Thanks, my brother purchased this for me! I love it and look forward to using this in my yard!!! ❤️❤️❤️
@christopherhagans448811 күн бұрын
My friend I was wondering i have a honda gx35 4 stroke strimmer can I get attachments for this modal thanks for help.
@lynntunes14 күн бұрын
Great!! Thanks, I’ll take this on tomorrow and report back!
@BLIXBE.Offical17 күн бұрын
Anyone know what type or brand of oil to use after draining the crank?
@dwanewitter633018 күн бұрын
Thank you for this video it help me alot ..
@outtakontroll333418 күн бұрын
wish mine ran that well
@sharonducci708918 күн бұрын
Can I use something like that to bypass the system inside my dehumidifier it is a project getting it in or out so what can I do
@sharonducci708918 күн бұрын
It was filled with a gooey gel bacteria when I took it apart cleaned it all off make sure the hose was good make sure the floats would move put it all back in it runs beautiful however this water is not draining out I think the pump it burned out It’s a base aire 90x and I can’t find the part anywhere it cost me a grand for this machine warranty for five years and the pump died in two years and they don’t warranty the pump nor do they have it online
@sharonducci708918 күн бұрын
What are you doing when the pump in need isn’t being sold on their website or anywhere else
@mbank383220 күн бұрын
I tried to plug it in and fill up the water but it just doesn’t move…
@Michael-cy9eh23 күн бұрын
Thanks for the information. Great job
@ChuckD49625 күн бұрын
The keyway is the slot machined on the axle. What you’re talking about is the “key” lol
@doinkeroni28 күн бұрын
Awesome content on the honda trimmer with kombi attachments. May i ask how you did this since the honda shaft has a star pattern while the stihl has a square? Thanks! I have a honda HHT35 trimmer that i am trying to retrofit to accept all of my old ryobi expandit attachments. I am hoping to do something similar to your other video but using ryobi upper parts rather than stihl. However, i dont fullly understand how you are using this long honda shaft since it has the wrong cable inside.
@ErikAsquith27 күн бұрын
When was your unit manufactured? And are you in the United States? Mine unit came with an inner flexible cable that has a square end (not a star). So Stihl Kombi inner and outer shafts were a direct swap without needing to make any custom modifications to the inner shaft ends, or the Honda motor head.
@doinkeroni27 күн бұрын
@ErikAsquith you are right! I just looked at my unit (solid shaft hht35s) and it was square shaft... but I looked at the versattach units and they appear to have a hex shaft. I was able to take my toro expand-it and put it right on the honda! Thanks!
@molivroman980629 күн бұрын
I lost that drive cover 20 years ago. nothing stops these things. bought mine in Mobile in late 80's or early 90's. best product I have ever own.
@afzaalkhan.m29 күн бұрын
Excellent tutorial. Hopefully i willbe able to fix the rattle in that area
@ChuckD496Ай бұрын
Wow!!!! That thing is mint!!😍
@Ubebread1Ай бұрын
How did you remove the metal tabs from the caseta switches? They are in the way.
@chaos1291975Ай бұрын
just a little info the bottom of the little giant check vale pops off so you can clean it make sure to put the ball back in place before putting the cap back on . the q tip will not get the stuff on the other side of the ball .
@tcc447Ай бұрын
I called for HVAC service. The tech didn't even try to diagnose the problem or attempt to repair my existing pump. He immediately concluded I needed a new condensate pump and I had no choice but to pay $900 for the service charge to come out, the "labor" to install (45 minutes) and the pump ($75 on amazon).
@ErikAsquithАй бұрын
Wow, that was an expensive condensate pump. Sorry to hear about that.
@Tread6321Ай бұрын
I have a very similar one, still runs great. Came across your video looking for a grass collector. How much did you end up getting for it?
@mikeevans6589Ай бұрын
You want to tin the flange, clean up the lead pipe with wire brush and flux the outside. Add the ring. Use 50/50 solder. The ring and lead joins fairly easily, the solder actually helps the lead melt as well. There’s a video on here of doing the job. It offers structure when you solder. After adding the glue, you lose the option to solder. At some point, if your not willing to learn by practice, just pay a plumber. You will also get inspection recommendations when they are premise. It’s another benefit.
@CharlesJohnson-yd9ymАй бұрын
Excellent Video Thanks Brother!!! Chuck in Michigan
@hoodee_h9547Ай бұрын
Very helpful
@rainerneumeister5239Ай бұрын
How many cc ??
@rainerneumeister5239Ай бұрын
What cc do these little motors have ?
@user-up4td6kh9kАй бұрын
That was the problem...thank you very much😊
@RcAaron19782 ай бұрын
Recently decided to hunt down one of these. My first rc was a special buggy. I put that thing through hell as a kid. I had a bunch of rechargable batteries for it thankfully
@StarknightMT_official2 ай бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Soft Rear Windshield for your Honda Pioneer 700
@ErikAsquith2 ай бұрын
I appreciate the offer. However, I no longer have the Honda Pioneer 700.
@StarknightMT_official2 ай бұрын
@@ErikAsquith Hi, thank you let me know
@Parentsfamily-rk6vp2 ай бұрын
🎉
@adriancook41132 ай бұрын
Great video! These are STILL great mowers.
@Fundaykidzz2 ай бұрын
Great video what’s the name of the tool ?
@jessezamora67572 ай бұрын
I have the same mower except my has a key electric start very rare.
@tshell722 ай бұрын
How can I get the pull rope put on ?
@tshell722 ай бұрын
How can I get my start cord wound back up there correctly
@rotoryacht2 ай бұрын
Just bought one from FB Market Place for $250.00 it looks almost new and runs great.
@ErikAsquith2 ай бұрын
That’s impressive for its age. Post and share some pictures.
@georgeslade46963 ай бұрын
So, how long after applying purple primer do you wait to apply the cement?
@ErikAsquith3 ай бұрын
You can apply the cement immediately after the primer is applied and still wet.
@georgeslade46963 ай бұрын
@@ErikAsquith thanks. 👍
@piotrkozowski83313 ай бұрын
U mnie kończy się na veryfing i device error
@piotrkozowski83313 ай бұрын
U mnie to nie działa Yamaha rx-v 671 . Nie lonczy z internetem
@nikkonikko64223 ай бұрын
If you find one, buy it! Especially the hydro one. I got one for free in 2016, it sat outside for many years prior, deck in great shape, blades all rusted up, wd-40ed it, freed it up, put some gas in, started on yhe 2nd pull, and it's been like that ever since! Quality mower
@paulelliott73733 ай бұрын
Always wear safety glasses when working with snap rings and snap ring pliers. I've seen snap rings catapult.
@mickytallent69333 ай бұрын
All I wanted was how to start
@sadeb34093 ай бұрын
They are now around 30 dollars
@trumpwon82313 ай бұрын
How many cc’s on the motor. 200?
@patrickclifford53134 ай бұрын
I checked this item on Google today I know I'm getting multiple videos this is crap
@user-qj9qy2sb4o4 ай бұрын
Can you put in a sealed wall in the basement. It’s for a kitchen sink
@ErikAsquith4 ай бұрын
No, not in a sealed wall. However, you can put it in a wall behind an access panel that will allow air flow to the AAV. The AAV will need airflow, as well as access, for when it needs to be serviced or replaced.
@BenjamiSKATE4 ай бұрын
All stihl whipper snippers are shit had nothing but problems with them
@joshuastarcher42724 ай бұрын
How long to you let the primer set before adding the glue?
@ErikAsquith4 ай бұрын
You do not need to wait at all - you can and should start apply the cement (glue) immediately after applying the primer. Avoid letting the primer dry.
@joshuastarcher42724 ай бұрын
@@ErikAsquith thanks
@joshuastarcher42724 ай бұрын
@@ErikAsquith I shouldn't use the primer and glue on rubber couplings?
@ErikAsquith4 ай бұрын
@@joshuastarcher4272 Are you referring to a "no hub coupling", like Fernco? If yes, correct, you should not use primer and cement on the PVC pipe and no hub coupling joint. A no hub coupling uses a mechanical bond by tightening metal straps to compress the rubber hub around your PVC pipe.
@tommavrakos4 ай бұрын
Why even put a vent in
@audiarcher27144 ай бұрын
What would happen if the cement was a lllllittle jellylike and you used it anyway? Asking for a friend 👀
@ErikAsquith4 ай бұрын
The chemical reaction that fuses the pipe and fitting together may not work as it should, which can result in a weak joint, that could have a greater chance as failing and leaking. But then again, it may be good enough to not fail and leak.
@nathanbecker22224 ай бұрын
Shouldn't the primer be wet when applying the cement?
@ErikAsquith4 ай бұрын
Yes, you should apply the cement immediately after applying the primer and avoid letting the primer dry.