2006-2010 X3 E83 vibration problem solved

Рет қаралды 20,875

2 жыл бұрын

My 06 BMW X3 (E83) has a bad vibration. In this video I am diagnosing the problem as well as replacing defected part.
Tips appreciated
Cash app $onlinePolice
venmo @mr-viktor

Пікірлер: 31

@robinchampion 2 жыл бұрын

Very well filmed, with clear explanations. Thanks for taking the time to do this, it's very helpful.

@mrOnlinePolice 2 жыл бұрын

Thank you. Good luck to you with your project

@joeespisito9200 Жыл бұрын

Love the ending , very informative.... Hope it was fixed

@mrOnlinePolice Жыл бұрын

Sorry. Yes. As video title suggests, it was fixed.

@nadk8886 Жыл бұрын

Great video. Very informative. Thanks for uploading 👍🏼

@mrOnlinePolice Жыл бұрын

Thank you.

@Dr_Dungheap 10 ай бұрын

Thx for the video! Had the same problem with my '05. Didn't want to wait for the new drive shaft, so I just replaced the failed u-joint. Since it's riveted together one has to get creative. Used tack welds to hold new u-joint. It was supposed to be a temporary fix, but since it's been there over two years, I'd call it good enough for me.

@mrOnlinePolice 10 ай бұрын

Oh wow. What supplier did you use for a new u joints? Do you have a part number?

@Dr_Dungheap 10 ай бұрын

Sorry no part number.. It was a general size tho, used in some Mercedes models too. Just take the measurements or joint to a parts store. Have to be careful to center the new u-joint within the forks. Probably wont be as balanced, as a new shaft assembly, but good enough for a daily driver. Cheers.

@duneeda1234 Жыл бұрын

also check for a broken rear spring .......i had this ,,,vibrating at high speed and a bit of clunking at small maneuvers .

@mrm99999 Жыл бұрын

Why is BRAKE poping up on your dash? Anyway great video I will need it do it myself, mine car is not that clean as yours is, on mine there is rust everywhere

@Onelove_011 2 жыл бұрын

Great video! Can you list the source of the new shaft? thanks.

@mrOnlinePolice 2 жыл бұрын

Thank you for your feedback. I bought it on ebay. It was a seller who does not specialize in auto parts. I offered $200 for it, and seller agreed. Otherwise it's anywhere from $270-$400 range. They could be fully serviceable/greaseable or not serviceable at all.

@ytfeverguy8367 2 жыл бұрын

Do not for the love of God get underneath the car using scissor jack. Much safer with jackstands. Otherwise solid vid (2004 x3 83).

@mrOnlinePolice 2 жыл бұрын

Thank you. Yes car was on a scissor jack, but it also had all tires in place on top of ramps. If that scissor jack failed, car would still be on the ramps raised high enough not to squish me.

@Sroor2023 Жыл бұрын

Can’t you remove rust and lubricate the old shaft u joint ??and reuse it ?

@mrOnlinePolice Жыл бұрын

Probably not. By the time those rusty joints come out, they will be destroyed.

@Sroor2023 Жыл бұрын

@@mrOnlinePolice but those x3 are underrated I don’t why ? Can it be used as daily driver car is it good as e39 and e46 or it’s problematic , if I want I’ll take 2004-2005 without electric pump and this screen I drive But how about transfer case if it failed can you disable it and drive safely? Cause I’ve seen many people removed harness or fuse but abs and traction won’t work 😳😳😳 and those cars are rarely available in my country so you have to live without it until you got a working one in junkyard 😅

@mrOnlinePolice Жыл бұрын

@@Sroor2023 I had many problems with mine. When I bought it, It 66k miles, sold it with 89k miles. Replaced starter, drive shaft, battery, ignition coils. Ticking noise from the engine, AC would not hold freon. Transmission had delayed upshoft from 3rd to 4th. I did not like it. I sold it.

@Sroor2023 Жыл бұрын

@@mrOnlinePolice good job 👍🏼 thanks for saving me a headache 🤕

@adamproperdouble2094 Жыл бұрын

Newer F25 are even worse. Never again BMW for me it brakes down saying in garage . Horrible car.