And a ventus 6x black would blow them away 😅😂😊

Or until September when the 925’s appear in Satin! 🙄

I got rid of my 923 Tours because I hated the shafts I chose in favor of the T100 and I definitely regret it. The T100 are comparable in performance, but do not feel nearly as good and don’t have as much spin

It’s a great set for sure! But the real question is… which set is in your No. 1 spot ? 👀

@@dannyv3098 Appreciate the support Danny! I always look at lofts in terms of filling an 11 club gap between your driver and highest lofted wedge. Usually the issue with bending a club (mainly short irons) strong is you create too big of a gap in your wedges. That said, if the gapping works out in the wedges and you don’t have too much of a yardage congestion in your longer clubs, I think it’s totally fine.

@@georgemaurice9179 I’m actually planning on a Broomstick vs. Standard style putter vid in the future! That said, I’m torn on which models to go with… Would you prefer to see a DF3 standard vs. a Mezz.1 Max broomstick, the same models or two other models?

@@TheEquipmentJunkie The Broomstick with a Mezz. Max and the DF3 I lean to the Mezz, but I am open to either, as I am sure that others are.

Thanks much Andrew! Have you considered the T150 at all? I am planning on a 243 vs. T150 comparison video here in the near future. That said, I may also work on a 243 vs. BPS video as well…

The T 150 is a nice feeling iron too. I’m looking for a one piece fully forged club but look forward to your next vid. Would love to see you compare the 243’s v the Blueprint S!!

@@erflog At some point it really is like splitting hairs… I think I could easily play the 243, JPX or 241 in that club, but I do like to nitpick and point out the small details/differences I notice. I guess I’m just an Equipment Junkie at heart! Have you had a chance to test these? I’m curious how you’d build out your set.

I’m shallow and I prefer a sharp edge.

Definitely something I’m looking into testing in the future… I’m now back in Illinois with firmer turf and plan to put the Z-Forged II vs. the Mizuno Pro 241 in a video. Is this one you’d like to see?

Appreciate the support as always!

Never had a chance to test the 57’s but they look clean! What do you prefer about those to the current 240 lineup?

Great question! I did actually test the 5i in this video; That said they are just a bit hot for me in terms of ball speed (even in the 5i), so it wouldn’t have made sense to test them for my personal setup in the 6/7 irons. I did test the 245 in PW, 7i and 4i in my full review of the 240 series a little while back. Link to that video here: kzfaq.info/get/bejne/atKVYKdhmeC7iGQ.htmlsi=1PqnZof_2Giyz9MN

@@TheEquipmentJunkie thanks

You read my mind! That video should be coming in the next week or two. Which one are you taking to win?

Could also do a nice combo set w Srixon, same test would be cool

I absolutely love both of them just in different ways! I’m working on a Z-Forged II vs. 241 video here soon to decide my overall winner… Hopefully out in the next week or so! That said, which one would you take?

@@TheEquipmentJunkie being a steeper player I’ve always preferred the V-Sole so I’d lean MKII Looking forward to the MKII vs 241 video!

The new Miura Contender myself, maybe … $$$$$.00

Those things happen! Unfortunately when it comes to fitting it’s very easy to chase launch monitor numbers which don’t always transfer to real world conditions. (It’s one of the main reasons I test clubs outside). That said, I think you’ll be really excited about some upcoming Taylormade clubs… :) Stay tuned to the channel in the near future !

I’d love to work on some Callaway content! Unfortunately right now I don’t have much of a relationship with them and am unable to get product to test. That said, continuing to support the channel and helping TEJ grow could definitely open this door in the future. And I do hope that door opens, as I’d love to test a bunch of current and upcoming Callaway products!

Welcome to the channel and thanks for your support!! If there’s any specific reviews you’d be looking to see in the future, I’d love to know!

@@TheEquipmentJunkie thanks for replying! You've probably already got this planned but seeing the Wilson irons in the combo set series (blade, CB and dynapower forged) would be awesome. Also for the Taylormade set I know you mentioned at the start why you left out the P7MBs but they've always seemed a lot more playable than the TWs, be interesting to see an comparison video of the P7MB Vs the P7TW

@@doggoronnie3387 I played the ‘19 Staff Model blades for a long time, so I am hoping to get a video done on those and the CB’s at some point in the future for sure! As far as the TM’s, I do agree. While I thought it would be cool to test the TW’s for viewers, I think most people would likely play the P7MB looking back on it. So that’s an unfortunate error on my end. That said, stay tuned as there might be some new Taylormade stuff coming soon you will be interested in 👀

@@TheEquipmentJunkie sweet, look forward to more TM stuff coming soon! I put a Qi10 7 wood in the bag this year and it's been unbelievable

Thanks as always Scott, your support really is appreciated!! The 0317 CB/T/P combo set sounds phenomenal. Truthfully, everyone is making super solid products right now; So while you may be tempted to test others, I think those PXG’s will stack up to pretty much anything out there. Hearing rumblings of a that new JPX line you mentioned as well as possibly some new stuff from PXG 👀 Excited to get testing once they are all available!

Yeah PXG I heard no more goo in their 0311 line and also new weight designs JPX is always exciting when Mizuno launches new sticks. I think it’s going to be an exciting fall to say the least. Lots of good products out and more coming. Here’s one, you testing Titleists new GT driver when that drops against your Qi10. Drop da mic….👍🏻💣

@@scott48 Stay tuned for August 1st and I think you’ll see some content you are looking for 👀

I’m still going back and forth between 0317 T/CB and T150’s. Pillow fight.

We should see a new “925” sneak preview soon from Mizuno. Usually around The Open Championship. 👍

I got fitted 3 months ago and my top two performing of the 6 I was handed were the 923 forged and the p790. I ultimately went the 790s because I’ve always had TM clubs, but I absolutely loved the 923. Had I went into it without knowing what I was handed and went with feel and numbers, I probably would have went with the 923s. Such an awesome club and I wish my fitter was a bit better, cause I was handed clubs from players to players distance. I probably should have gone with a combo set. Atleast in regards to the TM, I easily could have gone 790/770 or even 770/P7MB or MC. I do better with narrow clubs, I feel even my 790s are way to wide for me. My first set of irons 30 years ago, were ridiculously thin and I never had an issue hitting them. I’d actually like to measure them and see what modern club would have similar head size

Thanks for the support Brian!! I’m excited to test out the new JPX Forged model once it’s available here, hopefully in the next few months or so! Did you consider a Tour/Forged combo set when you built out your irons?

@@TheEquipmentJunkie To be honest with you I would’ve liked to have taken the tours in 8-PW but I love the forged all the way through. Don’t think the difference would be night and day for me, personally. Plus, the added forgiveness helps make this game we love a bit easier on me!

@@TheEquipmentJunkie Quick question, when you say test new forged are you talking about the 2025 model???

@@brianfuller1818 Extra help is extra help, so can’t blame you at all for going forged top to bottom! Just based off of Mizuno’s release cycle, yes we should be seeing/testing a new JPX line this fall/winter or early 2025 👍

Absolutely love that Gary! The 245 seems like it would flow really nicely into the Fli-Hi based on size and offset. Then having that PXG to keep low off the tee is a really fun bag setup ! Do you play a 3W and driver or something different to round out the set?

@@TheEquipmentJunkie At the top end of the bag, I have a TSR3 driver and waiting for the Callaway Mini Driver to arrive. I never hit a 3 wood off the deck and after a swing change that helped my driver swing, it messed up my 3 wood swing off the tee so switching to a Mini Driver now as I'll put a similar swing with it as my driver. I also have a Paradym Super Hybrid (3 hybrid) that I'll be alternating with the 0317X utility.

Those sound like some crazy conditions! I actually just made a new video where I build out a Mizuno 240/JPX combo set, so definitely recommend checking it out! Cool idea could be adding a 3 iron into the rotation to keep under the wind. Let me know what you think of the video and hopefully it helps answer that question 🙌

That’s always the usual trade-off with putters! Either hit the line easier or hit your speed easier. Lots of arguments on what’s best, but I’ve always felt great putters focus more on speed vs. line. What putter are you currently gaming right now?

EXACTLY! The issue with the DF3 is I just keep messing up with the distance compared to other modern putters. But my wife played her best rounds yet with it.

Everyone online has been complaining about Taylor made quality control being horrible lately

I hear that a lot! What specs did you go with (finish/alignment/color) ?

SIM UDI is a beast! Have you had a chance to test either of the new P UDI/DHY models? If so, what did you think?

@@TheEquipmentJunkie I have not. I just cracked the face on SIM UDI. So I have a back up head I’ll put on. But - I do have a Takomo 2 and 3 iron head to test as well. Once I get numbers I will probably check the new Taylormade stuff.

They make some great stuff and yes, tons of free agents using Cleveland/Srixon! Jason Day has since switched into the P770's, but is gaming RTX6 wedges currently. Are you currently gaming Srixon's? If so, which model?

@@TheEquipmentJunkie jason using the zx7 5 to pw been using the last couple months unless he change again at last event...

Thanks as always Scott! WITB is coming soon both on here and Instagram, so you'll see what I am currently gaming shortly! That said, I'm considering putting the 241's in a head to head test vs. the Srixon Z-Forged II here on KZfaq... Is that a video you'd like to see?

@@TheEquipmentJunkie I’ll be your caddy…

I haven't been able to get into a deep test between the 1st and 2nd gen models, so couldn't comment unfortunately. That said, I'm really curious what the new model looks like in 2025! Are you currently gaming the ZX7's?

@@TheEquipmentJunkie i have a set of gen 1 ZX7 but I also have other sets of irons

TM was a 3i bent to 19*, Mizuno 3i @ 19*, PXG was the "X" iron @ 18* and Srixon was a 2i @ 18*. As mentioned in the video, unfortunately not all companies' stock DI lofts match up.

Glad you're enjoying them!! Is there any specific tests/reviews you'd like to see in the future?

Thanks for the comment! Strike locations were pretty much right in-line with the CG on the solid strikes. Any shots that I, "low faced" were simply swing errors that I do not believe are related to tee height.

It's absolutely superb! A very close 2nd to the Mizuno IMO and likely ahead of it if you are just looking for a "driving focused" style iron (which it appears you are). What does your setup look like spec wise?

@@TheEquipmentJunkie mkII 3, recoil dart 91 gram “S” 250-260 yards if I smoke it, but typically a 230 club with a smooth swing, which is what I aim for. It bridges the gap between my zx7 5 iron and my 3 wood

At the current pricing it's one of the best deals on the market currently IMO! I may do a video focused around budget drivers in the future, is this something you'd like to see? If so, which models should I include?

@@TheEquipmentJunkie yes please that information would be very useful as I just started as a new player !

Thanks for the comment! I don't have club speed numbers with the 2/3 irons unfortunately, but last time I looked at driver I was around 116-118 MPH. Because the Fli-Hi is so easy to launch, it's possible I would match my iron shafts and go a little heavier/softer. That said, if I was looking for it to be more of a driving style club, I'd actually likely consider the Srixon with a lighter/stiffer graphite option (I find this head lower launch). What is your current driver swing speed and what shaft are you liking in that club at the moment? Or if you aren't in love with the driver shaft, what iron shafts are you liking at the moment?

@@TheEquipmentJunkie I'm just under the 100 since Ive gone to a shorter back swing, I have an older XXIO 9.5 with a 45g S ,( I'm looking to go to a 55-60g with an X S but having said that, This driver got me the longest drive win 3 years in row, the last one was in Feb this year, at Cape shanck, Vic Australia, 13th hole on that day was playing at 310m, it rolled onto the green. I did go Full on swing, Just on that hole, had a point to prove. I've also just bought an Epic max with 60g S, I get more forgiveness but I'm not sure about distance now that it's winter. 3 wood is an old Tour E Bazooka HT max D with a 65R extra inch longer, Hard to replace,This bloody thing is crazy, best I've hit this was 288m, ye great roll,bit of a wind assist, but the best baby draw. Don't normally carry a driver in winter here because of this 3 wood. and because of this I've picked up at least 6 3 woods to find one that is better and to possible replace my driver all together, no luck yet, even bought the Krank 3wood 13* again, winter is hard to get big numbers while playing in damp fairways and 12-15c(53-60F) Bazooka is still in the bag. the Srixon Z785 5 Iron with the 105 steel. =180m . I also have an old Callawy XL 5Iorn with a 130g S Shaft, that bumps it up to 200m hoping the Fli Hi 2 can give me the 220m I need to get on the par 5's in two.

I prefer my 2 Evnrolls (5.1 & ev12) better as well.

Thanks for the comment John! New video drops tomorrow where I build out my ultimate combo iron set using the ENTIRE current Mizuno players irons lineup, so stay tuned for it!! That said, I think I'm going to film a Mizuno Pro 241 vs. Srixon Z-Forged II Blade Battle video! Is this something you'd like to see?

Yes! I just saw those the other day and they look like a great and possibly more forgiving blade. Looking forward to it!!

Mizuno really knows how to make a utility iron! Are you currently gaming the new Fli-Hi? If so, what specs did you go with?