Geez, the breathing thing, I thought my eyes were going bad or I had too much to drink!! Righteous of you to call and ask first, that's pretty stand up!! 🍻
@blacknightcreations4 күн бұрын
Yeah I eventually fixed the auto focus, sorry about that. Yeah of course I’m not drinking someone else’s beer without asking
@anthonynork88684 күн бұрын
@@blacknightcreations you're building a badass Ute, I'm loving your channel! You a very meticulous, detailed, precise, and thorough and it will definitely pay off in the long run!! Here's crossing my fingers for SEMA!!
@blacknightcreations4 күн бұрын
Thank you, I think I’m doing a good job but it is really nice to hear that others think it as well. Keep those fingers crossed for me!
If i knew i would have been here. Promote it next time.
@blacknightcreations4 күн бұрын
To be honest I didn’t even know, I’ll definitely let people know next time and I’ll be doing it much more frequently as well
@antoniosvorrias91005 күн бұрын
Enjoyed the live - thanks! Looking forward to seeing the project progress.
@blacknightcreations5 күн бұрын
Thank you for dropping in!
@Haywardrc5 күн бұрын
Cheers for the live feed
@blacknightcreations5 күн бұрын
Cheers for hanging out. Now that i know what I'm doing I can do it more consistenly
@Gary_Guttz10 күн бұрын
Love the black and gold - looks so clean. Also I see where my new glass container has ended up hahaha. Can’t wait for the next update! 🦀
@blacknightcreations10 күн бұрын
I just borrowed that glass container
@DrivenbySeth12 күн бұрын
Fkn siiiiiiick
@blacknightcreations12 күн бұрын
And it’s only getting sicker!
@ahmadalzaidi676413 күн бұрын
This looks sooo good!!!
@blacknightcreations13 күн бұрын
Just wait till it’s finished built and painted!
@ahmadalzaidi676413 күн бұрын
@@blacknightcreations I’m excited!! I’m watching the playlist on your channel right now! I’ve binged the past 3 hours just watching it I think😂
@blacknightcreations13 күн бұрын
@ahmadalzaidi6764 hell yes! Did the last short find your algorithm?
@ahmadalzaidi676413 күн бұрын
@@blacknightcreations yes it did
@blacknightcreations13 күн бұрын
@ahmadalzaidi6764 awesome, well I hope you enjoy the series. More videos to come as well!
@masonberlin573713 күн бұрын
The bmw ute goes hard
@blacknightcreations13 күн бұрын
Getting closer and closer to
@myd00m18 күн бұрын
cool project! looks sick
@blacknightcreations18 күн бұрын
Thanks! Should look amazing when it’s finished
@rodsjames929818 күн бұрын
the e34 v8 axles uses 8 bolt not 6 , like the 35i, m5
@blacknightcreations18 күн бұрын
The ones I have are a 6 bolt and bolt up to the adapters. Part number is exactly the same as the 6 cylinder. Might be different for the manual version though, they might be 8 bolt
@Darkipod19 күн бұрын
You're going so deep into this, At ~2:13:00 you say thanks to some guy named Ean? Do they have a channel? Id like to watch more crazy rare panel repairs that are in depth!
@blacknightcreations19 күн бұрын
Yeah I went in a little blind on how much effort it takes to build a Ute. Edan is the guy who helped me pull out the engine, he doesn’t have his own channel although he probably should.
@gibby382020 күн бұрын
How did I just find this?? This will be epic, going to binge these all day
@blacknightcreations20 күн бұрын
These are my favourite comments to read! Glad the algorithm finally found you
@markboorman521721 күн бұрын
Another amazing episode keep lifting rocks !!!!!
@blacknightcreations20 күн бұрын
Cheers, we’re running out of rocks to lift
@Gary_Guttz21 күн бұрын
Love the compilation! Crazy looking back to the beginning.
@blacknightcreations20 күн бұрын
Glad you enjoyed!
@bimmerflex552621 күн бұрын
Excellent progress again. It’s all looking amazing and awesome. Your utter hard graft is paying off. U.K. salutes you. 🇬🇧❤
@TheNorthernmunky21 күн бұрын
Great work as always Lewis. Where is that M3 bumper from? I can find all the kit in metal but can’t find good quality bumpers anywhere
@blacknightcreations20 күн бұрын
The front bumpers from Mr bodykits, I’d recommend them if you’re after and M3 bumper
@e30_318is_project21 күн бұрын
Nice work! Looks very clean
@blacknightcreations20 күн бұрын
Yeah super happy with how they turned out
@phatputer21 күн бұрын
Great episode showing your progress and process, certainly continues to entertain
@blacknightcreations20 күн бұрын
Thanks, hopefully some more body work coming soon
@lolitagupta220123 күн бұрын
Hey , Synnedz here. Epic to see it grow like this man. Hope u get all the sucess u deserve u working hard for it ! :)
@blacknightcreations23 күн бұрын
Hey man! How’s the 1 series going? Cheers, just have to keep working away and get this Ute finished!
@lolitagupta220123 күн бұрын
@@blacknightcreations i started My own performance shop this week. Things are going épic. And remember it was all off a suddent. Guess its how it goes ;) the 1 series is getting a new hpfp to make sure i can reach those 320bhp and 600nm. Ill be having a Instagram page for the shop soon with some projects and Will send u when its ready ;)
@blacknightcreations23 күн бұрын
@lolitagupta2201 awesome man! Happy to hear, you going to aion underground when it finally opens up?
@juliadanvers665324 күн бұрын
Fascinating detail to the nonmechanical, right down to 'don't twist the white band thing on the windy thing,' Great coverage of some detailed work.
@blacknightcreations23 күн бұрын
Hahah cheers, definitely don’t twist the white band!
@juliadanvers665324 күн бұрын
That was both very interesting and amazing. You saved a great deal of money by making parts from templates. Well done, again!
@blacknightcreations23 күн бұрын
Thanks, it’s saves money and a bunch of time waiting for the plates to arrive
@davycrockettcallaghan977725 күн бұрын
One of the best builds I’ve seen 💯👍🏻👍🏻
@blacknightcreations25 күн бұрын
Cheers! I’m glad you’re enjoying what I’m doing!
@bimmerflex552625 күн бұрын
The best build. Phenomenal work. Well done, England looking forward to the completion. ❤🇬🇧
@blacknightcreations25 күн бұрын
Cheers! It’s stick cracking along but there are so many parts to a car!
@lekronus25 күн бұрын
only difference between an m3 door and a non-m door is holes for the trim clips, FWIW.
@lekronus25 күн бұрын
excited to see the rest of this come together!
@blacknightcreations25 күн бұрын
Yeah there’s a couple of minor differences
@huxyarmwrestling972625 күн бұрын
It will be worth in the end mate .. mint build
@blacknightcreations25 күн бұрын
Definitely agree, a lot of work but worth every second
@glennarnold397029 күн бұрын
hi lewis a little trick for putting the teflon seals on the rack is cut up a coke can wrap it around the shaft and slide the seal on straight up to the groove then slide the coke can back to the next groove then slide on the next seal and so on little trick the old man showed me can you see the light at the end of the tunnel yet cheers glenn
@blacknightcreations29 күн бұрын
Ohh yeah that would work really well wouldn’t it, having come from the mining industry I’m use to putting on giant teflon seals so these were pretty fiddly
@glennarnold397029 күн бұрын
@@blacknightcreations yeah my dad was a fitter doing mine stuff as well
@mike430sport29 күн бұрын
Where did you get the outside door panels for M3? I can only find Mtech. I’m trying to build a M3 convertible.
@blacknightcreations29 күн бұрын
Are you talking about the side skirts? I had a subscriber contact me and sell me a set. They can be hard to find.
@mike430sport29 күн бұрын
@@blacknightcreations right above the side skirts and clip or glue to the door.
@mike430sport28 күн бұрын
@@blacknightcreations I was told it is part of the body and I would need to purchase M3 doors.
@blacknightcreations28 күн бұрын
@mike430sport I’ve drilled holes into my door sills to take the side skirts and I’ve also bought M3 doors
@mike430sport27 күн бұрын
@@blacknightcreations thank you. The doors are expensive
@Gary_Guttz29 күн бұрын
I don’t think I could do this job, purely for the fact of if I tried to use a seal pick or blade to get those seals out I’d lose a finger!
@blacknightcreations29 күн бұрын
Gary, you also don’t have opposable thumbs
@Gary_Guttz29 күн бұрын
@@blacknightcreations 😹
@miketodesco691529 күн бұрын
Crustatio
@alexanderjones6383Ай бұрын
11:03 I wonder if a bit of heat on the aluminum housing could have potentially helped. Mind you not blistering hot but enough to expand that aluminum. Well played. I just found a couple Z3 racks for my Mercedes project on the cheap.
@blacknightcreationsАй бұрын
Definitely could have, my goal was to work out how to do it with basic tools so anyone watching could hopefully replicate it. Ohh nice they’re like hens teeth over in Australia and people who sell them don’t sell them cheap
@MattAKASoundwaveАй бұрын
Still my favourite video 😅
@blacknightcreationsАй бұрын
Hahahah good video, horrible drink
@jayinmi3706Ай бұрын
Feline Office Lewis seems to like your monitor. lol
@blacknightcreationsАй бұрын
Yeah she does love rubbing up against my monitors
@Tom-dz7ofАй бұрын
Removing that washer your 99% there but you would be good to use threaded bar and wind it out, weld a nut to the end or double nut it and slowly wind it out 👍🏻
@GioBessitАй бұрын
Awesome video once again bud. Do you use any specific grease when rebuilding the rack?
@blacknightcreationsАй бұрын
I don’t believe I did, just a good quality grease will do the job
@bimmerflex5526Ай бұрын
England really enjoying your epic adventures. Your e30 rocks. 🇬🇧❤
@adelittle4099Ай бұрын
Top work as always WorkShop Lewis👍 Crabity e30 🦀
@Gary_GuttzАй бұрын
Seats look so good!
@blacknightcreationsАй бұрын
And they work!
@164_MayhemАй бұрын
I have some words about steering wheel choice. I’m not a huge BMW guy but do you not have a flat bottom Alcatara option? (Audi do)
@blacknightcreationsАй бұрын
I don’t know if BMW do have a flat bottom factory option for any of their steering wheels, I think you can get aftermarket modified ones though.
@164_MayhemАй бұрын
@@blacknightcreations if it’s not a factory option I don’t see it fitting with where your going. Just thought I would throw some VAG group comments into your video
@blacknightcreationsАй бұрын
@164_Mayhem I had to have a think about what a VAG comment is. I’m trying to keep things looking stockish so a flat bottom probably wouldn’t work.
@zaccarthew6445Ай бұрын
One of the coolest projects ive seen on here, that thing is sick
@blacknightcreationsАй бұрын
Cheers! I keep telling people it’s pretty cool but I am very biased
@steveschriefer2733Ай бұрын
Normal exhaust. Office Lewis needs to tell Shop Lewis to stay in scope.
@blacknightcreationsАй бұрын
Hahahaha don’t worry, office Lewis has been ordering parts to use the genuine bumper and the standard exhaust.
@paulpobsanderson6219Ай бұрын
Genuine, why go to all that trouble and make a daft exhaust, keep the bumper standard. 👌🏻
@blacknightcreationsАй бұрын
I mean I guess but really isn’t the whole car a little daft?
@paulpobsanderson6219Ай бұрын
It’s not daft, its actually a very clever build. You could fit a spare wheel cradle later on in that void.
@blacknightcreationsАй бұрын
@paulpobsanderson6219 well thank you! Yeah there’s definitely options do to something in that spare space. You’re in luck because I have to use the genuine bumper and normal exhaust.
@GioBessitАй бұрын
Ok you have answered a question I asked in Ep27 😁
@blacknightcreationsАй бұрын
Hahaha it was a very common question
@GioBessitАй бұрын
I'm only on Ep27 so don't know if you've covered it. How are you going to access the bolts (fastners) to remove the rear shocks in future?
@elvinklitАй бұрын
Like a true knight, the crab must be "sir"... And as a professional "ROck TUrner", I would assume that he is known as: Sir Rotu the Crab
@blacknightcreationsАй бұрын
Hahaha I actually really like that
@melvin_capitalАй бұрын
Crabriella
@melvin_capitalАй бұрын
Also I've never heard anyone outside of my work use the acronym NFG before... love it hahaha!
@blacknightcreationsАй бұрын
Coming from fitting and turning and the mining industry we were supposed to use it be we did
@melvin_capitalАй бұрын
@@blacknightcreations yep energy/electricity supply industry here... we definitely use it haha
@blacknightcreationsАй бұрын
Just curious what industry you work in?
@melvin_capitalАй бұрын
Electricity supply - transmission and distribution
@blacknightcreationsАй бұрын
@melvin_capital ahhh yes surely you see plenty of NFG things
@melvin_capitalАй бұрын
Hey Workshop Lewis have you considered just leaving the microphone on all the time? :P
@blacknightcreationsАй бұрын
The battery on the receiver doesn’t last all day and then I have to delay filming while the battery charges