Thanks for posting this vid, I remember seeing the Little Red Wagon and Hemi Underglass wheelstanders there one weekend as a young teenager. I moved to Texas in 1976 and moved back to Michigan in 2019 and have wondered what happened to this place I wished I would have heard about this show and hope to hear about the next one!
@AdamPE2116 күн бұрын
Thanks for watching! Next show is August 11th and I will be posting up a video from an interview with the organizer in a week or so!
@hdse10316 күн бұрын
@@AdamPE21 Liked and subscribed, look forward to the next one.
@erikalexgrover19 күн бұрын
Hey Adam, I just brought my old 84 JS550 back to life and would love to ask you a few questions as there are not many other informative videos about working on these old skis
@AdamPE2119 күн бұрын
Go ahead man! I will try to answer over next day or two
@AriesRox201221 күн бұрын
13:56 it worked
@brimtime811721 күн бұрын
Hey great video, enjoyed watching the day of an Indy race. You were in the best seats for the last lap pass. Great video..
@AdamPE2121 күн бұрын
Thanks man!!
@Garageaholic21 күн бұрын
You keep saying "locked up". What gets me about this is that the "locking up" from the way it feels for your hand (very low torque) would be essentially unlocked if it were installed on the car. Sounds like you need to sweep the frequency as you put a torque wrench on the INPUT, not the outputs. It's a planetary gear, so the input torque related to the 2 output torques is the key here. Great video, could trim some of the fat, but good to hear your stream of consciousness. Keep it up!
@AdamPE2121 күн бұрын
Yeah when I say locked up it is literally bound up. I feel like there is some bearing loading that happens when the transfer case actuator is stalled. I would not want to drive torque into the TC in this state. Still on my KZfaq editing journey, figuring out how to be more efficient with the videos. Stay tuned for more 😃
@Garageaholic10 күн бұрын
@@AdamPE21 Absolutely. I plan to build an E36 Wagon with an E91 complete drivetrain installed, so very interested in tweaking with the 4WD Features. I plan to build off of your efforts here, and document it with credit to you, so keep up the good work!
@AdamPE2110 күн бұрын
@Garageaholic Thanks man! Good luck.
@AdamPE2127 күн бұрын
Here is a view and commentary from @nikvonmatt372 in the cutlass! 😂 kzfaq.info/get/bejne/fclogJZ_2bfIn3U.html
@JunkRacecars27 күн бұрын
Fuckin mint! What made you say it's easier to drive than your E21? Is it just more compliant and forgiving?
@AdamPE2127 күн бұрын
Yes, a lot more comfortable but definitely not as quick. It makes me realize I have to do something about the brakes on the E21 to make it more responsive!
@bustede2128 күн бұрын
I bet if you had a seat that held you in tighter and stiffer suspension you could really find the limit of that truck. Overall though man, you gave it hell and had fun doing it!
@AdamPE2128 күн бұрын
Thanks! Yeah man it was a blast! Going to roll the fender lips up front and stiffen up front springs at least and look into a seat that’s got some bolstering to it. Though the ride is nice and cushy in the OE seat, but sometimes a sacrifice is necessary for speed!!
@luisochoa8093Ай бұрын
🔥🔥🔥🔥🔥 That Sonoma looks killer on the Z06 wheels!! Andos sounds even better- Congrats Adam 👀👀👀
@AdamPE21Ай бұрын
Thank you Luis!!
@TricknologyincАй бұрын
I was hoping they cleared more. Man! Most of the brush you see is Autumn Olive. That stuff is so nasty and invasive! Every year I tear a huge brush pile of it out on our property and can never catch up with it!
@micahfleming989025 күн бұрын
Most of the property has been cleared!
@AdamPE2125 күн бұрын
@micahfleming9890 Awesome to hear! I won’t be able to make it this year unfortunately, but hopefully it’s on next year again!!!
@micahfleming989025 күн бұрын
@@AdamPE21 if plans change let me know and I’ll get you in there! I’m not sure if you saw the flyer or not but we opened up a 501(c)(3) non profit for the track and we are releasing our goals to the public at the show this year!
@AdamPE2125 күн бұрын
@micahfleming9890 Thanks man, appreciate it! If not this year I’ll need there next year. Thinking about ever getting some fun runs going at some point on the track? 😀
@micahfleming989025 күн бұрын
@@AdamPE21 it’s in the works😉
@Jim-yv5hmАй бұрын
Thank u!!!
@mfherreradiАй бұрын
Great content! Thanks!
@AdamPE21Ай бұрын
Thank you sir! 🫡
@christophertanner8273Ай бұрын
How does he get the speedometer on his screen like that
@AdamPE21Ай бұрын
A melding of GPS technology and frame by frame edits!
@oscarleroy1683Ай бұрын
Nice video of this event. I didn't hear about it until after it had happened. I live within 5 miles of here. The Nasty Nash was purchased new and raced here by my late Uncle George LaVictoire. Rode in it a few times when I was a kid and he lived on Garfield. He really hated to sell it. From what I heard this isn't the OG race car, its a clone. Still good to see. Great video. Hope to make it this year though.
@AdamPE21Ай бұрын
there is supposed to be another one this year! I don’t think my schedule will allow me to make it but here is your chance to go
@micahfleming989025 күн бұрын
@@AdamPE21August 11th!!!!
@Michael-gu5klАй бұрын
Cheers from the Paddock at the Start Finish Line! Hope we can meet up next year and what did you do during the rain delay? I went into one of the garages they kept the safety trucks in and crashed!
@AdamPE21Ай бұрын
we had under the stands and turn three, waited it out there, and then went up as soon as the rain let up!
@Halcyon1861Ай бұрын
I saw the flyover and never saw the Blue Angels.
@AdamPE21Ай бұрын
ah hahaha my mistake! It was the Thunderbirds 😅
@RustyRenchАй бұрын
What was it?
@AdamPE21Ай бұрын
Not sure, it ran out of gas on one tank and flamed up when I switched to the other. No pops or bangs with it either. Have never had this happen before, but ran fine once it started.
@RustyRenchАй бұрын
@AdamPE21 yeah I've been a lawnmower mechanic for 10 years and never seen that either.
@FahrenheitRUSАй бұрын
Hot exhaust pipe, old spark plug, so gas burn outside the engine
@RustyRenchАй бұрын
@FahrenheitRUS but it started and ran , it happened after he switched tanks and it ran fine so the spark plug works. I've worked with many hot exhausts and old spark plugs and that's never happened.
@SparkybearEnginesАй бұрын
How would a spark plug make it shoot flames?
@justinkolan5500Ай бұрын
Check the spark plug
@trackdogcrowesnest769Ай бұрын
This was my 40th 500 in a row 41 all together ! One great thing about living 1.8 miles from the greatest race course in the world i got to take a nap at home and wait out mother nature ! I sit in turn 3 to section 4 rows JJ & HH seats 1-4 .and it was a great race thanks for sharing 🏁🏁🏁🏁
@AdamPE21Ай бұрын
Excellent! This was year 26 for me, year 4 for my son.
@trackdogcrowesnest769Ай бұрын
@@AdamPE21 that's even cooler when you get to take your son with u 🤘
@Michael-gu5klАй бұрын
At least you didn't have to go far to get home and hope we can meet up next year as this was my 48th STRAIGHT Indianapolis 500 in a row! What a finish!
@drewrussell6143Ай бұрын
Cheers from Sec 16 Row Q Seats 16,15. See you next year, 500 neighbor. 🍻
@DustyTailАй бұрын
Dang you hiked it down to victory circle. I weathered the storm under a pop up with some friends and some peeps caught out, in parking just so of 16th. Some in cars. Went in around 2:45. Weird driving out later it was dark. Honestly, I never tire of witnessing revelers and the humanity part of it all.
@AdamPE21Ай бұрын
totally! We have to walk back underneath the front stretch to get back to our car anyways, and we saw Josef up there so we decided to walk down that way. it was crazy walking around there in the twilight.
@randygravel2057Ай бұрын
Well done 📷
@AdamPE21Ай бұрын
Leave a comment on what your favorite part of the video is!
@wilburshaw9330Ай бұрын
I left my house in Avon at 3:00 , still was in my seat right on time & dry……
@gernithАй бұрын
Can't tell if that guy is screaming "go!" or "no!"?
@AdamPE21Ай бұрын
I believe it can be translated as “WHOA!!!” “WHOA MAN!!!”
@jsomething2Ай бұрын
did you sell off the hybrid yukon m
@AdamPE21Ай бұрын
No sir! Still in the fleet and going strong.
@jsomething2Ай бұрын
@@AdamPE21 nice, so few around still, it's a little sad to see each one die. I just watched your brake video and wondered about it when I saw this new one. I did pads rotors on my 11 2 mode, they seem to have to much initial bite for the system. the pedal feel is super grabby at low speed. thinking I might swing by the dealer and see what oem pads would cost. I saw you did acdelco rotors, did you use Delco pads too? I should totally be asking this on that video lol.
@AdamPE21Ай бұрын
@jsomething2 yes, seems like a lot of people parting them out on the Facebook group. Going to try to keep on going for as long as I can!
@AdamPE21Ай бұрын
as for what I did on the hybrid brakes, I used the same AC Delco rotors and one with just a standard Wagner OEM replacement pad.
@jsomething2Ай бұрын
@@AdamPE21 yes, I've been seeing lots pop up on Facebook market for part outs. I wish I had a place to store a parts truck haha. I would like to keep mine going for a long time too. I do have my eye out for a cheap tranny just to keep on hand as that seems to be the hardest part to get if it fails. thanks for the brake info, I'll look those up too.
@TheProfessor07Ай бұрын
Why is Satan screaming like a bitch??
@AdamPE21Ай бұрын
Thank you for watching! Check out the chapters below (click "Read More"): 0:00 - Intro 0:36 - Walking into the track 1:25 - Tunnel into the infield 2:01 - The Snake Pit 2:16 - Storm Emergency announcement! 3:05 - Hiding under the Turn 3 Stands/NE Vista during the storm 4:10 - Walking up to the grandstand 4:41 - Track dryers - getting close to action! 5:18 - Playing of Taps (amazing how 350k people can be quiet!) 6:13 - USAF Thunderbirds Flyover 6:33 - Parade Laps 7:46 - Build up to Green Flag!!! 8:10 - On Track action!!!! 9:55 - Last Lap Newgarden Passes O'Ward for the Win!!! 10:55 - Newgarden pace car lap after the race and people climbing Fences 11:32 - Guy tries to hand Newgarden a beer in Turn 3 12:03 - Conclusion, thanks for watching!!!
@user-vl1cz8ij3jАй бұрын
Bro I was going for Scott mcglaughlin. But damn those f16s fr
@MarkWork-fd5ttАй бұрын
was there sitting in pagoda stands---great race !
@FelNoobsАй бұрын
Remember dear From 2003 to 2008 models, the item number differs from 2009 to 2013
@mitchbeck01Ай бұрын
I just did the front brakes on mine. The original calipers with the original caliper bolts. I had to use thin wall sockets to get them off. Replaced them with button head Allen bolts. Could solve your brake pad overhang issue
@AdamPE21Ай бұрын
This is a great idea! Will look into this, already have a bit of wear on these pads, but something I’ll consider for sure when I do the rotors and pads agaon.
@chrisjones52982 ай бұрын
Get further over the front and smooth that porpoise out. A 2 bar intake grate will probably get you 1mph. Lots of small mods will help. Flame arrestor sucks if stock, it'll suffocate the engine. A pipe will help. I build 50+mph 550sx skis.
@AdamPE212 ай бұрын
Excellent! Early this summer I plan to put in a new Wax Racing wear ring with a Solas 13/18 stainless impeller. Planning to remove the rev limiter too to see what effect that has.
@barenekid96952 ай бұрын
Why not use dishwasher soaps ?
@AdamPE212 ай бұрын
Suppose I could try but someone on here mentioned it could corrode various metals. Chose simple green because its a known motor oil/grease cleaner and used in other cleaning systems
@samcassidy43822 ай бұрын
It's jetski season for sure! I'll be tearing down the polaris 1200 this weekend to get the ol' gal ready. Might throw a new prop on it while im at it. I'm hoping to hit 70mph this summer!
@AdamPE212 ай бұрын
DO IT!! I need to make my way up to the U.P. for some remote lake riding!
@lemoneleven21792 ай бұрын
is that silicone around the pump factory? do you know if your pump has been rebuilt?
@AdamPE212 ай бұрын
i’m not sure, but I plan on upgrading my wear ring and impeller early this summer, so when I pull it out we will see.
@AdamPE212 ай бұрын
Check out the video I dropped today! Put a 2nd pump together with some fun hardware
@christophertanner82732 ай бұрын
I know this guy. He falls like that sometimes.
@AdamPE212 ай бұрын
all the time
@mreinsmith3 ай бұрын
Hey Adam, do you know of a way to bypass the thermostat on a dishwasher? I don't need it to heat up, it just kills time and electric. I've been looking all over and as you can imagine there isn't much need for someone to do this so I'm not finding anything. Thanks again!
@AdamPE212 ай бұрын
If it’s like most of them I’ve seen theres a spade connector that slides onto the heating element that you could probably just disconnect and tape up (don’t want a bare wire floating there or touching the floor!) Should run underneath to where the element goes through the bottom of the tub. Make sure the washer is disconnected from power when you tape it off though because it’s probably 110V going to that element.
@mreinsmith2 ай бұрын
I'll let you know if it works... and if I survive it 😁
@AdamPE212 ай бұрын
@mreinsmith 😅
@user-mq2di4br3t3 ай бұрын
I changed sensor and filter still get check engine light sometimes P0521
@AdamPE213 ай бұрын
Interesting, I wonder if you have a wiring issue or the oil pressure itself is critically low. Do you have an oil psi sensor on the dash?
@Stephen_Green3 ай бұрын
If I wanted to simplify this and only worry about 0% and 100% could I just run a switch to the power/ground for full rwd/awd with a flip of a switch? Cool to see the tcase unlock with zero power mechanically.
@Stephen_Green3 ай бұрын
Putting an awd setup using the atc300 in a racecar application, don’t care much for the adjustable power split (30/70 etc)
@AdamPE213 ай бұрын
Unfortunately straight 12V to it will lock it up completely (no movement from the shafts at all!) and draw greater than 20A…some people have put a current limiter on it to stop it after a certain amount, but unless it’s continuously pulsed it won’t stay in the 4wd position. Really looks like it needs a controller.
@stephaniebooth61693 ай бұрын
Chevy s are like ass holes, every one has one
@jimi.c.e.3200Ай бұрын
No V-8's are like assholes, every body's got one!!!!! Hope this is an Annual Event !!!
@teddyroweshow56433 ай бұрын
I’m soooooo curious 🧐. Keep up the posts.
@kidkeegan3 ай бұрын
i’m 19 thinking about getting a 550sx 1990 on facebook market never rode one but i been wanting one so long you think it’s worth it?
@AdamPE212 ай бұрын
No better time than now to try! I was 29 when I got mine…took me a good 2.5 seasons to learn how to drive it. Have enjoyed it almost 10 years! Easy to work on if you have the ambition.
@RudyFrey-uy8my3 ай бұрын
What a waste of time
@highnoon67913 ай бұрын
keep this project alive please!
@AdamPE213 ай бұрын
I plan to!
@darrellhicks9113 ай бұрын
Hi Adam, Great how to video . Thank you for the demo on how to do a closed loop solution system. I have been searching for the info on the relay you used and how to wire it. There is a mention from you that you will post it in the community section but I cant locate it? Thanks and keep up the great content. Cheers
@AdamPE213 ай бұрын
Both a short and community post are now up!
@jimk68043 ай бұрын
Keep at it man, if you figure this out, you'll go down in the books
@AdamPE213 ай бұрын
Thanks man! I am determined no matter how long it takes. Need to start working on the mechanical side now!