robots and partially human workers. They have a KZfaq video showing their assembly line.
@KTHKUHNKK Жыл бұрын
@@TECHNOLOGYTIPS101 I would love to see that Video. Will you send me the link. Keith
@TECHNOLOGYTIPS101 Жыл бұрын
@@KTHKUHNKK Sure, here is the link kzfaq.info/get/bejne/mNubmaSVrpzZaYU.html
@KTHKUHNKK Жыл бұрын
I'm really surprised you didn't put a dab of loctite on the screws. Keith
@TECHNOLOGYTIPS101 Жыл бұрын
The screws already had the previous lock-tite stuck on them because they wouldn't go in smoothly, but I should have refreshed it anyways.
@Bitchesgivehigh5s Жыл бұрын
Good stuff man! Still enjoy watching your stuff. Do you plan on getting an of their new drones? I got the Mini 2 because of you. I now own the Avata and DJI FPV. So its your fault why im always broke! :D
@TECHNOLOGYTIPS101 Жыл бұрын
LOL, no kidding they are rather expensive. I should be getting one in the next month or two. The reason I didn't buy one is that they haven't actually added a powerful Optical Zoom on their new Mavic models. The Mavic 3 Zoom is mostly digital with very little optical power. However, if you buy the expensive DJI MATRICE 30 it comes with a 15X Optical zoom.
@KTHKUHNKK Жыл бұрын
Were you happy with the way it sounded once you fired it up on your desk , it sounded a bit funny Keith
@TECHNOLOGYTIPS101 Жыл бұрын
Yep, that was the sound of a successful surgery lol
@KTHKUHNKK Жыл бұрын
@@TECHNOLOGYTIPS101 Great I have had my share of drone mishaps and crashes I know what it's all about. Keith