Пікірлер
@Jaujau933
@Jaujau933 6 күн бұрын
You must have so much patience Mick. 😱
@unclemick-synths
@unclemick-synths 6 күн бұрын
Thanks! 😊
@Jaujau933
@Jaujau933 7 күн бұрын
Good one Mick 👍
@unclemick-synths
@unclemick-synths 6 күн бұрын
Thanks for watching and leaving a comment
@pokmanlai
@pokmanlai 16 күн бұрын
I didn't do system backup but upgraded firmware. then i do factory reset, all parameters gone. no more scenes available.
@unclemick-synths
@unclemick-synths 16 күн бұрын
I am sorry to hear that.
@aarondorf8301
@aarondorf8301 18 күн бұрын
Very nice! New sub and big like!
@unclemick-synths
@unclemick-synths 18 күн бұрын
Thanks for watching and the sub
@bcsnapier
@bcsnapier 21 күн бұрын
After cleaning the mouthpiece of a Roland Aerophone Pro, it is generally recommended to recalibrate the instrument. This is because cleaning the mouthpiece can slightly alter its position or the pressure sensors' sensitivity, which can affect the instrument's response.
@unclemick-synths
@unclemick-synths 21 күн бұрын
Thanks for watching and leaving a comment. A good reminder for those who use the calibration.
@andersbostrom3745
@andersbostrom3745 Ай бұрын
I have tried 3 different USB C flash drives, and the ae30 tells me the memory is not ready to initialize. Which flash drive do I get?
@unclemick-synths
@unclemick-synths Ай бұрын
What size is it? I believe it must be 128 GB or less and formatted FAT32. I use an old 2 GB USB with an adapter to USB C. The files are very small.
@sussanbeaverson9127
@sussanbeaverson9127 Ай бұрын
I play the Oboe. I am wondering what you recommend for a "perfect in your opinion" settings for Oboe?
@unclemick-synths
@unclemick-synths Ай бұрын
Hi there, thanks for stopping by and leaving a comment. Unfortunately the only thing I know about the oboe is that it's a double-reed instrument. The AE has alternative fingerings that you could customize. Which would be closest to the oboe; recorder, flute, or clarinet? If you're not already a member, I thoroughly recommend joining the iSax group on Facebook because there are some very knowledgeable people there (including classical musicians) who might be able to give you better guidance because I've always stayed with sax fingering.
@marcswake6873
@marcswake6873 3 ай бұрын
Great video. Many thanks.
@unclemick-synths
@unclemick-synths 2 ай бұрын
You're welcome
@carlosg.bermudo9638
@carlosg.bermudo9638 3 ай бұрын
Dear Mr. Mick, it is wonderful that you shared so much knowledge about the AE-30 and A-20!!! Thank you for doing so. Finally I can understand how to edit and manage my Roland A-20. Please make more videos, you make it so easy to understand this wonderful but uncharted instrument. Roland should have hired you from day one of the release of the AE-30. All the best!!!
@unclemick-synths
@unclemick-synths 3 ай бұрын
Thank you for watching and leaving a comment. I am pleased that you found my video helpful.
@teftymusictech
@teftymusictech 4 ай бұрын
Hey Mick! This makes me wish I could play wind instruments 👀 Awesome expressibility!
@unclemick-synths
@unclemick-synths 4 ай бұрын
Hi Tefty! Thank you so much for coming by to check out my video. It takes a little bit of setting up but the expressive capabilities of the AE-30 are so nice to have whether as a MIDI controller or attempting to make ZEN-Core submit to my will 😀
@matchem9178
@matchem9178 5 ай бұрын
Thank you !!!
@unclemick-synths
@unclemick-synths 5 ай бұрын
Thank YOU for watching and leaving a comment
@adamofathens
@adamofathens 5 ай бұрын
Really appreciate the deep dives on both vibrato and motion controls. This gives me lots on new ideas to try out. Please keep these videos coming. There is no one else I know that is making content like this: slow, detailed examinations of the finer details of the Aerophone.
@unclemick-synths
@unclemick-synths 5 ай бұрын
Thanks again! I'm researching the next video - next up is on the Parts "layer". I thought it would be an easy one but there are many possibilities for layering, cross-fading etc.
@adamofathens
@adamofathens 5 ай бұрын
Wow yeah that's what I'm working on now: trying to use the 4 different "partials" or layers and crossfading between them to emulate guitar techniques like palm muting and pinch harmonics. Hopefully the end result is that I can play a regular note on my AE-30 and hit the palm keys to quickly crossfade to sounds that will emulate these guitar techniques. @@unclemick-synths
@adamofathens
@adamofathens 5 ай бұрын
Thanks! Your explanation of the effects is really helpful. I have not ever thought of using them in this way. This will really help me as I am designing a number of sounds on my AE-30 too. I will definitely give these effects a try as they seem to add something I've been missing in my own sound designs.
@adamofathens
@adamofathens 5 ай бұрын
Thanks for making this. The pacing is slower than the usual KZfaq video, and that's a refreshing change. I liked being able to slow down and hear about your thought processes on sound design. Cheers! AE-30 player/synthesist from Georgia, USA.
@unclemick-synths
@unclemick-synths 5 ай бұрын
I'm glad you enjoyed it. Thanks for watching and leaving a comment.
@adamofathens
@adamofathens 5 ай бұрын
It's interesting to see how people did synthesis in the past, and sometimes old methods are useful today. Thanks for sharing!
@unclemick-synths
@unclemick-synths 5 ай бұрын
There are a lot of things that get forgotten. I found Lewisohn's book on the Beatles sessions eye-opening because to them a four track recorder was four times as good as a mono tape deck so they applied "direct to mono" recording techniques to each tape track. However, me being influenced by over-dubbers like Mike-Oldfield and Jean-Michel Jarre, I viewed my four track recorder as a mere quarter of a 16 track recorder. A very different perspective!
@adamofathens
@adamofathens 5 ай бұрын
Enjoyed that! Cheers!
@JUANORQUIO
@JUANORQUIO 5 ай бұрын
That’s Incredibly Awesome! Have A Lovely Week! 🤗❤️✨
@mazig8
@mazig8 6 ай бұрын
Thanks for the detailed look at this accompanying app! Do you need to plug the aerophone to you phone in order to make scenes and change things so you can test in real time? Or are you doing all of this with Bluetooth connection?
@unclemick-synths
@unclemick-synths 6 ай бұрын
Thanks for watching and leaving a comment. Yes, I am doing all of this with the Bluetooth connection. As far as I can tell Bluetooth is the only mechanism for connecting the app to the Aerophone.
@georgechiukaraoke8278
@georgechiukaraoke8278 6 ай бұрын
Thank you very much . Your instruction is very very clear, and easy to understand. But I still have some questions. (1) Is there any method to control fade-in vibrato time ? I don't like to play the instrument every note from the very beginning to the end with vibrato. If there is a mehod to control fade-in vibrato time (for example, 100 ms... or so), I guess the sound would be more natural. (2) What is "cut-off" ? and what is MFX effect ? This is my kowledge problem, not your fault. Your tutorial is perfect ! Thank you.
@unclemick-synths
@unclemick-synths 6 ай бұрын
Hi George, thanks for watching and leaving a comment. 1. Yes, you can set the Vibrato Delay in the Scene/Offset pages of the app (refer to the Parameter Guide). Unfortunately you will have to set this for each Part in each Scene that uses the automated vibrato. I will be covering those menus in my next video. 2. Cut-off frequency is a feature of a low-pass filter. It controls the brightness of the sound. In the video I was controlling it with Elevation and Breath. 3. The MFX effects are a set of effects that you can use on individual Tones in a scene. If you haven't watched them already, I recommend that you watch my first two videos in this series: Make A Scene and Fake Recorder.
@robertbrowne7880
@robertbrowne7880 6 ай бұрын
I've been looking at these for about a year and last week they went on sale. That was all the excuse I needed. This is the first channel I've seen with anyone sound modelling. Subscribe and thanks for the walk through of making scenes.
@unclemick-synths
@unclemick-synths 6 ай бұрын
Hi Robert, thanks for watching and leaving a comment. I hope you have many hours of fun with your Aerophone.
@yanickalmeida7983
@yanickalmeida7983 6 ай бұрын
Thank you, you've saved me so much time with this video
@unclemick-synths
@unclemick-synths 6 ай бұрын
Thank you for watching and leaving a comment. I'm glad you found it helpful.
@Belas_Photography
@Belas_Photography 7 ай бұрын
Hi Mick. I use my AE30 with an Android tablet, and am unable to rename a modified scene when using the Editor app. I wonder if you have ever seen this problem or have any thoughts on how it might be fixed? (I've tried rebooting the AE30, repairing both AE30 and tablet.) I have no problems saving and renaming directly from the LED screen on the Aerophone, just through the Editor app. Thanks in advance for any help you may offer. Love your channel.
@unclemick-synths
@unclemick-synths 7 ай бұрын
Hi there, you should be able to rename when you save (I demonstrate a save in the first tutorial). One thought... you are saving to a user slot, right?
@Belas_Photography
@Belas_Photography 7 ай бұрын
​@@unclemick-synths I solved this problem, but you'll never guess what the problem was. When I went to rename the scene, the "OK" box grayed out, which on every other application I've used indicates it isn't functional. However, that is not the case with the Editor. With the "OK" grayed out, I made changes to the name, clicked the "OK" which was still grayed out. The "OK" then went back to normal white. I clicked the "OK" button a second time and it stored the renamed file. Not the behavior I expected, but I can work with it. Thanks for your help.
@unclemick-synths
@unclemick-synths 7 ай бұрын
I'm glad you got it sorted out. The app isn't perfect but when I checked out the documentation for other ZEN-Core products I realized we're fortunate to have the app!
@Belas_Photography
@Belas_Photography 7 ай бұрын
@@unclemick-synths Yes, it's better than nothing. By the way, have you ever modified the partial (wave) files that make up an instrument? It appears they are editable, but I don't recall ever hearing of anyone doing so. This is just an idle curiosity at the moment, but might be something I'll pursue in the future.
@unclemick-synths
@unclemick-synths 7 ай бұрын
I will be getting down to editing the partials and choosing the waveforms but I don't think there's a way to edit the actual waveforms themselves. I know it's now possible to import sample files from some Roland keyboards but I'm not sure if that's restricted to the AE-30. Once I've finished digging through the AE's other features I'm going to look into the possibility of converting samples from other sources because I have no interest in Roland's keyboards - the AE-30 gives me all the ZEN-Core I need and consequently other synths are higher on my wishlist.
@Belas_Photography
@Belas_Photography 7 ай бұрын
Nicely done, Mick. Is it just me, or do others have difficulties pressing the 2Oct-Up and 2Oct-Down while simultaneously powering up the AE30? I swear Roland wants us to be contortionists too. :)
@unclemick-synths
@unclemick-synths 7 ай бұрын
Thanks! No, it's not just you! There are a number of aspects of the design that could have been done better.
@Belas_Photography
@Belas_Photography 7 ай бұрын
Thank you, Mick. Up until your video, I didn't know that a long press brought up a numeric keypad! That one bit of extremely useful information made your video priceless. I hope you will consider making more videos on the inner workings of the Aerophone and its Editor.
@unclemick-synths
@unclemick-synths 7 ай бұрын
Thanks so much for watching and leaving a comment. I'm glad you got something useful out of it. Part 3 Taking Control is out now.
@synthseeker
@synthseeker 8 ай бұрын
Nice job sir! Please carry on and make more videos of your performances. I look forward to the notifications!
@unclemick-synths
@unclemick-synths 8 ай бұрын
Hi Luke, thanks for dropping by. Yes, I need to do some more jams.
@synthseeker
@synthseeker 8 ай бұрын
Not only do you PLAY...you also TEACH! That's great Mick! I'm so glad you spoke up and I met you! While I personally don't play a wind instrument, I play a few other things. ;) I appreciate the effort it takes. Off to dig around your channel! Talk to you later.
@unclemick-synths
@unclemick-synths 8 ай бұрын
Hi again Luke, this one was a monster. Not only was there a ton of research to condense but everything that could go wrong went wrong all the way through production! Still I'm hoping it enables people to get their teeth into the Aerophone. Yep, I'm glad KZfaq finally decided to share your channel with me. A guy I jam with has an eye-watering amount of Eurorack so I sent him a link to your Berlin tutorial and we'll give it a try.
@kitechvo4376
@kitechvo4376 8 ай бұрын
Thank You very much 🎉🎉🎉
@unclemick-synths
@unclemick-synths 8 ай бұрын
Thanks for watching and letting me know. It encourages me to keep going with these videos.
@kevanbarrett7411
@kevanbarrett7411 8 ай бұрын
Thanks for this. Just followed it to update to 1.22 and all good.😊
@unclemick-synths
@unclemick-synths 8 ай бұрын
Excellent 👍. Thanks for letting me know.
@DisciplinedCommotion
@DisciplinedCommotion 9 ай бұрын
Ayup Mick, I haven't the patience for filling in patch sheets definitely not making notes, I have taken photos of a couple, but never gone back to them. The synth you built looks interesting do you still have it? I have been looking for a synth kit, but not found anything like this, what's it called? I would like to see a video on that Midivolts gadget. Thanks Tim.
@unclemick-synths
@unclemick-synths 9 ай бұрын
Hi Tim. Thanks for stopping by. Yes, I find the photos lose context so easily. I never figured out a way to overcome that. I do still have the synth - it's a Clef B30 Microsynth. The keyboard was very unreliable so I started building a CV input (it's not 1V/octave) but stopped when I got the Neutron. I did start a video on the MidiVolts but got such a good response to the videos on programming the AE-30 that I'm focusing on that for the next few videos. Thanks for reminding me I already started the MidiVolts video, I'll try to make it the next one after I finish this series.
@DisciplinedCommotion
@DisciplinedCommotion 9 ай бұрын
@@unclemick-synths thanks for the info
@JUANORQUIO
@JUANORQUIO 9 ай бұрын
Bravo 👏🏻! That’s Incredibly Cool! Have a great weekend! 🤗❤️✨
@unclemick-synths
@unclemick-synths 9 ай бұрын
Thanks for watching and leaving a comment
@garryfreemyer7187
@garryfreemyer7187 9 ай бұрын
The thumb drive must be formatted figured to fat 32 by the way. I figured out how to update the firmware without a thumb drive. Instead, I used an external ssd drive formatted to fat32 and put the bin file on that instead. It worked great! If you try to format a non fat 32 formatted drive in the roland, it will say Drive not ready.
@unclemick-synths
@unclemick-synths 9 ай бұрын
Thanks for the tip!
@pinzindin9520
@pinzindin9520 10 ай бұрын
very good tank you
@unclemick-synths
@unclemick-synths 10 ай бұрын
Thank you for watching and leaving a comment
@akmclemore
@akmclemore 10 ай бұрын
Great video! Wanted to stop by and show support!
@unclemick-synths
@unclemick-synths 10 ай бұрын
Thanks so much for watching and leaving a comment. It encourages me to finish the next episode - lots of editing in this one!
@dankeplace
@dankeplace 10 ай бұрын
Hey just posting here regarding SP. I know you can't stand him and you did encourage his positive posting, it's nothing but a mask, he does this with Tim as Tim has shut him down a few times now. Tim is his last big channel that John posts on due to all the abuse he has given out to other channels. If you never saw the last SS stream, have a look and see how he behaved, John then turns on Nick because Nick never thanked John for the donations. Nick did, but by accident, but John wanted to control the show with anti Behringer discussions. Everything John does is negative, unless it's about himself. The comment I left was outing his fake subs, he was getting 100 per day, has grown his channel from 300 to 2.9K in less than a month, but he blames other people for doing this. This is his 23rd account, has had multiple DMCAs filed against him, his most recent one was with Espen Kraft. Even one of John's subs attacks Espen without knowing who he is, but Espen's friend pulls this sub up and an interesting exchange is made. John just likes stirring the pot, he has no positive bone in him.
@unclemick-synths
@unclemick-synths 10 ай бұрын
Fair point.
@dankeplace
@dankeplace 10 ай бұрын
@@unclemick-synths not trying to stir up, trying to make everyone avoid him, he wants to be the good guy being picked on, which is opposite of reality.
@johnjenkins2315
@johnjenkins2315 11 ай бұрын
Hello from New Zealand. I’ve just came across your post and I am a alto sax player. I’m going to check out Aerophone Pro tomorrow after coming across (not only your video) but also others I have seen. It certainly wets my appetite for EWI created music. I look forward to seeing more of your work. Cheers John
@unclemick-synths
@unclemick-synths 11 ай бұрын
Greetings - I have a cousin in Tokoroa. If you haven't already, check out Alistair Parnell's iSax channel. I love the AE-30 - the motion controls and thumbpad really help add expression. My next video will dig deeper into that. Thanks for watching and leaving a comment.
@johnjenkins2315
@johnjenkins2315 11 ай бұрын
@@unclemick-synths funny you should mention about Alistair Parnel, as I was just watching his channel earlier today. As for your cousin in Tokoroa that’s a bit up country from where I live, just goes to show how small the world is in some ways.
@davidbartholomew6856
@davidbartholomew6856 11 ай бұрын
Thanks for this Mick. Great to see you pushing back the boundaries on what the Aerophone can do and its inspiring me to take a look at the back of my Modal Cobalt8 synth and see what connections can be made. More vids like this please. Can the AE30 trigger arpeggios and sequences on the Neutron ?
@unclemick-synths
@unclemick-synths 11 ай бұрын
Thanks for watching and commenting David. I haven't tried it yet but in theory I could use my Korg SQ-1 to sequence the Neutron using CV and then transpose that by inputting MIDI to the Neutron from the AE-30. Thus far I haven't found a way to have the AE-30 transmit more than just the notes I'm playing but now I'm digging deeper into the Aerophone's capabilities it would be very cool if it could do that.
@unclemick-synths
@unclemick-synths 11 ай бұрын
...and I hope you have success with your Cobalt8. It's a lot of fun trying to see what works and getting different sounds that the Aerophone sound engines don't give you. I wish I had more time!
@davidbartholomew6856
@davidbartholomew6856 11 ай бұрын
@@unclemick-synths The Cobalt is a great synth but it doesnt look like I can play it from the AE20 😢. There is an option to send the AE20 signal through the Cobalt's AUX and use the synths on board effects section which is fun and means that delays can be time locked with sequences. The AE20's delays etc are really good but I prefer to use hands on effect treatments instead of adjusting stuff in the app so I run the Aerophone through a TC Helicon triple echo box and a Strymon Big Sky. Lotsa fun to play with all this stuff. Its so relaxing and calms the soul during turbulent times. Keep on posting and inspiring Mick.
@unclemick-synths
@unclemick-synths 11 ай бұрын
Yep, definitely relaxing. One of the challenges I face trying to make videos is I find something interesting and end up spending the rest of the evening playing instead of working on the video! 😀 It would be nice if someone discovered a USB-MIDI to MIDI adapter that is guaranteed to work with the AE-20. Not having the 20 myself means I am reluctant to recommend one in case I'm wrong. Have you tried going via a computer or tablet? I guess the other factor is how wind synth friendly the Cobalt is - I don't have a Cobalt myself. A lot of synths won't let you avoid the envelope generator. I plan to make some more videos about controlling external hardware but those will have to wait until I finish the series about the AE's internal sound capabilities.
@davidbartholomew6856
@davidbartholomew6856 11 ай бұрын
Thanks Mick. As a new owner of an AE20 this video was really helpful. Looking forward to seeing more posts.
@unclemick-synths
@unclemick-synths 11 ай бұрын
Thanks for watching and leaving a comment. I'm glad you found the video useful.
@DisciplinedCommotion
@DisciplinedCommotion 11 ай бұрын
cool playing, I don't have one of these but still an interesting tutorial
@unclemick-synths
@unclemick-synths 11 ай бұрын
Thanks for watching and commenting. The next video will get into using the controls to manipulate the sound - it's quite a beast.
@DisciplinedCommotion
@DisciplinedCommotion 11 ай бұрын
@@unclemick-synths i should catch because I've subscribed
@JUANORQUIO
@JUANORQUIO Жыл бұрын
W❤W! That’s Incredibly Awesome! Cheers!🥂❤️✨
@juana.velazquez9286
@juana.velazquez9286 Жыл бұрын
Great Have you done changes to the vibraphone scene, to make it more realistic. Where I can start? Thanks
@unclemick-synths
@unclemick-synths Жыл бұрын
Thanks for watching and commenting. No, I haven't experimented with the vibraphone. To be honest I don't use the SuperNatural or tuned percussion scenes on my Aerophone. What aspects of the vibraphone scene don't seem realistic to your ears? I often find a subtle "small room" reverb helps make drums sound more integrated so you could experiment with the reverbs.
@stephenterrones3561
@stephenterrones3561 Жыл бұрын
Hi, thank you for teaching us something about the pro Aerophone editor. I learned something. Please give us more lessons on the editor bc there is not much available.
@unclemick-synths
@unclemick-synths Жыл бұрын
Thanks for watching and leaving a comment. I hope to have the next one finished soon.
@Sulfurico
@Sulfurico Жыл бұрын
Awesome setup 🎹👌
@unclemick-synths
@unclemick-synths Жыл бұрын
Thank you
@Sulfurico
@Sulfurico Жыл бұрын
@@unclemick-synths🤜🤛You have very good music and tutorials 🎶👌, if you come to my channel I hope you like the music I make, greetings from Ibiza.
@petervroon
@petervroon Жыл бұрын
Thanx
@smallalien5860
@smallalien5860 Жыл бұрын
Good show.
@unclemick-synths
@unclemick-synths Жыл бұрын
Thanks for watching and leaving a comment
@baronvonmaximillionsnell2757
@baronvonmaximillionsnell2757 Жыл бұрын
Can you do a video on making a Indian flute bansuir on the Roland AE30?
@baronvonmaximillionsnell2757
@baronvonmaximillionsnell2757 Жыл бұрын
Can u please do a video on a Arabic scene for the AE 30 Roland. I kind of desert wind, but with synth in it..Cool and middle Eastern tone or a Indian flute...Like in the in Asia.
@mannytuzman3461
@mannytuzman3461 Жыл бұрын
Great info... Please share how to lessen the lower jaw distance on the reed. I opened it too much.... now cant lessen it.
@unclemick-synths
@unclemick-synths Жыл бұрын
Hi Manny, thanks for watching. Is it just one Scene with this problem or all of them? If it's all of them, I would take a look at page 4 of the Parameter Guide. I suspect the Bend Range Bite Dn setting is too big. You adjust that on the instrument. If not that, it could be the Bite Calibration. Alistair Parnell has an excellent video on calibrating the bite on his iSax channel. If it's just one scene affected, see page 25 of the Parameter Guide for info on setting the Bend Range Bite Dn parameter. You adjust that in the app. I plan to look into that in a future video.
@kentechno
@kentechno Жыл бұрын
Hi Mick.😀 I've never used an Aerophone, but I think it's a very attractive instrument for those who know how to play the saxophone. There is a professional band in Japan called Square and the saxophonist uses AKAI/EWI4000s. Anyway, it's wonderful that the synthesizer's tone can be expressed as smoothly as a saxophone.👍
@unclemick-synths
@unclemick-synths Жыл бұрын
Hi Ken! Thanks for leaving a comment. The Aerophone is great. I am so glad I learnt to play saxophone!
@unclemick-synths
@unclemick-synths Жыл бұрын
Have you created any Scenes for your Aerophone?