Chevy Cruze - Leaking Water Outlet

Рет қаралды 90,738

22 күн бұрын

In this video I have a look at a customer's 2015 Chevy Cruze that was towed in because it over heated on the lady. A visual inspection showed that the water outlet housing had been leaking for a while and the car finally ran out of coolant. Let's get it fixed for this lady.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 694

@jimcharb4230 21 күн бұрын

Nobody will quit watching your videos Eric, a day without SMA is like a day without sunshine.

@aussiebloke609 21 күн бұрын

A day without sunshine is like...well, night. 😁 And I'll happily watch SMA vids all night. 👍

@kell8603 16 күн бұрын

...and a day without sunshine is like... night. :)

@tattoochef 21 күн бұрын

Even if the repair is "stupid" the commentary is always gold.

@blockbertus 21 күн бұрын

And still contains useful information a lot of times.

@sw7366 21 күн бұрын

It gives me the confidence to do it myself should the need arise.

@kimazbell460 21 күн бұрын

well said tattoo

@daveogarf 21 күн бұрын

@@kimazbell460 -- "Smiles, everyone! Smiles!"

@eddymahon1503 20 күн бұрын

Always😊

@James-dm6ey 21 күн бұрын

Showing the bs that happens on the daily is way better than sunshine and rainbows that other channels show. You're a real mechanic, not a parts changer. Showing how you muscle through the unexpected, and thought process for solutions is gold.

@josephludwig1126 21 күн бұрын

I love Eric O

@bags4 28 күн бұрын

Like all these other guys are saying, we’ll join you no matter what’s up. Between your sixth-sense for finding broken wire money shots, to your general spit-your-drink-out level of comedy, you are such a pleasure to watch, and we are so lucky that you keep on keeping on making videos for us to learn from. Thank you Eric.

@Todd66 21 күн бұрын

Very well said!

@wendwllhickey6426 21 күн бұрын

To hard to make out of aluminum plastic much cheaper lol😢

@smittywood-wp6he 21 күн бұрын

Why this comment says 6 day ago?

@helloitsme4139 21 күн бұрын

@@smittywood-wp6hechannel members get early access to south main auto videos, before they go live for everyone else

@DownloaderVideo 21 күн бұрын

@@smittywood-wp6heHe is a Time Traveler.

@wtfman5313 21 күн бұрын

Best Automotive channel on YT.

@mikebuffing727 21 күн бұрын

Along with Ivan at PHAD

@paavohynynen2654 21 күн бұрын

@@mikebuffing727 Three king Eric Ivan and Rainman

@LesReeves 20 күн бұрын

Yep said that many times.

@Don_ECHOguy 9 күн бұрын

Prolly the best Auto Shop on the block as well. lol

@JohnSmith-eq5el 21 күн бұрын

Eric, just wanted you to know how much I appreciate that you make these videos...

@Eric-xt9ub 21 күн бұрын

Ditto

@ggmusic6974 21 күн бұрын

Im Norwegian. I come here not only for the education, but for the presentation. "Well there's your problem lady", "its got the big 5-0 in it", "we got ourselves a Hondoo", "from Napa(r) not a sponsor" and so on and so on has become the Pinnacle of mechanical terms in my mind. There is no such thing as a "boring SMA"-video, the presentation is half the meal.

@tv43405 9 сағат бұрын

Meat nugget

@timcritz3194 21 күн бұрын

As a diyer , your videos are neither silly nor stupid. I learn something from each one plus the entertainment value is better than cable tv. I seriously doubt anyone will stop watching.

@donbryant2363 21 күн бұрын

I was today years old when I found out IRL stands for in real life… Eric is always spreading his wisdom in one way or another.

@jaycarrUK 21 күн бұрын

TIL...Today I learned, there's another one for you, if you didn't know beforehand. lol

@BigEightiesNewWave 21 күн бұрын

I had to look it up, weeks ago.

@paulcochran1721 20 күн бұрын

IYK,YK!

@johnpereira822 29 күн бұрын

Any repair video of yours is always entertaining no matter the content

@toddnelson2182 21 күн бұрын

Please put the Honda video out, we love em all and we don't see Hondas often. You're the best! Thanks for everything.

@LesReeves 20 күн бұрын

I agree anything unusual I would like to see as not everyone owns a Chevy,Ford Dodge & a lot of the other brands there is no videos out there.

@derekroopchan5162 20 күн бұрын

That's a super common issue on the 2.4 engines, would love to see how Eric approaches it.

@BLARNEYBLARNEY 16 күн бұрын

A video from you is like visiting an old friend … doesn’t matter if what you’re working on is “silly” … you still get to see your old friend. And that is something worthwhile.

@JohnAsang 21 күн бұрын

Keep posting all the content you can! As a 30 year veteran of the game, I always think someone will find your professional diagnostic and repair process very useful.

@adamtrombino106 21 күн бұрын

The fact that you've been doing vids for yrs while running a busy shop is pretty great, and it's a pleasure to watch and learn. Short or long, no vid is stupid if it helps someone. Thx Eric.

@kevinarmknecht1075 18 күн бұрын

I enjoy the mundane repairs as much as the hard ones. Thanks for bringing us along.

@JimNichols 20 күн бұрын

Lemme tell ya's somptin. Videos made in a real shop, by a real tech, using real language all that combined with great oration skills, a great script (whether ad lib or preconceived matters not) good videography and vid editing and you have the ingredients for an interesting channel. I understand the funk, I want a channel (at least a channel that is well received like 56k views in 16 hours well received) but I have nothing that interests me in my life so I am sure there is nothing interesting to share on YT. You are an enigma, great guy, great tech, nice shop and a good channel. Stop beating on yourself and enjoy the fact you are ok in many ways. Peace out Brother.

@loisrinehart6755 20 күн бұрын

You will never put out a stupid video. I love your commentary, wisdom and great sense of humor. Thank you, sir, and keep them coming food, bad or ugly. Thanks.

@douglash3129 Ай бұрын

Hi Eric, Well at least you have Mrs.O. bringing you a Cup of Hot Coco!!😁

@daryckstrain2278 21 күн бұрын

Don't over think the videos or the content. By now you should know we are here for you. The good, bad and the ugly are all part of the job. Just keep the videos coming as you can. Always remember the success of your business is the most important.

@frankmuschetto3385 21 күн бұрын

"Gotta get yourself a new o-ring. If you didn't, don't worry about it. I didn't and I'm not worrying about it. At least not now." Spit my coffee across the room. Post whatever videos you have. They're all good and informative.

@georgegonzalez2476 21 күн бұрын

That O-ring is on the overflow hose. Zero pressure. And even if it leaks, no big deal.

@kenholt8297 21 күн бұрын

Wow, that Eco Tech is once again car show ready thanks to Eric! 🎉🎉😂😂

@user-nk3tt6zt2l 21 күн бұрын

There are 100s of videos showing auto repairs, but yours are gooder than the others, tips and tricks, integrity, honesty and of course Mrs.O and her banter, we all see how she is your rock star. just remember Eric if you make it we will watch it. thanks much for all you all do.

@jimandnena4 21 күн бұрын

It has nothing to do with WHAT you are doing. It is HOW you do it that keeps me watching. And, everyone gets in a funk at some time. Personally, when I sense a funk coming, I pop my DVD of Apocalypse Now into the player and by the time Martin Sheen is hacking that water buffalo apart, I feel great! I am 10 years older than the state of Alaska, I have no time for funk. 😁

@DIYDaveOK 21 күн бұрын

I'll take your *worst* video over essentially anything on "regular" TV. Great as always, Eric. Thanks.

@Area51Resort 20 күн бұрын

Your videos have helped me tremendously. It's great to be able to look over your shoulder, watch you work and listen to your instruction and information. Thank you for making them!

@YamacrawJess 21 күн бұрын

Another comprehensive diagnosis, a competent analysis, a complete repair for a competitive cost. What a great service SMA provides. Avoca has a Jewel.

@joshuahodgins 18 күн бұрын

May i remind you... we watch to experience the same frustrations we encounter as the general public. Having stuff go wrong helps us identify and connect with SMA better

@everettparkin9795 21 күн бұрын

Always a good video with the additional informational,comedic commentary 😂

@Brand0n2 21 күн бұрын

I ain't never going to stop watching your videos!

@StopDropandLOL 15 күн бұрын

Been watching your videos 10 years Eric. There's a reason why you have nearly 900K subscribers. I knew way back when you had 5,000 subscribers that your channel was going to be huge.

@robbrobb2161 Ай бұрын

I always learn something from your videos as well as being entertained. Thanks

@ralphwatten2426 20 күн бұрын

I have a '12 Cruze that I do all the work on myself. Any video that's done on The South Main Auto Channel is worth while. Don't second guess yourself Mr. O. Your videos are greatly appreciated. Thanks

@OldManBadly 21 күн бұрын

You don't have to be in a funk. Sometimes the good stuff come sin the door and you get an amazing diag video, and some weeks it is just a parade of dead sensors and cracked water pipes. It is the nature of the business, and your approach to it all is good and positive. If nothing else, it is nice to know that you can still work on a newer car without needing a degree in rocket science.

@vicferrarisgarage 21 күн бұрын

We come for the humor and the chatter. I have always learned something from every episode. You worry to much. Just film & be you.

@jeffberg8015 21 күн бұрын

I always appreciate when you put out a new video, but of course if it ain't happening it ain't happening. Just remember we'll still be here when you do feel the desire to have someone to talk to while working. Thanks.

@zeke1eod 18 күн бұрын

Brotherman, your videos are far from stupid. Life/work/running a business gets in the way, no worries, we will be here. The absolute comedy of commentary is awesome by itself, and then we get tidbits of golden knowledge. Thanks for all you do. I hope you know we got ya. Stay safe, and God bless

@leighpike6572 Ай бұрын

Did a remarkably similar job , as in 3 hoses, 3 bolts, similar black plastic part on an Audi a2. Actually had to go back and check what car you were working on 😅

@SeilerRdAutoCare 21 күн бұрын

Many folks barely care about the actual repair lol! Now it’s about the awesome relatable commentary 😂 I often wonder if you ever saw that coming when you first started the channel.

@swallowinn4410 21 күн бұрын

Hello Eric : Think of your product somewhat like the "Field of Dreams" If you make a video "We Will Watch It". Your presentation is top notch. The satirical commentary second you none. For this viewer " It is a better day With SMA".😊

@trotva 21 күн бұрын

Everyone has said pretty much what I was thinking. But to be honest, I usually quit watching channels when the content changes so much that it's not the same. There is another two channels I watch for years and have quit. They have gone away completely new direction from the reason I watched them in the first place. Keep up the good work Mr O. Remember, take a break if you need. We will be here when you put out another video.

@allanandrowey5219 29 күн бұрын

I would watch anything you put out! It must be hard work remembering to talk to yourself(us) constantly, and have it flow as it does. Keep up the great work, its all great. Appreciate you !

@ericg4x4 21 күн бұрын

The Chinese aluminum ones are on Amazon !

@Richard_Gobbler 21 күн бұрын

Any good?

@SimiNelsonFamily 20 күн бұрын

As tempting as it is to go aluminum, I think I’ll stick with the OEM plastic before going to Chinese aluminum. As always, a very enjoyable video. Thank you.

@johnfalco9528 19 күн бұрын

@Richard_Gobbler. I just did this repair less than 2months ago using a aluminum part from Amazon. I have had zero problems with it since install. I did change out the aftermarket connector that goes to the coolant fill jug. So I can continue to use OE coolant hose and not have to look for aftermarket hose. Parts interchanged without issue, I would do this repair again and not think twice about it.

@Richard_Gobbler 19 күн бұрын

@@johnfalco9528 thank you

@RM..... 20 күн бұрын

NONE of your videos are crap. I've learned lots from watching them.Thank you for taking the time to record edit and post them and run your business

@sargefreedom1578 20 күн бұрын

Not everyday is a unicorn farting rainbows. I appreciate when you show the videos of the “ah crap” moments, real life stuff. Another video you made it look easy. Like my pop always said, “If it was easy, everybody would do it.” Thanks for taking us along for the ride

@BUTTABALLA999 19 күн бұрын

Whoa! I've actually done this job on my buddy's 14 Cruze. These things really are the gift that keeps on giving. Pressure test the cooling system, find a leak at the thermostat housing, repair, repeat pressure test. Leak at the water outlet. Fix, repeat. Water leak at the turbo return line - for Pete's sake! We also did the upper (driver's side) radiator hose, and the clamp on the radiator end was a humongous PITA to get to. We took out the battery w/tray and the PCM. This car can take a long drive off a short pier for all I care (as long as nobody gets hurt, of course).

@tschmi3856 17 күн бұрын

I just used one of your videos from almost 10 years ago to fix my Cobalt. Your work is appreciated!

@colerippeon3903 20 күн бұрын

While your in there, go ahead and do the turbo coolant lines, the thermostat and water pump, i would also probably change the headgasket. The turbo waste gate seat is probably cracked and i bet the timing cover and oil pan bolts have slowly backed out over time and is causing it to leak oil. Dont forget the automatic breather vent the valve cover develops to make a secondary air source. If you cant tell, these engines and i have a great history. Oh yea i forgot, change the front crank seal before it starts chirping like a bird is caught in a fan blade. Dont forget the "drill a hole in the rear axle beam and spray it full with wd40 so it stops cracking when turning tsb". I applaud you gm for this wonder piece of engineering you call a chevy cruze. You truly care about the consumer.

@007camera 21 күн бұрын

Even if you are not a DIY er, watching Eric's videos and hanging out with him would be very fun! Thank you Eric! 🌸

@abw121 21 күн бұрын

If Eric O. was painting a wall in the SMA shop, we would watch him talk about it! I have to go to work on Rusty Hyundai so SMA gives me the encouragement to tackle the job! Thanks SMA!

@carlosnavarro921 20 күн бұрын

I will Never quit watching your videos Mr.O it's SMA and Rainman Rays repairs for me both very entertaining the only two channels I watch

@brianthompson2045 21 күн бұрын

A very common vehicle up our way near Buffalo. Thanks for the video. Helping olders with these vehicles is a constant. Thanks again Eric!!!

@jamesrdorn Ай бұрын

I think most of us would watch you eat lunch, so don't worry about how stupid a video might be. 😂

@NOELTM 21 күн бұрын

Roll back to some earlier videos and you can see some fine lunches made by Mrs O.

@rossbowman202 20 күн бұрын

Mr. O you can always gives us a world famous SMA brake video 😁 I know I will watch it.

@ianrimmer1968 21 күн бұрын

Keep the videos coming Eric. KZfaq wouldn’t be the same without SMA!!

@cotyluckett 20 күн бұрын

I love how straight to the point you are. Rainman ray loves to blabber on and onnnnnnn. I think he talks more than he works.

@whatsthatnoise954 21 күн бұрын

I think pretty much any video you make will get watched, Eric. You don't necessarily need to make it super informative on every video. A "day in the life" video where you just show a little of each job you meander through in a typical day would still be entertaining because it's you. Maybe you need a little more feedback - do one of your live videos for an hour; it's been a while since the last one I think. Keep it up - we're out here for you.

@glennroy2747 21 күн бұрын

I like that "car show purposes".

@DarKMatter.1 21 күн бұрын

OMG Eric O! You didn’t push the little metal clip in all the way on blah blah blah blah… I just wanted to make sure you had someone bitching and whining about something today Eric, that way it didn’t seem outta the ordinary for ya😂😂. All your videos are gold sir. Doesn’t matter if you were spreading peanut butter on cheese. I’m sure a lot of people would watch. 👍🏻👍🏻👍🏻

@johnware2735 21 күн бұрын

Great way to start your day with an SMA video. Keep on wrenching.

@kensebring3683 21 күн бұрын

If we had one of you for each 500 people in the United States, it won't be enough sure like your channel. Ken from Western North Carolina

@wk7060 20 күн бұрын

Business is priority #1 in your case, over videos. Business is what makes your living.

@stu8575 28 күн бұрын

I've always wondered what those wings on the connector were called. Now I'll just call them "dongers"! 😉The car manufacturers must have all gotten together and decided to create plastic cooling system failure points. My Dodge had a molded plastic Tee, in the heater core circuit, but I cut it out and replaced it with a PEX brass Tee fitting so I don't have to worry about it anymore. I've always enjoyed watching, as I find your videos to be very informative!

@stanley526 20 күн бұрын

And....Another happy customer drives away in a much happier car.😊

@BobSakamoto 21 күн бұрын

No doubt making these vids can put you into a sort of rut, but there's one thing to remember. Maybe not millions, but there are a lot of people out there that are so grateful you walked them through a process they're probably going to have to do at some time. Take pleasure in that. You are a real asset to all of us.

@jdesaavedra0432 21 күн бұрын

Eric, just remember the really dumb jobs are the ones many of us are planning to do this weekend. Dumb things break. Inexperienced folks fix them. You give us the motivation to fix things instead of letting them go.

@ferdiecassel3697 21 күн бұрын

Plastic and heat. Planned obsolescence indeed. What's happened to GM lately? Don't sweat it Eric. We always learn something from your videos. Thanks.

@scotthill1278 20 күн бұрын

My cable TV has 300 channels, I would still rather watch an SMA video.

@LTCustomsLLC 20 күн бұрын

We love your videos because they are real Eric! 💩happens to everyone so it's somewhat endearing to see how others navigate the same crap river we all seem to be floating in from time to time. Keep up the awesome work! We love it!

@tomtke7351 21 күн бұрын

you spoke of 'business interruptions.' .. While unavoidable these are where Mrs O, the OFFICE MANAGER, is worth her weight in GOLD. Yeah, there's times when you two must collaborate but generally she's the 'one' to clear the hurdles leaving you free to focus on mechanic's puzzles.

@HyproTube 19 күн бұрын

I'll watch nearly every "stupid" video you want to put out, as I always enjoy and learn from them.

@chrissmithz314 Ай бұрын

Appreciate you pumpin out vids even with the funk

@Bediasman 21 күн бұрын

I agree with most, education is great, but the commentary is the best. Thank you

@2DogsVlogs 20 күн бұрын

Rare to see a Cruze on the road now. SMA keeping this one alive for another year or two. Looked at getting one but went for a Sebring. Another car you never see anymore. All long gone to the scrap yard.

@JHKCF 20 күн бұрын

Your videos are like comfort food. Gotta have it.

@robertnicholson771 19 күн бұрын

People will be searching for and watching these videos for many years. No matter how silly you think it is, I learn something from every one. Thanks!

@jamescrutchfield9832 20 күн бұрын

No video has been stupid, keep up the good work.

@jgage2344 21 күн бұрын

Hey Eric ,I am a AAA battery service driver and I not only use some of your tips to find problems and keep people on the road but mention your channel to members with issues they can’t figure out …keep the videos coming please ! And I’m in So Cal no less ! No rust ,well less rust !

@donakahorse 21 күн бұрын

honestly I watch you for entertainment more than instruction. Not that I don't learn anything, because I do, but I enjoy the commentary.

@itsdavex2 20 күн бұрын

I haven't watched the video yet, only saw the thumbnail. My sarcastic self said well there's something different, ha. Water outlets, turbo chargers, pcv in the valve cover, oh and the check valve thingy in the intake manifold. Thanks for posting.

@petermccoll469 20 күн бұрын

Pretty much any repair is fun to watch. I always check SMA first.

@pjc5437 21 күн бұрын

I’d watch you crochet a sweater, it’s fantastic that you keep rolling out content.

@WouterB76 20 күн бұрын

You could upload a video of you pumping up a tire and i would still watch it. Content on a pure technical scale is one thing, the way you present it is something hard to explain, ment in the most positive way possible.

@johnds6621 20 күн бұрын

Your vidoes are always fun and easy to watch. I learn so much from you not only about how to fix cars but which cars aren't worth buying. Keep up the good work. More Luna time would make my cats happy.

@mikeboring1293 21 күн бұрын

Another great morning from SMA

@richardsimons3382 20 күн бұрын

We all could use a good sma brake job video they never get old

@thagerdorn2009 21 күн бұрын

I absolutely love my Cruze. Its a 13 LTZ RS 1.4 Turbski with 212k i got in November and put 12k on it since then. I've replaced all the common things with oem GM stuff so i didnt have to worry about it. Ive bought and fixed and sold over 200 cars and it's one of my favorites. We just bought my wife a one owner 12 Cruze Eco and she loves hers.

@richmontonario6949 21 күн бұрын

I watch everyone of your videos, even the after hours channel, I enjoy your content, even if it did get super dumb, I'd still watch it.

@GunfighterWyo 21 күн бұрын

Everyone would lose if you stop your videos. I learn so much. Keep up the great work.

@CheezburgerBrown Ай бұрын

I have a sonic with the 1.8, different motor, same issue. Lots of people replace the thermostat housing on the 1.8 and 1.4 with the aftermarket one that is made of metal. Jury is still out as to wether the potmetal is any better than the plastic in the long term. Once you've replaced all the factory cooling system components on the 1.8, they're ok beaters. Once you send the 1.4s to the junkyard, they get melted down into new thermostat housings to keep the 1.8s on the road.

@tomg721 21 күн бұрын

Will be waiting on the turbo replacement vidieo for the Cruze Eric. Thanks for posting.

@NWA320DRVR 21 күн бұрын

Wearing my SMA long sleeve shirt while watching SMA and eating lunch. Fantastic!

@evilzarmy1 20 күн бұрын

I watch for the commentary, I don't remember watching a single video of one of the cars I own, I watch for the winning personality. I've been fixing my own cars my whole adult life, because most mechanics are slightly less than honest.

@Mr2004MCSS 20 күн бұрын

I personally enjoy your videos and always seem to learn something. You have also helped me spend a lot of money over the years on tools and related automotive equipment. LOL. Keep up the good work.

@kicknsystm 21 күн бұрын

I love the big check engine light on the wall of the shop! So cool!

@autorepair4800 20 күн бұрын

I look forward to your videos every day. Keep up the great work

@jeffedgar562 20 күн бұрын

Car show comments are gold

@averywellsand888 Ай бұрын

Just did one of these... pain in the... then the thermostat housing warped and that hose that goes to the rez is junk the dorman part is awesome and removes a point of failure ie that stupid clip

@greatzot 21 күн бұрын

I am hoping this repair is what my neice is needing on her cruze. Thanks Eric O. for showing this.

@ejwxb2561 13 күн бұрын

Echoing the below comments - always enjoy the SMA videos!

@AnalogueKid2112 20 күн бұрын

This video was incredibly useful for me. My friends Cruze also has a case of disappearing coolant and I wasn’t sure where it was going. Now I have a place to start looking