Жыл бұрын
Пікірлер
@rogergags Ай бұрын
Stupenda! Che lavoro!
@onboro_alfa_SGL 2 ай бұрын
Hi, I’ve just arrived here via Instagram and subscribed your channel. I’m also Giulia 1750GTV owner in Japan. I bought my Giulia 37 years ago and have been owning it. Looking forward to watching your next video! (I’m also making some videos regarding my Giulia 1750GTV on my KZfaq channel.)
@raisingjunior6389 2 ай бұрын
Thanks, I just had a look at your channel and there are some great videos there!
@georgebettiol8338 6 ай бұрын
Pleased to see a completely renovated rear axle assembly - great work. The only aspect that caused some consternation was the painting of the wheel rims complete with the old wheel balance weights - which will undoubtably need to be removed and others reattached once new tyres are fitted and wheel assemblies are re-balanced.
@raisingjunior6389 5 ай бұрын
Thanks...not to worry the steel rims are temporary and the tyres are over 20 years old. I will be using the silver alloys shown at the end, i'll get new tyres and balance them when the car is close to be done
@georgebettiol8338 5 ай бұрын
@@raisingjunior6389 On a further viewing, I note the trial fit of the replica GTA rim. Appreciate the response - thank you.
@MarioCastronovo-tr5ff 6 ай бұрын
Bravo :già fatto [gt]
@MarioCastronovo-tr5ff 6 ай бұрын
9:41 & 10:43.
@alecjones7299 6 ай бұрын
This was really great work. How long did it take you overall
@raisingjunior6389 6 ай бұрын
This part took about 3 and half to 4 years of Saturdays working on it, prep for paint took us another year of Saturdays!
@alecjones7299 6 ай бұрын
Wow, that’s amazing. You are a total inspiration.
@raisingjunior6389 6 ай бұрын
@@alecjones7299 thanks I'm still not done but to be honest I only got a couple of months worth of work this past year!
@M1993W 8 ай бұрын
Great work!!!
@user-pz4cd1tw1g 10 ай бұрын
Congratulations on the brilliant content & sharing your journey.
@bonsteinbonstein5895 10 ай бұрын
Great job, looking forward to the next video.
@nickgray4129 10 ай бұрын
Glad you are back. I hope the long delay was not down to illness or anything unpleasant. Keep going,the home straight is in sight.
@raisingjunior6389 10 ай бұрын
Hi Nick, thanks for the concern but it's quite the opposite, my wife and I had a baby boy in late 2021 so free time just vanished hehe. I kept at it with the few free hours I had available
@nickgray4129 10 ай бұрын
Congratulations. So now there are three generations of Alfistas in your family.😀👏
@elm11g 10 ай бұрын
🤩
@alank247 10 ай бұрын
Good to see you're still around and still pushing forward.
@hilbilchillbil 10 ай бұрын
Nice job 🙏
@alastairwatson3201 10 ай бұрын
Great to see you back! I really, really enjoy your videos and am always excited to see what you’ve done to Junior since last time.
@raisingjunior6389 10 ай бұрын
Thanks a lot, they've been taking long but I hope it will be done....some day!!
@ABROOKSH 10 ай бұрын
Grit… you show true grit and determination. Love it.
@MetroCapitalLets 10 ай бұрын
Well done on the tremendous work and thank your sharing
@frankshhhaaa7454 10 ай бұрын
Wow, I just finished watching all the episodes and both the video presentation and work on the car are fantastic! When can we expect the next video in the series? Keep up the great work!
@raisingjunior6389 10 ай бұрын
Thanks for great comment, I believe you're in luck as later today/tomorrow we will be uploading a new episode which we finished editing last weekend. During the past year I was a bit short on free time to work on it but the project is still going...stay tuned for Ep 19, there's a couple of small surprises too
@scalpa1056 10 ай бұрын
J aimerai savoir comment fini cette alfa ?
@raisingjunior6389 10 ай бұрын
This was the last video we posted but by this weekend we will upload a new video showing the current stage of the car. Over the past year I didn't have a lot of time to work on it but the project is still going on slowly. I post regular updates on Instagram @raisingjunior
@scalpa1056 10 ай бұрын
Le travail effectué des mains de maître..bravo 👏 👍🏻👍🏻👍🏻👍🏻
@MarioCastronovo-tr5ff 11 ай бұрын
Dove posso trovare parti metalliche Mario Palermo
@raisingjunior6389 11 ай бұрын
La maggioranza delle lamiere sono state comprate da 'Classic Alfa' In Ingilterra ma ci sono altre compagnie in Europa specializate in ricambi Alfa Classiche come OKP, Del priore, Zucca ricambi etc
@MarioCastronovo-tr5ff 11 ай бұрын
@@raisingjunior6389 ok .
@antonioriccio-cw4rc Жыл бұрын
Great Werk so far. i enjoyed Watching all Episodes. Have you got a Video from Final Assembler car?
@raisingjunior6389 Жыл бұрын
Hi Antonio, thanks for watching, this episode is the last one uploaded as I didn't have a lot time to work on the car this past year, however we are editing episode 19 at the moment..
@rsdza Жыл бұрын
I know this was a while ago, but do you have the designs for the rotisserie? I probably need to build one!
@raisingjunior6389 Жыл бұрын
Send me an email at [email protected] have it saved
@The-truth-is-valuable. Жыл бұрын
Really good work.
@amulheirn Жыл бұрын
I am enjoying your videos - particularly that you are working with your dad. Great work both of you.
@1967250s Жыл бұрын
Que Bella! Bravo!
@1967250s Жыл бұрын
Did you paint all the cavities, I hope? Bellissima!
@raisingjunior6389 Жыл бұрын
Yes well they're painted with primer then I applied wax after the paint was done
@fax182 Жыл бұрын
I wish I had 1% of your skill
@raisingjunior6389 Жыл бұрын
Thanks!! this video is a compilation of 5 years of work on weekends, with enough practice and patience most people can do it...it takes time
@michaelengels2514 Жыл бұрын
This is about the third time I’m going through your build so far. Great to see what I have to go through. I’ve got a 1600 GT Junior that my father in law gave my son and I bought a step nose that I WAS going to use as repair panels but changed my mined and decided to do that one also. Unfortunately the step nose doesn’t have an engine but my son’s car was complete with its original engine.
@raisingjunior6389 Жыл бұрын
Thanks for watching!! Good plan, don't cut up the step nose body as it's more rare than the 1600gt Junior. An engine shouldn't prove to be too difficult to find unless you want a specific engine block code. I bought my car without and engine too!
@georgeclements2742 Жыл бұрын
How proud you must feel.
@raisingjunior6389 Жыл бұрын
Amazing...it was the culmination of 4 years of work
@georgeclements2742 Жыл бұрын
It's wonderful how much better repaired metalwork looks with just a coat if primer. Super work.
@georgeclements2742 Жыл бұрын
Just a quick comment for the algorithm.
@raisingjunior6389 Жыл бұрын
Haha thanks for thinking about it :) btw the car isn't done yet, but it's should be on it's 4 wheels in the near future
@georgeclements2742 Жыл бұрын
I've just found your channel and I am catching up on the episodes: they are very informative and enjoyable. One question please: did you continue to use gas free flux core welding or did you change to gas: if so, what gas are you using ? Thanks and good wishes.
@raisingjunior6389 Жыл бұрын
Thanks for the nice comment, great question, as I used a flux core welder for the rotisserie but changed to gas sheliding for the repairs on the car. I used a CO2/argon gas mix called Atal for the Mig welding
@georgeclements2742 Жыл бұрын
@@raisingjunior6389 Thank you. I have just watched the episode with your daughters: they are charming. Best wishes.
@bryandickerson5365 Жыл бұрын
Very inspiring!
@raisingjunior6389 Жыл бұрын
Thanks...that part took a long time to complete!
@rezaq1 Жыл бұрын
Your work is absolutely fabulous!
@oacumulador Жыл бұрын
Great series
@alexandrealmeida2932 Жыл бұрын
Bom trabalho de reparo.
@OnlineWealthMaker Жыл бұрын
Hi Buddy when is the next episode of the rebuild of the 105? - looking forward to it
@raisingjunior6389 Жыл бұрын
Thanks for the interest, I hope to finish it in a couple of months, if you're curious to see where its at now I have some update pictures on Instagram
@robertholmes3945 Жыл бұрын
Looks fantastic. I'm starting to think bluette is a color I need to consider.
@raisingjunior6389 Жыл бұрын
The closest contender was Ochre yellow however I've seen another great colour called "Azzurro Spazio" which I wasn't aware of before, still Bluette is my favorite
@robertholmes3945 Жыл бұрын
@@raisingjunior6389 My GTV is Giallo Piper. I've got a Berlina that would look really good in Bluette.
@modelleg Жыл бұрын
Inspiring!
@AlfaAddicts Жыл бұрын
Just love this recap, wow the work manship that you giys have put in is a credit to you💪👍🏻😎
@raisingjunior6389 Жыл бұрын
Thanks, it's the common places were these old Alfas like to rust !
@alastairwatson3201 Жыл бұрын
When is your next episode coming out? I’m looking forward to see how you’ve progressed since paint.
@raisingjunior6389 Жыл бұрын
Thanks for the interest, it's a bit difficult to say at this point as I haven't had a lot of time to make progress on the car this year. We did move on with sound deadening, wax protection, rear axle refurbishment and just started the wiring...still need enough content for a video
@alexandervanwyk7669 Жыл бұрын
We are busy with a 2000 gtv. Exactly same process. Took about 6 years already. Soon she'll be up and running. Love from Africa'
@raisingjunior6389 Жыл бұрын
Awesome, these cars just do that, keep us busy! I've been at it for 6 years now but progress has slowed down this year
@alexandervanwyk7669 Жыл бұрын
..and my wife always commented: "Wish I was a car!" Ha ha dream on baby.
@duncankerr8258 Жыл бұрын
You should definitely have leaded the rear quarter to suit the boot lid,so much easier,great work though
@raisingjunior6389 Жыл бұрын
Thanks, I never worked with lead so I wasn't sure if to use it or not...still the edge would have ended up being 6mm thick or so
@duncankerr8258 Жыл бұрын
@@raisingjunior6389 Thanks for your reply,I also saw in another of your videos that your garage is small and lead is poisonous.Almost all porsche and ferrari I have worked on from 60's and 70's have leaded gaps.Still great work.
@RR-mt2wp Жыл бұрын
Hats off to you for getting so much done in a small garage.will enjoy seeing other videos.
@raisingjunior6389 Жыл бұрын
Thanks, there's plenty to watch, it's getting exciting now!
@kevinpantera4429 Жыл бұрын
Great job! My kind of restoration
@raisingjunior6389 Жыл бұрын
Thanks, there are more episodes after this when we started painting the body
@kevinpantera4429 Жыл бұрын
@@raisingjunior6389 I'm seriously looking at a 1967 1750 Alpha Veloche. Scarry rust but seen worse. Runs drives stops. Decent shape. On the fence, am pretty decent with a wrench and been long time since I did any body work, but I guess it's like riding a bike! Wanting 16k quite a bit to me. Prices r crazy now but music going to stop. Will keep car if I fix up. And drive it
@kevinpantera4429 Жыл бұрын
@@raisingjunior6389 if I do buy it, I could sure use a few pointers!
@maximealexandre8896 Жыл бұрын
Great vidéos ! Can you share the blueprints of the rôtisserie ? I'm planning to do the samedi job on my futur project car (2000 gtv or 1750 gt). Tanks !
@raisingjunior6389 Жыл бұрын
Can you send me an email on [email protected] and I'll reply with the blue prints
@teis79 2 жыл бұрын
Nice job Geoffrey!!! Good to see you're still working to perfection! I recently sold my Baywindow...
@raisingjunior6389 2 жыл бұрын
Thanks, it's been in the making for a while hope to finish it eventually!
@gailenborg8576 2 жыл бұрын
Simply awesome Geoffrey. Well done to you and your dad. The colour came out spot on. Cant wait to see how it will contrast with the interior. 10/10 mate ;)
@raisingjunior6389 2 жыл бұрын
Thanks Gailen, the videos show what I rant about at work ha!
@geoplastcaribeplast9774 2 жыл бұрын
Love the dedication and the love of perfection, achieved by working hands, great job .
@alfaclassicarestore 2 жыл бұрын
great job Geoffey like always.And now wait long long work to end.bests regards paul