uAvionix Tail Beacon Install | Super Cub
Рет қаралды 2,798
2 жыл бұрынAnnual Time for the airplanes and we are FINALLY Getting around to doing the ADSB update. Just as my online research showed. I had to drill out the tail position light housing to create enough clearance for the new Tail Beacon.
#supercub #uAvionix #ADSB
SUBSCRIBE
/ @jimbilton
@Lt_Tragg Жыл бұрын
An alternative install perhaps on a rag and tube plane would be to mount the beacon inside the tail end of the fuselage - fab up a bracket and adel clamp to a tube and have kept the original tail light and not had all that fuss to make the beacon fit in its place.
@thomasbauer5351 Күн бұрын
What did you do with a ground wire
@tac0majas0n 2 жыл бұрын
Hey Jim, can you elaborate on your maintenance log book entries pertaining to this install?
@13634landing 2 жыл бұрын
Hi Jim, Nice video, thanks for posting. Just curious on how you grounded the TB since you had only a single power line to the original? Anything special? Cheers
@JimBilton 2 жыл бұрын
Hey thanks! I grounded to the mounting screw. When I put the beacon in I brought the ground wire back out through the side and wrapped it around the mounting screw sandwiched between the mounting plate and the rudder. Hope that helps. Cheers
@13634landing 2 жыл бұрын
@@JimBilton Thanks for taking the time to answer my question. That helps a lot! Many of the install videos don’t address the basic ground wire. UAvionics recommended running a ground all the way back to the battery, but that seemed a little excessive. But who am I to question that since I am not an A&P… Cheers
@John170B 2 жыл бұрын
Will this tail beacon work for a Cessna 150
@JimBilton 2 жыл бұрын
Yes it will.
Infinity Circus
Рет қаралды 3,7 МЛН
Kirill Multitool
Рет қаралды 63 МЛН
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 226 М.