14 сағат бұрын
3 ай бұрын
3 ай бұрын
Пікірлер
@fbwguy 9 сағат бұрын
Great explanation! Thanks
@RugerGundog 4 сағат бұрын
Glad it was helpful!
@snowman3219 14 сағат бұрын
No problems here, nothing but joy.
@RugerGundog 14 сағат бұрын
Me either. Though i will lob these on a big gun.
@fowllab 14 сағат бұрын
So the ring itself is still aluminum and the titanium is just the sliver clamp portion?
@RugerGundog 14 сағат бұрын
This is correct. That small part had a failure rate and a lot of subsequent warranty claims from hard hitting platforms.
@barryweaver6834 17 сағат бұрын
I know we have freedom of choice but isn’t running Russian ammo on Independence Day sacrilegious?
@marinevet7273 18 сағат бұрын
Didn’t hear anything about water resistance?
@RugerGundog 18 сағат бұрын
If you watch the content I've made I do test it in water as well as I freeze it in water.
@brianfox87 23 сағат бұрын
If it can't run steel its not good enough for brass😂
@RugerGundog 23 сағат бұрын
Damn righr
@pevelyhomeowner327 Күн бұрын
Wtf? Why you running that crap on Independence Day. 😢
@RugerGundog 23 сағат бұрын
That what I told him hahaahh
@MrDausen 3 күн бұрын
I bought panasonic 3500 flat top batteries for mine, seem to be good so far, running on IR auto mode, was going to try out a samsung brand next. I like how the scope has standby mode, with a touch of the power button it wakes up instantly
@RugerGundog 2 күн бұрын
Thanks for sharing
@JCulpepper73 3 күн бұрын
Is there a way to get the exploded image file like you have there?
@RugerGundog 3 күн бұрын
On the purchase page of Arken I believe.
@terrinewman5954 3 күн бұрын
I have a sh4 6x24x50 ona 308 and it works extermely well for me at 1000 yds. !
@RugerGundog 3 күн бұрын
I'm sure that it does. It's a great optic!!!
@markissboi3583 3 күн бұрын
20 60 80 vs 20 60 60 few about $120 some less im told the Bigger the lense 80mm/70mm better than 60mm say The mobile camera holder is a Bonuse Buy a remote $20 for andriod mobile phone sit back take pics record that Eagles nest etc look at moon planets saturn at nights all good
@RugerGundog 3 күн бұрын
Thanks for chiming in :)
@FC64002 4 күн бұрын
Can’t wait!!!
@RugerGundog 4 күн бұрын
Both impressive optics!
@carllarkylark 5 күн бұрын
Hi Bob. Do you know the full range of elevation clicks on the EPL4 6x24? On a Huben PCP I want to reach out to 150-200 yards. My zero i want at 35 yards. So where would you recommend, in clicks, should my 35 zero be? For optimal scope performance
@RugerGundog 4 күн бұрын
20mrad or 68moa of elevation adjustment with the Turret.
@faraci5617 5 күн бұрын
Nice!Good battle
@RugerGundog 5 күн бұрын
Two great optics
@bob4003 5 күн бұрын
I debated on getting the maven but I decided on the tract toric
@Cyborg-911 5 күн бұрын
Good jobGundog ,learnning a lot ,who said you weren't smart! Bravo Bro.
@RugerGundog 5 күн бұрын
Thanks for watching
@RugerGundog 5 күн бұрын
😀
@julianetheridge6363 5 күн бұрын
What size scope are you using?
@RugerGundog 5 күн бұрын
This is a Arken epl4. 6 to 24x
@julianetheridge6363 Күн бұрын
Would you recommend that version or the 4-16x44?
@mikedervishian5715 6 күн бұрын
I won a Zulus in a Give away ... But it did not come with batterys. Do you have any you recommend?
@RugerGundog 5 күн бұрын
I use the ones Arken provides. Are you on the Arken Facebook page? There are a few users who use others.
@bob4003 7 күн бұрын
I just bought the tract toric 👍need to make some rounds for my Bergara 300 PRC
@RugerGundog 7 күн бұрын
I've not had hands on....or eyes through one of those
@patches6309 8 күн бұрын
Just about to mount the new Arken SH-4Gen2 6x24x50mm VPR reticule on my AR-10. Went with Arkens 20moa one piece 34mm scope mounts. Hoping that can handle the recoil of 7.62 ok, as I really do not wanna make this already heavy scope more beefy with badger ordinance steel rings? I would love to see you use it on the range.
@RugerGundog 7 күн бұрын
I have same optic on my ar10. It will hold up great!
@alland1241 8 күн бұрын
If you simply leave it on your gun and use it regular it all becomes automatic very quickly, you only need to connect a phone for initial setup and updates, you're watching a tv screen so can view from any angle.
@RugerGundog 8 күн бұрын
I agree. If you use it often it becomes second nature.
@scottc3029 8 күн бұрын
That does not look like the right buffer, to long.
@RugerGundog 8 күн бұрын
The issue was an a5 tube needed. This buffer is longer as is the model for quicker cycling.
@jamessharpe5448 9 күн бұрын
MCSC!
@RugerGundog 8 күн бұрын
That's right :)
@Cyborg-911 11 күн бұрын
EPl 4 is what power Gundog?
@RugerGundog 11 күн бұрын
This is the lower smaller objective epl4
@elimarsh8435 11 күн бұрын
How would you compare this to the sightmark wraith 4k 4-32 OR the ATN 4k pro 5-20?
@RugerGundog 11 күн бұрын
I not used the ATN but have the sight mark. The zulus is much smaller and the features seem to be more refined.
@elimarsh8435 10 күн бұрын
@@RugerGundog Right, but does the factory IR shine out a good bit like the wraith does? I'm not sure how I feel about it being integrated instead of a separate unit.
@Cyborg-911 11 күн бұрын
I'm with you on the reticle scene ,seems all the scope makers are not listening to their customers,then they complain about lost sales<< Go Figure Huh?
@RugerGundog 11 күн бұрын
This can be very true
@Cyborg-911 11 күн бұрын
Good video Gundog,enjoyed it ,looks like a great setup for hunting also
@RugerGundog 11 күн бұрын
It works well. Good teaching tool for new shooters too.
@Cyborg-911 11 күн бұрын
Almost sounds like just plain old common sense,so what am I missing?/
@RugerGundog 11 күн бұрын
This particular optic has an erector inside that is a bit more sensitive to torque or distortion of the tube body if you get too close with a ring. More so than other Arkens in my experience.
@JohnDoesItAll 12 күн бұрын
I just got mine and it had a tag stating the max torque. I broke down and bought a wheeler engineering torque driver after thirty years of installing scopes😂.
@RugerGundog 11 күн бұрын
Good call!
@FC64002 12 күн бұрын
Which can is that
@RugerGundog 12 күн бұрын
TAO Gen1.
@andydowden8117 13 күн бұрын
Damn that rig is quiet .
@RugerGundog 12 күн бұрын
With better ammo it's pretty accurate too.
@faraci5617 13 күн бұрын
Tracking went well…I see you have it positioned all the way back in that mount.Is that indicative of a shorter eye relief?
@RugerGundog 13 күн бұрын
I have it back in position where i place my face on this rig. But...damn...I forgot to mention eyebox. It quite open and easy to settle into.
@flvk. 13 күн бұрын
That looks amazing
@RugerGundog 13 күн бұрын
It's a great optic. I've been impressed.
@tyler4436 13 күн бұрын
Ordered and had my Zulus within a week (to central Illinois) which was much faster than I expected. The LRF is spot on with my Vortex LRF and the night illuminator will more than suit my needs for yotes and steel. The instruction booklet is a little lacking but the countless videos on here have been a lifesaver. A few questions though - 1. how will I be notified of firmware updates? 2. when will 20 and 35 moa mounts be available in the U.S?
@RugerGundog 13 күн бұрын
Very good question on how to know about updates. I suspect if you routinely log it on it may prompt you. As for different mounts....I wish I knew also. It is a fun unit....enjoy!!
@mattking67 14 күн бұрын
Were you possibly referring to the SIG BDX system as a ballistic comparison?
@RugerGundog 14 күн бұрын
No I was not.
@ride208 15 күн бұрын
I bought a EP5 AND IT only lasted 120ish rounds of 300prc before it started to self-destinate. Not sure what the scope is rated for but its not rated for a 300prc without a brake and up IMHO. Still waiting to see what arken has to say or what they are going to do about the scope i sent in for warranty. Their scope rings wouldnt even hold the scope with their recomended torque setting of 18inch/lbs l, the scope was moving in the rings drastically, had to go up to 24inch/lbs and still not 100% sure if that was enough. Its a great scope for small caliber rifles. Really disappointed that it didnt handle better. When i get it back im going to throw it on my DD DELTA 5 IN 6.5 CREEDMOOR and see how it will do on that rifle.
@RugerGundog 15 күн бұрын
Odd. I have 2 with hundreds of 300 win mag and one I hammered hell out with air chisel. Send it back...lifetime warranty. It's rated 50 bmg.
@RugerGundog 15 күн бұрын
It's unconditional warranty. You get a new one. Odd on rings too. I have 27 set on rigs...a few magnums...all 18". I do clean optic with alcohol first and check torque from time to time. Lemme know how it works out.
@ride208 10 күн бұрын
@RugerGundog I did send it back they're sending a new one. Think I may have just got a lesser quality scope then most people have gotten. It happens. I was just surprised how it only last 120 rounds. Finger crossed this next one work. Think I might test it out again on the 300prc and test it's quality. If it comes apart again or not then I'll know for sure on this product. I have 2 others from arken and do love there product. Just like I said was very surprised. Thanks for the reply.
@jdpst20 16 күн бұрын
Then I’m assuming you can only go one way which is dialing down. Since you have a zero you can either hold at MOA or dial left or down to desired dope or range ?
@RugerGundog 16 күн бұрын
Can only spin counter clockwise....or up numerically to raise shot beyond zero.
@jdpst20 15 күн бұрын
Yeah that’s what I mean prob just said it wrong. My score was low from the factory so I had to dial UP CLOCKWISE to zero. Now with zero stop on you’re set at zero so the only way you can dial is counter clockwise so if you need to dial 3 MOA FOR say 300 yards you dial and boom you’re at 3 center hold. Then back to a 100 yard zero You can turn it blindly back to zero.
@johndewilde7422 17 күн бұрын
Would you mind clarifying your explanation at the approximate 4:07 mark if moving the reticle the bullseye will always be the center point of aim. Do you mean you're moving the bullseye location when adjusting the turrets?
@RugerGundog 17 күн бұрын
If you are using reticle adjustments to hit target it's called a hold over. So for instance if you zero at 100y, you may need to hold up on the 4th hash line for say....a 300y shot. Conversely if you rather keep the target centered on the dot in middle of the reticle you would spin the turret to 4. Using center dot of reticle and precise clicks of turret can in many cases lead to tighter groups.
@johndewilde7422 17 күн бұрын
@@RugerGundog But don't change your zero by using the turret? New point of aim?
@DigitalDesigns1 17 күн бұрын
I think I'm gonna need to add one of those on my 6.5 looks like an awesome piece. great review ..
@RugerGundog 17 күн бұрын
You should!
@faraci5617 18 күн бұрын
Looking forward to the field testing👍🏼
@RugerGundog 18 күн бұрын
Coming soon!