Dodge Dakota 4.7 into a Dodge Ram 1500

Dodge Dakota 4.7 into a Dodge Ram 1500 - 4.7 engine swap part 2

Рет қаралды 16,092

6 жыл бұрын

Part 2 of swapping a 4.7 from a Dodge Dakota into a dodge Ram 1500.
Full List of parts that must be swapped:
-fuel injectors
-motor mounts
-block plate
-oil pan
-pickup tube
-oil pan gasket/windage tray
-intake plenum
-dipstick tube
-dipstick
-radiator fan and clutch
-passenger exhaust manifold
-dowel pins
-PCV tubes
Full list of parts swapped in this video:
-fuel injectors
-motor mounts
-block plate
-oil pan
-pickup tube
-oil pan gasket/windage tray
-intake plenum
-dipstick tube
-dipstick
-radiator fan and clutch
-passenger exhaust manifold
-Driver exhaust manifold
-dowel pins
-PCV tubes
-Valve covers
-Fuel rail
-Ignition coils
-Throttle body
-PCV valve

Пікірлер: 21

@arizonaguy7574 3 жыл бұрын

This is how a swap video should be done... Thank you

@hasnoskilldover8474 5 жыл бұрын

Great job on your research and knowledge of dodge engine differences.

@MartinPerez-sl4mc 3 жыл бұрын

EXCELENTE! INSPIRA CONFIANZA, PARA MIS PROYECTOS

@patriciamcclelland1855 Жыл бұрын

Could you show me where the wires and plugs go on the passenger side to the motor a computer

@SmudgyContent 5 жыл бұрын

Yeah I’m in the cold salt belt and we rust and the heat toasts you’re down there 👌👍 no perfect medium to anything in this world hey 🤣😂

@jackboisse6861 2 жыл бұрын

What oil pan did you use as a replacement? One of my front wheel components is rubbing on the pan.

@robertlilley9030 Жыл бұрын

You can take pix of the engine to make it easier for the novice. Take multiple pix.

@petergaribaldi7582 2 жыл бұрын

Congratulations for your videos I have cuestion I changed motor with transmission in 2011 ford fiesta come from 2014 ford fiesta but didn't want start now if you know something please let me know thanks for your help and time

@jacksmiththeboss 5 жыл бұрын

good job im swapping an 06 4.7 into an 04 truck right now should be done in a few days

@elianbarajas2869 5 жыл бұрын

Citizens First how did it go?

@kidd6055 4 жыл бұрын

XXXDeathByFartsXXX hey man how’s you know where all the connectors went?

@georgecampos7119 4 жыл бұрын

Do you have a video on how to pull the engine? What are the steps

@pfun41 4 жыл бұрын

I did it on a whim at 11 pm so unfortunately no.

@ralphshaw9758 4 жыл бұрын

Typical 4.7 degradation when you start it and get that brief knock. That means it won't be long before it spins a bearing . Heed the knock.

@brycebaker3903 4 жыл бұрын

What year are these?

@pfun41 4 жыл бұрын

Vehicle is 04 I believe the engine is also around 04.

@Dragon90815a 2 жыл бұрын

Couldn't you have just set it on motor mounts then move ac compressor.

@pfun41 2 жыл бұрын

It wont go back far enough with the compressor there.

@howtosellyourcustomprinted7483 6 жыл бұрын

You sure know a lot

@FullEffect713 5 жыл бұрын

Stewart Moore hey where does the ground from the batter go to, I noticed in your video it goes straight down

@davidmaddox2340 3 жыл бұрын

@@FullEffect713 ⁰00p011¹