vespa SIP ROAD 3 | mount, testRIDE & SOUNDcheck | FMP-Solid PASSion |

  Рет қаралды 32,282

FREAKMOPED Vespa Tuning | FMP - SolidPaSSion |

FREAKMOPED Vespa Tuning | FMP - SolidPaSSion |

4 жыл бұрын

testride M244 quattrini, mounting & SOUND check, & 50-100kmh compared to polinibox, which one will be faster?
sound is fine, hope it stays like that, as we know that the v2 gets pretty loud (and annoying...)
more pictures of the sr3:
• NEW sip road 3.0 BOX e...
CONCLUSIONs vs polinibox: same same but different! same speed on the road (forget the 0,7s, its not that accurate)
A bit less torque in low rev, but fun factor better reving in higher revs, where the polini gets a bit chewy...
torque lover?
Go for polini box (or lth/tsr box)
original 200 engine?
go for polinibox, as abox which supports the original torque character of this engine, will show bigger effect, (as a reving box, at the original engine will show less effect, logically, as it isnt designed for reving)
Rev lover?
Go for sip road 3
8" and problems with main stand (which u wont/cant solve)? Go for sip road 3.
want to have maximum ground clearance?
go for polini box or a megadella.
Original 200cc engine?
go for polini
you have the sr2?
yes, definitely, buy the sr3, its a HUGE step, way more power. sr2 is pretty boring, compared to sr3
You have a polinibox?
stick to it.
more Videos2come:
- 50-100kmh
- soundcheck vs sr1, sr2, polinibox
- topspeed check
- 4th hill upwards PULLtest
--------------------------------------------------------------------------
FOLLOW me on
insta: @FreakMoPed
fb: / freakmoped
--------------------------------------------------------------------------
like what u see? found good tips?
u can support FMP via PATREON:
/ freakmoped
_____________________________________________
DISCLAIMER: the information shown in this video, is about THIS specific hardware. it is my personal observation documented with this video. It DOESNT automatically mean, that all such parts by this producer or seller do have or will have same issues.
_____________________________________________

Пікірлер: 59
@DJD8RR
@DJD8RR 3 жыл бұрын
Merci pour le test 😊👌
@VespaPXTeknik
@VespaPXTeknik 2 жыл бұрын
Nice video, thank you.
@leonardomesa8851
@leonardomesa8851 4 жыл бұрын
right now i´m using a sr2 but now i want the sr3 !!!
@JimVanMorrissey
@JimVanMorrissey 4 жыл бұрын
Thanks for that comparison with the Polinibox. It's a bit hard to tell from the mic, but how does the Siproad 3 sound compare to the Siproad 2? One thing I really like about the Polini box is how it doesn't have that metallic treble in the exhaust note, like a chainsaw. The Siproad 1 and 2 had that sharpness, whereas the Polinibox sounds more like an original exhaust.
@abdulrahim7531
@abdulrahim7531 4 жыл бұрын
Hi FMP, which exhaust do you recommend for a mhr 210 cylinder with matching crankcase with standard crankshaft? sip r3 or the polini box?
@bertiedoonerwind8061
@bertiedoonerwind8061 2 жыл бұрын
HI Freak, did you install the hydraulic front brake on your T5? If so do you have a vid please?
@gogogadget5
@gogogadget5 3 жыл бұрын
thx for the impressive Vid! current setup T5 172, 24si, 52mm 120/50, original box, cyl 174/124, ex port 67%, peak at 6100 rpm, almost full torque 16,4NM 4200 rpm, changing to 54 stroke now 120/65, expected 20 torque at 4800 on original box. choose SIP 3.0 or Polinibox? my thought ->Polini (better sound/torque) timings change to 177/126 for 6600 peak and 7400 max rev., or take SIP 3?? actually tested BBT: perfect torque curve, peak apprx 6200 rev till 7400, but CRAZY vibrations is a NOGO ;-) thx a lot for commenting :-))
@paolodea20777
@paolodea20777 4 жыл бұрын
Can you tell me why you use the iron hammer to mount the exaust on an alluminium cylinder?!?
@vespavespi
@vespavespi 3 жыл бұрын
Hi FMP ..been watching most of your video
@TuningVespa
@TuningVespa 4 жыл бұрын
Which carb do you use in this video? Have u some gsfdyno test?
@daeng_ipii7474
@daeng_ipii7474 4 жыл бұрын
Vespa t5 😘😘😘😍😍😍👍👍👍
@loftalofta8423
@loftalofta8423 4 жыл бұрын
Ciao..Was looking to replace my Sito+ ( PX 2002 / DR177 + 24/24) by a Sip Road 3.0...anyone has idea on how better it would be ( or is it not worth the change).
@andysioannides681
@andysioannides681 2 жыл бұрын
I have px125e zamp74100 , i want to replace the exhaust , what do you suggest and what jet *from sipscooter
@danielrazny1250
@danielrazny1250 Жыл бұрын
Which is better for PX125 2007 stock engine, Sip Road 2 or 3?
@palemale2501
@palemale2501 3 жыл бұрын
I just replaced the great SIP Road 2 with a SIP Road 3 on my PX125 (ex CAT 2015). Cannot get the right jetting and the best is same as the SIP 2 with Air 120, Main 96, Idle 48/100 but have not touched the difficult to access Idle screw. Acceleration is still great, but top speed dropped from max 56mph /90 kmh back down to the original 52mph/82 kmh. Worse is the front tube of the exhaust hangs too low (as seen at start of your video) at 11 cm ground clearance, or 9 cm with my 119 kgs on it - so it scrapes on the road on bumps or cornering !!
@malcymal
@malcymal 3 жыл бұрын
What engine you running? Sounds amazing and quick
@andysioannides681
@andysioannides681 2 жыл бұрын
Bro , i have pinasco alumi 177, 24 carb and sip 3.0 what jett do you sugg ans air?
@VespaPhil
@VespaPhil 4 жыл бұрын
Hi, great video as always, thank you! I have a question and would be really grateful if you or anyone else could help. I have a px malossi 210 sport (ported) with reed valve and dellorto 30mm phbh carb. I have a pm tuning expansion chamber exhaust and I am getting fed up with it. It really gets in the way of the centre stand and the end can is very, very close to the ground. Would a sip road 3 work with my set up? Would I lose a lot of power? Would I have to reduce any of the jets?
@bisugzzz
@bisugzzz 4 жыл бұрын
Which is better? This or polini box?
VESPA sip road XL VIPER BIGbox mount & 1st start / FMPguides - Solid PASSion /
9:04
FREAKMOPED Vespa Tuning | FMP - SolidPaSSion |
Рет қаралды 17 М.
SIP VAPE | BEST vespa IGNITION | FMP-Solid PASSion |
16:58
FREAKMOPED Vespa Tuning | FMP - SolidPaSSion |
Рет қаралды 29 М.
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 52 МЛН
Русалка
01:00
История одного вокалиста
Рет қаралды 5 МЛН
KINDNESS ALWAYS COME BACK
00:59
dednahype
Рет қаралды 138 МЛН
The Truth About Aftermarket Exhausts | MC Garage
6:40
Motorcyclist Magazine
Рет қаралды 3,3 МЛН
Presentación escape Polini, SIP Road 3.0, Megadella #holavespistas
3:28
Choosing a Vespa! - All the differences EXPLAINED!
20:15
Peter Lowe One
Рет қаралды 181 М.
2018 Vespa PX SIP road installation, sound file & test ride
5:50
Exhaust SIP Road 3.0 for Vespa Product Review | SIP {english}
4:15
SIP Scootershop
Рет қаралды 3,6 М.
Vespa Px 221 Malossi Tuning and Xmax400 Race
5:34
Özant Emil
Рет қаралды 562 М.
vespa BIGbox sip road XL vs 3 & 2 / SOUNDcheck #46 / FMPguides - Solid PASSion /
4:01
FREAKMOPED Vespa Tuning | FMP - SolidPaSSion |
Рет қаралды 7 М.
Sip road 3 exhaust installation /px200 engine
4:17
The nordic explorer
Рет қаралды 2,1 М.
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 52 МЛН