The last piece to the build arrived! Even tho it isnt what i wanted we will have to make due with what we have!
Пікірлер: 68
@khalidmohammed64282 жыл бұрын
Your next video should be… “I fly down to Atlanta to help my fellow New Jersian with his frank swap” 😂
@k20ee964 жыл бұрын
Just finished the whole series on the engine build, really helpful and detailed, great job
@kevinharris-charles40665 жыл бұрын
Great work. I'm excited for the motor install and first start up.
@chrisC53393 жыл бұрын
Good series, I already know about engine building but I view these various videos to learn about different engine types.
@chrisC53393 жыл бұрын
I use a block of wood placed between the flywheel ring teeth and the transmission housing bolt, works great, no risk to anything as the wood absorbs the tension, and the shards of wood that come off are easily cleaned off.
@brucelee10673 жыл бұрын
Bro women are like motors when the start smoking u replace them 💪🏻 great content brada
@litoloco4fish4 жыл бұрын
Its sounds like that shop truly dont give a shit...that sucks man they giving you the run around...assholes...you did a great job.. you know it's great your papa is around, I just lost my papa and when used to work on my hondas all night he was always there by my side...its nice to see that bro..👍🏼👍🏼 many blessings
@thexflexclan4 жыл бұрын
Nice video bro I’ve watching you how you build that motor and the effort you putting it nice 👍 I’m in jersey as well
@6speedRWD4 жыл бұрын
Just wanted to say thank you for filming this build. I know it was not easy but this is great content! Hope you continue with more detailed builds.
@litoloco4fish4 жыл бұрын
Great stuff 👍🏼
@dominicfreitas98565 жыл бұрын
Awesome job
@georgebonney905 жыл бұрын
Great series thank u sir
@gueorguimurdock24284 жыл бұрын
Awesome video
@15negro885 жыл бұрын
Hey serge dont feel bad I got a 6 pock ACT clutch kit with a findanza flywheel, and the clutch pedal is not as bad ,not soft not hard u know, good luck with everything great series this year big fan
@15negro885 жыл бұрын
Pucks
@jenningscheng1735 жыл бұрын
Damn brotha, i feel ur pain. Its happened to me multiple times. Hopefully whoever it is that did u dirty will hook u up next time. I run ACT 6puk on mine and i love it but i understand we all got our like and dislikes. Keep up the awesome content.
@AllMotorGarage9075 жыл бұрын
J. Cheng act 6 puck unsprung all day 😎
@wbrito86175 жыл бұрын
They knew who you are. They was trying to hold you back on your project. I would of asked for the direct factory number. But anyways excellent work!
@watchere4 жыл бұрын
So have you driven on the clutch yet? How were your street impressions? I ended up buying a puck clutch since it was a good deal.. but still going back and forth if i should get a full disk. I am also going to be running a 7.7 lb flywheel.. Afraid its going to be too harsh. Thanks for the advice!
@obgbeto5 жыл бұрын
Love the videos man keep up the good work! Any chance you’re gonna upgrade your intake manifold? You don’t feel like it’s holding you back a few ponies?
@SERGMOTIVEGARAGE5 жыл бұрын
this intake setup is killing my power lol unfortunately the setup i need to run is $$$$ so i just run this until im ready to go all out
@kevinshawntrolitzsch21005 жыл бұрын
Where did you get your engine from?? Internet? Scrap yard? I want to do a built myself (k24) on my Civic. Inspired me so much... Can you give some tips where I can get all the stuff to get it swap and fully functional.
@amaterasu88294 жыл бұрын
Hey. If you could leave a parts list if everything you got in this build series, I would much appreciate it. I plan on following it entirely
@kadarkhanpathan66945 жыл бұрын
Canmakid disal Eangin for Honda overhaul vidyo piles
@sroc27664 жыл бұрын
Bro ur videos help me thanks
@rheabryan71285 жыл бұрын
In search of a clutch kit for my k24a2..but a lot of brands (ACT, clutch masters, and Competition) doesn’t say fit k24a2...but it says it fit k20a2...soo do I buy a clutch kit for a k20a2 and would it fit my k24a2??
@jamaicanchinc5 жыл бұрын
Hey bro what's pulleys are you running? Having clearance issues with the crv post mount bracket.
@marlonfb6_raiden6623 жыл бұрын
What kind of torque wrench is tht ?
@icy63463 жыл бұрын
What pilot bushing if your using a k20 trans??
@itsreallytheo5 жыл бұрын
After some 4bangers production, b is for build, zosh, speed academy, vt Bobby finally tuning into sergmotive garage for the night
@jlope89915 жыл бұрын
What about boosted boiz
@itsreallytheo5 жыл бұрын
Them too
@wilmerisme2 жыл бұрын
Fx300 still sprung? cause when I went to check still got springs in them
@Pedro.fg22 жыл бұрын
Can you drop the link for the arp clutch bolts I can’t find anything about them anywhere besides for b and d series
@wickedsatan12 жыл бұрын
Which belt? Is crank from k20 or k24?
@meorge93595 жыл бұрын
Serg, where in jersey do you live? What town?
@vtecsk8r5 жыл бұрын
That clutch is used on pretty much every single build lht performance builds on the f20c engines kseries etc. And they have nothing but good things to say about it.!!
@SERGMOTIVEGARAGE5 жыл бұрын
they use the fx300 which is the one i love, the fx400 is for builds that are making a bit more torque. Ive been driving it for a while now and its not that bad.
@vtecsk8r5 жыл бұрын
@@SERGMOTIVEGARAGE I thought it was the 400 but hopefully you'll get used to it
@deieznuts6 ай бұрын
I’ve had bad experience with tristate also. I went all the way up there from NM to say where’s my shit?
@AllMotorGarage9075 жыл бұрын
idk what everyone’s crying about , I only rock ACT 6puck unsprung clutches on my hatches , not worried about pedal feel
@papoportillo10195 жыл бұрын
Can you say the parts for the engine cost ???
@tappy812 жыл бұрын
That damper should be 181ft lbs torqued to spec. Not 111lbs.
@richardtpgusa72363 жыл бұрын
Let me know if the thrush stays intact...
@JuanMunoz-by6tb3 жыл бұрын
What k20 head and what k24 block?
@bryanfigueroa34 жыл бұрын
How is it holding up?
@noblewon35073 жыл бұрын
So normally you go with clutch master but wanted a disk clutch stage 3 , that's messed up i can see the disappointment in your face. But how did the pucked clutch do?
@hikmetal7485 Жыл бұрын
Kral usta Türkiye Malatya Hikmet Honda
@theoneofone29924 жыл бұрын
Hey man what half shaft are you using????
@SERGMOTIVEGARAGE4 жыл бұрын
oem
@samhan70484 жыл бұрын
SERGMOTIVE GARAGE how much hp beating can the oem half shaft take?
@wendellgreenidge33623 жыл бұрын
Nice build, I know this is old
@BoostedK20Ek95 жыл бұрын
Just wondering why didnt u install a twin disk?
@SERGMOTIVEGARAGE5 жыл бұрын
thats way over kill for my build lol
@BoostedK20Ek95 жыл бұрын
I saw the video again and now i understand now why
@jona_ej23305 жыл бұрын
Im still waiting for hybrid Racing, 2 months in april 8... Shipping to Spain but 2 months???
@ramoncollazo12215 жыл бұрын
Jona_ej2 buddy hybrid is the worst on shipping their parts on time ,always with the excuses ,my last order i had to wait 3 months and im in u.s.a
@jona_ej23305 жыл бұрын
@@ramoncollazo1221 Well it's a shame they do not stock anything? I thought it was a "big" company ... Thanks for your answer!
@SantiagoHernandez-me7mq4 жыл бұрын
You better do that damper again cause it takes alot more then what you did.
@tappy812 жыл бұрын
181lbs not 111lbs lol but hes good at these builds. Nobody's perfect
@ivtec8455 жыл бұрын
6 pucks are a junk design they always chip off the discs 😣
@gamerlife44125 жыл бұрын
Damn that really sucks bro... putting something in your build you dont even want.