CLUTCH REPLACEMENT Land Rover Td5 Defender

CLUTCH REPLACEMENT Land Rover Td5 Defender - Step By Step How To

Рет қаралды 14,865

Күн бұрын

A step by step how to video on how to replace a Land Rover Defender Td5 clutch (Works almost the same for the Discovery Td5)
Ask me anything in the comments down below!
SUBSCRIBE
Trick to get the Spigot bearing out:
• Video
(not my video)
Clutch kit used:
lofclutches.com/shop/clutches...

Пікірлер: 28

@rustandoil 3 ай бұрын

At 150k miles it seems that my TD5 clutch needs replacement... Having watched your video I'm happy to pay someone to do it! 😊 Fantastic video explanation as always 👍🏻

@a4065aa Жыл бұрын

Thank you. That was amazing to watch.

@Td5Adventures 11 ай бұрын

Awesome, thanks for watching!

@rockystonewolf 10 ай бұрын

Flott! veldig fin og instruktiv film. Du får ros for både mekanikerjobben og film-redigeringa.

@Td5Adventures 10 ай бұрын

Tusen takk!!!😁

@rosscoupland5833 Жыл бұрын

Great video. Looks like a lot of work!

@Td5Adventures Жыл бұрын

Thank you! Yes it was about 25 hours of work. But the result was great and the customer happy!

@scubapauli Жыл бұрын

The handbrake, just open the 4 bolds and swing the hole drum to the side, safes many work 😇 good video

@Td5Adventures Жыл бұрын

Thanks!!

@joshuacosta-sa8398 Жыл бұрын

Currently doing my clutch on my td5 discovery 2 with the almost the exact same kit as you and have and found this video really helpful thank you.

@Td5Adventures Жыл бұрын

Happy to help! Good luck 😁

@julienchahine7601 9 ай бұрын

Thank you for the presentation and Greetings from Paris ! I have a defender TD5 year 2003. If I up-shift quickly with high RPM from 1st to 2d, or 2d to 3d, I feel a crunch/grind in my hand (not so loud to hear it in the vehicle, I can just feel it with my hand). If I leave the RPM/rev normal, and leave a 1 second pause on Neutral between these gears, all is fine. No crunch when downshifting. The gearbox runs with new MTF94 oil. Is this a normal behavior for a R380 ? Are we supposed to UP shift slowly with these gearboxes, losing momentum ? Losing momentum is not an issue on flat road, but annoying climbing a slope. Many thanks for your help and feedback ! Julien

@internationalgypsi Жыл бұрын

Love your videos! super helpful for kicking off my own td5 works. Also, which flywheel (single mass), clutch and release bearing kit did you use? would you mind to share the webshop link? thanks

@Td5Adventures Жыл бұрын

Thanks for watching!😁 This kit is called the LOF Clutches ROAD spec and includes all the parts necessary, i can't share a link in the comments unfortunately but I'll put it in the description for you.

@jeroensmurf 7 ай бұрын

Thanks for the video, going to do this soon. How's your experience with the SMF? Still in doubt going for that or the original DMF. No extra vibrations? I guess you also changed the spigot bush?

@kevinmartin9432 Жыл бұрын

Excellent video, when I did my clutch, I think I disconnected the handbrake cable from the lever, as I don't recall removing the shoes?

@Td5Adventures Жыл бұрын

Oh wow that's a really good tip! Next time I'll definitely keep the shoes on👌🏼👌🏼 thanks!

@mcremaster 9 ай бұрын

Great video! Which headlights did you install and what is the dimension of your tires and rims? Thank you so much.

@Td5Adventures 9 ай бұрын

Thanks for watching! This was a customer car so I do not know the brand of the lights. The tyres are 265/75R16 in size👌🏼

@radiator0 Жыл бұрын

Great upload, It's strange that you carn't fit the upgraded slave cylinder with a new clutch. I waited 6 months before i fitted mine and what a difference it makes, i couldn't manage to fit the upgraded spring though. no matter how hard i tried..

@Td5Adventures Жыл бұрын

I agree, it is very weird, as if the new clutch is supposed to be thicker or something. Anyways, if I would've known it would've saved me a lot of time 😅 Hope you'll get it to work some day...