How to clean silicone oil off your acrylic pour paintings easy method 😮 + adding a resin top coat

Рет қаралды 7,846

Күн бұрын

Thanks for watching, be sure to subscribe and go check out a few more of my other videos. Those are great free ways to support my channel.
When working with #resin always work in a well ventilated area. Wear a respirator with organic vapor filters and wear nitrile gloves.
I started a page for my Art on Facebook. Please go check it out and leave me a like on my Facebook Art Page @Art by Tish here's the link / art-by-tish-1134900503...
Check out how I made the 12x24 black, white and gold swipe acrylic pour painting shown in today's video. Here's the link to my Creation demo.
• Acrylic pour swipe tec...
The resin I used today was @TotalBoat TableTop Epoxy Here's the link to their resin on their website. It's easy to use 1 to 1 ratio, 20 minute working time 30 minute gel time. I really likes working with it. www.totalboat.com/product/tabl...
It's also available on Amazon, here's the link. At no additional cost to you, as an Amazon associate I earn from qualifying purchases. amzn.to/2XbBUGw
I am now using KSRESIN for top coats on all of my coasters. I used their liquid stone countertop resin. I also have a discount code for any of their products as well. Discount code Naptime will save you 5% on any purchase. Here's the link to their liquid stone resin. www.ksresin.com/products/liqu...
As an affiliate of the epoxy resin store and KSRESIN At no additional cost to you. I earn a small commission when you use my coupon code. It's a great way to help support my channel.
Links to items I use in my videos purchased from amazon. If you have any amazon shopping to do at all. Please use my referral link to go to their website & shop just like you normally would. If you use my link to go to Amazon's site any purchase you make will earn me a small commission and in turn will help out my channel. You can also bookmark my link and use it for future Amazon shopping. I am so grateful for your support. As an amazon associate I earn from qualifying purchases.
3M half face respirator I use. You must purchase 3M organic vapor filter cartridges separately. amzn.to/3nYaZJR 3M
organic vapor filters/cartridges I use on my respirator amzn.to/3o0D0R3
Mod podge gloss
amzn.to/3qiln0d
Foam brushes
amzn.to/2MVDEC2
Mehron gold pigment powder amzn.to/3hGolZ2
Heat gun I use for resin art, it comes with attachments. amzn.to/36uh5tA
Table top ring light I use for lighting amzn.to/2NLYEJL
Cell phone tripod I use for filming amzn.to/2UoIS8O
Let me know if you have any questions down in the comments, I would love to hear from you.
Safety Disclaimer Before you create ALWAYS read all of the instructions and safety labels on all of the products you are going to use. I am no expert I am just sharing the way I like to create art and any tips/tricks I have learned along the way. ALWAYS wear proper safety gear when working with resin and paint. I ALWAYS work in a well ventilated area. Also always wear nitrile gloves and a full face respirator when I work with resin. Remember to have fun and be safe when you are creating. Always keep a fire extinguisher nearby your Creation station. Thank you :)
As an affiliate of the epoxy resin store, ksresin, arteza and Amazon I earn a small commission at no additional cost to you. I greatly appreciate your support and use of my affiliate links and codes. All commissions earned help me purchase more art supplies so I can keep making videos for my KZfaq channel.

Пікірлер: 176

@keithclark6299 Жыл бұрын

I know I have come to this video rather late but I would like to add something to the mix. I accidently got a great canvas by getting a resin coat completely wrong. All is not lost if some silicone oil remains as it produces a "wet look" canvas and the effect is stunning. I applied the resin and came back to it next day in the belief that it would be ruined, but to my amazement actually the puddling of the resin gave a unique wet look as if you were viewing through a window with rain on the glass.

@naptimecreations Жыл бұрын

That sounds cool. I'm glad it worked out in the end for you and the painting was saved 😊

@lynnem.barry-mcmullen5278 2 жыл бұрын

Thank you for posting! This is a big help! I didn't realize you could use glass cleaner and was told to use Dawn Dish Soap which takes forever to dry! This is a simple, very effective method to seal silicone pours. Probably the best method I've seen. Easy to follow instructions and cost efficient! Excellent! Thanks again!! BTW- I LOVE the painting!! It came out just beautiful!

@naptimecreations 2 жыл бұрын

No problem, thanks so much for watching. I'm so glad this was helpful. I used to use dish soap and cornstarch to clean the oil off and it took forever. It made me stop using silicone oil for a while. Once I discovered this method I started using the silicone oil again and now I love using it again. 🤗💙

@mary-loubush4230 3 жыл бұрын

great tip about the modge podge thanks

@naptimecreations 3 жыл бұрын

Thank you 🤗🤗🤗 it works so well and is so much easier than using cornstarch or baby powder to soak the oil off ❤

@HeathersTreasures 3 жыл бұрын

I watched this last night on my TV. Loved how you cleaned your canvas and didn't remove any paint. I found that amazing!

@naptimecreations 3 жыл бұрын

Thanks so much Heather 🤗🤗🤗 I have a ton more to clean off and resin 😅 thanks for watching 💙

@naptimecreations 3 жыл бұрын

Thanks for watching ❤ if you want to see how I made the painting shown in today's video check it out with this link 😊 kzfaq.info/get/bejne/bs-EaL2bsa64dXU.html

@MommaBearsCorner 2 жыл бұрын

note, if tape seems stuck, if you just heat over it barely, it will smoothly come off. turned out great. thanks for sharing

@naptimecreations 2 жыл бұрын

Thanks for watching, that's a great tip. Thank you 🤗

3 жыл бұрын

WOW very beautiful colors nice

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 🤗🤗🤗

@wilhat 3 жыл бұрын

Looks fantastic.

@naptimecreations 3 жыл бұрын

Thank you 🤗🤗🤗

@wendywasserman2173 3 жыл бұрын

Love this piece. Gorgeous

@naptimecreations 3 жыл бұрын

Thank you so much 🤗❤

@DorisAtDFDesigns 3 жыл бұрын

I'll need to try this way now. Thanks for sharing Tish!!!

@naptimecreations 3 жыл бұрын

Thanks for watching Doris, it works so well. Let me know how it goes 😊

@peggymcd4939 2 жыл бұрын

Thank’s for the info and vid..helps so much ‼️

@naptimecreations 2 жыл бұрын

Thanks so much, so glad this was helpful. Thanks for watching 🤗

@teaandart 3 жыл бұрын

I really need to try these awsome tips Thankyou so much ❤

@naptimecreations 3 жыл бұрын

Thanks for watching, I hope you have a great weekend 🤗❤🤗

@HopeDesigns 3 жыл бұрын

Great tips and beautiful painting Tish!

@naptimecreations 3 жыл бұрын

Thank you 🤗🤗🤗 I hope to make some more like this soon 😊 thanks for watching 🤗

@laurausher4966 3 жыл бұрын

great tutorial Tish

@naptimecreations 3 жыл бұрын

Thanks girlfriend, I hope you are feeling better 💙💙💙

@LonghornWorkshop 3 жыл бұрын

Nice tutorial, and total boat is good stuff

@naptimecreations 3 жыл бұрын

Thank you so much my friend. I'm really liking the total boat so far 😊 thanks for watching 😊

@GinaBeana_Tootsie 3 жыл бұрын

Tish very good video so many people do different ways it’s always great to learn someone else’s tips thanks for sharing 💜😊✌🏼

@naptimecreations 3 жыл бұрын

Thanks Gina ❤❤❤ thanks for watching 🤗

@marlenanelson4031 3 жыл бұрын

Thank you for the tips!

@naptimecreations 3 жыл бұрын

Thanks for watching 🤗🤗🤗

@neerumotiani 3 жыл бұрын

Awesome 😍😍😍

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 🤗🤗🤗

@ArtistRebeccaLS 3 жыл бұрын

Great tip and advice Super sparkling ✨🤩

@naptimecreations 3 жыл бұрын

Thank you so much ❤🤗❤🤗🤗🤗

@CatherinethePaint 3 жыл бұрын

Great video! I feel like a main component to arting is gathering information. You always give me another little piece of information that I will incorporate dinnertime in the future! Thanks for that!!! 💖🥰💖 This painting is beautiful! I remember the video! 😍

@naptimecreations 3 жыл бұрын

Thank you so much, I feel like that too. I feel like it's always good to learn as many tips and tricks as I can along the way 🤗 thanks for watching ❤

@JBpourart 3 жыл бұрын

Thank you for this video!

@naptimecreations 3 жыл бұрын

Thanks for watching, I hope you give it a try. It works like a charm 😁

@TotalBoat 3 жыл бұрын

Awesome tips! Your artwork is stunning!

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 🤗😊

@mountainviewturning5319 3 жыл бұрын

Looks great 👍

@naptimecreations 3 жыл бұрын

Thank you 😊😊😊😊😊💙

@ladycinnamon86 3 жыл бұрын

This is so beautiful

@naptimecreations 3 жыл бұрын

Thank you ❤❤❤🤗🤗

@leeannjanson1936 3 жыл бұрын

Fantastic, thank you for sharing. Great work too❤️😃 greetings from 🇬🇧

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 🤗🤗🤗

@wendydevereaux 3 жыл бұрын

All three are so pretty! The cells are fantastic 💙💙 I’m hard pressed picking a favourite but I would say the first and last are my favourites equally 😊💙💙

@naptimecreations 3 жыл бұрын

Thank you 🤗💙

@Rizki_Andru_Pahlewi 3 жыл бұрын

thanks for this information

@naptimecreations 3 жыл бұрын

Thanks for watching 😊😊😊😊😊

@elizabethschydlower5367 3 жыл бұрын

Wonderful! Thank you!

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 🤗🤗🤗

@ladycinnamon86 3 жыл бұрын

This was awesome..never knew about the ModPodge..loving the Info and tips...Tfs

@naptimecreations 3 жыл бұрын

Thanks for watching, mod podge is good for so many things ❤❤❤❤

@kimramsdale5088 3 жыл бұрын

Thank you so much for this information 🙏🏼🇦🇺

@naptimecreations 3 жыл бұрын

Thank you so much for watching Kim. This method is so much easier than using powder or cornstarch to soak up the oil 😊

@ItsLaurenE 2 жыл бұрын

I'm so glad to stumble on the video linked to this one. I've been using dawn dish soap and a nail scrubber and basically going to town as dawn removes oil so well. Only problem w that method is i end up with a drenched canvas that then needs to dry thoroughly. I was holding on to my keeper paintings, on a sunny day washing by the batch and letting them air dry, I'm not a fan of relying on good weather especially in Chicago 🤣 Recently saw someone mention windex to remove silicone before varnishing but didn't go into too much detail about how many times is best. Thank you for this!

@naptimecreations 2 жыл бұрын

Most definitely, everything is weather permitting here too 😆 after I filmed this video I actually tried to seal my paintings made with silicone oil only using mod podge and it worked nicely too. I skipped the windex and just went in with the mod podge. The mod podge alone worked great. Also rustoleum gloss clear spray paint works nice too. 3 coats letting each coat dry, will do the trick too. No windex necessary for the spray paint either 😁

@ItsLaurenE 2 жыл бұрын

@@naptimecreations thank you for the extra tips! 💕

@naptimecreations 2 жыл бұрын

@@ItsLaurenE no problem 🤗🤗🤗

@ArtByJulieE 3 жыл бұрын

Thanks for doing this video Tish! I get so many questions when I talk about a barrier coat. It came out beautifully!😍💕

@naptimecreations 3 жыл бұрын

Awe thanks & thanks for watching Julie ❤I've been wanting to make this video for months, just haven't had time. I'm glad I finally was able to upload it. In case it helps anyone out there.

@ArtByJulieE 3 жыл бұрын

@@naptimecreations I think it will help a lot of people. I know I'll recommend it whenever I get anymore questions!💕

@naptimecreations 3 жыл бұрын

@@ArtByJulieE awesome, thank you 😍😍🤗🤗 I appreciate you doing that 🥰

@melissaphillis7247 3 жыл бұрын

Fantastic video thanks Tish xxx its so beautiful

@naptimecreations 3 жыл бұрын

Thank you 🤗🤗🤗 I was so happy to finally finish this one. I have a few more to finish 😅😅😅😅 thanks for watching 💙

@melissaphillis7247 3 жыл бұрын

@@naptimecreations I must admit, that's the hardest part...it's fun making them, but the last steps can be a bit annoying...lol, it's not that I'm a procrastinater though....ha ha ha (well, alright, I am)

@naptimecreations 3 жыл бұрын

@@melissaphillis7247 🤣🤣🤣 I'm right there with you girlfriend we can be the procrasti-painters 😅❤

@melissaphillis7247 3 жыл бұрын

@@naptimecreations love it!

@naptimecreations 3 жыл бұрын

@@melissaphillis7247 🥰🥰🥰🥰🥰💋💋

@SheriPhaffArtPaintBrushed 3 жыл бұрын

Beautiful painting Tish! I like seeing how other people clean silicone from their canvas. I wash mine in the sink with dish soap and running water! LOL Thanks for sharing.

@naptimecreations 3 жыл бұрын

Thanks so much and thanks for watching 😊 that's a good idea. I will give that a try sometime. Never thought of that ❤

@soleilmanart 3 жыл бұрын

Thanks for sharing 😊

@naptimecreations 3 жыл бұрын

Thanks for watching 😊😊😊

@soleilmanart 3 жыл бұрын

@@naptimecreations you are welcome 😊

@naptimecreations 3 жыл бұрын

@@soleilmanart 🤗🤗🤗🤗🤗🤗🤗

@LiveSleepResin 3 жыл бұрын

This_piece_is_stunning. I'm so gpimg to have to have a go.

@naptimecreations 3 жыл бұрын

Thank you so much, definitely try it out 💙😁

@nancycraig4672 3 жыл бұрын

This is gorgeous! Thank you for the tip on cleaning it before we seal it. I had no idea, I was about to start on a tray and use a silicone-based I ordered so that I could create cells . My project would’ve seriously gone wrong if I got Fish eyes 👀 LOL 😂 thanks so much !!!

@naptimecreations 3 жыл бұрын

No problem, thanks for watching ❤ really load up the mod podge to seal that oil in after you clean it off and you will be good to go ❤

@paulalindsay3697 3 жыл бұрын

I LOVE this painting!! And the excellent tips as well! I've been making coasters and resining them, but ALWAYS have trouble with fish eyes on any that I use silicon oil in. I've been using corn starch, then 90% rubbing alcohol and then a little Dawn dishsoap to try to clean them off before resining, but I can never fully get the oil off and always have to do multiple layers of resin (cleaning the coasters with Dawn dishsoap and rubbing alcohol between each layer) I've never seen the mod podge sealing technique! I'm going to try adding in that step (and the windex too!) next time! Thank you SO much!

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching. I hope you give it a try. I used to use the cornstarch method and kept having the fish eye problem. Some of my coasters would end up with 4 coats of resin because of fish eyes. So then I tried using the mod podge and it worked like a charm. Just make sure to do at least 3 nice thick coats of the mod podge 😊 let me know how it goes 😊

@JSCreationsArtSanity 3 жыл бұрын

I never thought about using Windex... I usually just use alcohol. And if the silicone oil is really bad, I use baby powder to soak it up and then alcohol to clean. I'll have to give the Windex a try. Thanks for sharing. And congrats on the 10K subs!

@naptimecreations 3 жыл бұрын

Thank you so much, I'm having a 10k giveaway soon 🤗 stay tuned for more info on that. Definitely try the windex, I used to use baby powder and cornstarch. This method is way less messy 😅❤ thanks for watching ❤

@sherrislife2046 3 жыл бұрын

I did notice that was a painting you did with your pre-mix paint which always dries with a gloss. Normally I would not spray my regular acrylic painting with Windex to get off the silicone but for the pre-mix it’s a great idea. Hopefully some will not try that on their regular acrylic paintings. I’m not sure exactly what it would do but it might leave marks from the Windex. The Mod podge is a great idea. I love that painting you did also. That’s one of my favorites.❤️👍

@naptimecreations 3 жыл бұрын

Good call 💜🤗 I didn't think of that. I did try this silicone oil cleaning method a while back with my own mixed paints and it worked well. They were pours done with silicone oil on tiles. Thanks for watching 🤗

@artbyjuliewestwood 3 жыл бұрын

Thanks for the ideas I’m going to try your suggestions- if you do another top coat of resin do you sand the first coat first before putting the second coat on ?

@naptimecreations 3 жыл бұрын

Thanks so much for watching, I hope you give it a try. Let me know how it goes 🤗 Before my next top coat. I will sand it lightly by hand with a 320 grit sandpaper. Then I'll clean it off well with some isopropyl alcohol and do my clear top coat. I'm also going to add a few coats of mod podge to those missing spots just to make sure it wasn't the silicone oil that caused them. I'll make sure to avoid these areas while sanding.

@amsterdamtimelapse 3 ай бұрын

Great video, thanks. I'm new to this and don't really understand what the function of the modge podge is.

@naptimecreations 3 ай бұрын

Thanks for watching, the mod podge seals the silicone oil in. If you use silicone oil and you don't clean it off completely (it's difficult to clean off) you need to seal it before you resin your painting or you will end up with huge pits of missing resin. The oil repels the resin.

@amsterdamtimelapse 3 ай бұрын

Thanks so much for your answer! It’s clear now :-).

@zenguitar65 2 жыл бұрын

Nice work. How long did the paint cure before attacking with the glass cleaner and paper towels?

@naptimecreations 2 жыл бұрын

Thanks for watching, It was 30 days before I did the glass cleaner process. I also discovered clear gloss spray paint works just as good as the mod podge for sealing. I just haven't had a chance to make a tutorial. I used no glass cleaner just took paper towels and dabbed them On the piece to absorb any oil. Then I sprayed it with 3 coats of rustoleum gloss clear spray paint. Letting each coat dry before I did the next one. It works well 😁

@agnetabjelke4106 3 жыл бұрын

Thank you for sharing 🌟 Very well explained always a bit nervous on how to vanish 😅 Would love to see the video on how you made the painting 🖼 couldn’t find the link ? It is a swipe? Love the colours 👍

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 😊❤ here's the link to the Creation demo of the painting in this video, it's a 12x24 swipe 😊 kzfaq.info/get/bejne/bs-EaL2bsa64dXU.html

@naptimecreations 3 жыл бұрын

For the varnish, I actually like to use spray. I use rustolem gloss 2x clear coat spray. You can get it from Walmart or home depot, lowes, etc. It works really well and I spray it on my pieces outside on a nice day, use 2-3 coats. Letting each coat dry before I add the next coat. I Also wear my respirator when I use spray it on. It can get stinky.

@christyhayes5797 3 жыл бұрын

I love your video. I used your technique on tile coasters and they turned out perfect. Do you suggest using Mod podge on tile coasters as well?

@naptimecreations 3 жыл бұрын

Thanks so much for watching 🤗💙 yes this 100% works like a charm on tile coasters too. Just make sure to get a good coat on the edges too. 3 coats of mod podge letting them dry at least 1 hour in between coats 💙

@christyhayes5797 3 жыл бұрын

@@naptimecreations Thank you so very much! Love your work!

@naptimecreations 3 жыл бұрын

@@christyhayes5797 thank you 🤗🤗🤗 I appreciate you 💙

@namiekarigney2537 3 жыл бұрын

Beautiful painting. Do you remember how long you let you paint cure before cleaning it off? I don’t want to do mine to soon and risk my paint coming off. Thanks

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 🤗 I let it cure 30 days before I cleaned it and did this process 😁

@annadoyle2947 3 жыл бұрын

😍THANK YOU SO MUCH FOR POSTING THIS!!! 👏🏼👏🏼👏🏼 How long do you wait when you use silicone or oils before you begin the process!????🎨💜💜

@naptimecreations 3 жыл бұрын

Thanks so much for watching 🤗❤ I let the paintings made with silicone oil dry a 7-10 days (depends on the size 12x24, I let dry 10 days) before I start this process. 😁

@denevebunde848 3 жыл бұрын

Your work is beautiful! You are very informative and move along quickly! My question to you is how do you clean ceramic tile that has silicone? When I have done it with glass cleaner or other products it takes off the paint. How can I prevent that ? Thanks for sharing your expertise!

@naptimecreations 3 жыл бұрын

Thank you so much, that means so much to me. Thanks for watching. Sorry to hear that is happening when you use cleaner to clean the oil off. What I would do is skip the cleaner. Take a plain paper towel and press it on the surface of your dry painting. Try to get the paper towel to absorb as much silicone oil as possible. Then apply 3 or 4 coats of mod podge. Letting each layer dry all the way before you add another layer. Don't forget to do the edges and sides of your tile. After all your coats of mod podge are dry you can do your resin top coat or varnish.

@denevebunde848 3 жыл бұрын

Thanks for the great information! You are so generous sharing your expertise!

@naptimecreations 3 жыл бұрын

Happy to help anytime if I know the answer 😁🤗

@irislee3195 3 жыл бұрын

I love this one! 🤩 Thank you so much for sharing this with us. I was wondering if Elmer’s glue can replace mod podge? Have you ever tried Elmer’s glue before?

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching 🤗 that's a good question. I've never tried glue before but I think it would work because it's very similar to mod podge and it dries clear. I'll try it in an upcoming video asap 🤗

@irislee3195 3 жыл бұрын

@@naptimecreations Look forward to seeing your upcoming video☺️

@naptimecreations 3 жыл бұрын

@@irislee3195 🤗🤗🤗🤗🤗

@sandywestberry185 3 жыл бұрын

Hi Tish: Just wondering what does the Mod Podge do for the painting? This painting looks so amazing. Thank you

@naptimecreations 3 жыл бұрын

Thank you so much and thanks for watching. The mod podge acts like a sealant incase any of the silicone oil didn't get cleaned off. The mod podge layers seal it in so the resin top coat goes on nicely. If there's silicone residue left on the canvas it will cause fish eyes, craters, pits on your resin top coat or varnish. The silicone oil repels it.

@sandywestberry185 3 жыл бұрын

@@naptimecreations Thank you so much. I will have to try that on my silicone added paintings.

@naptimecreations 3 жыл бұрын

@@sandywestberry185 Definitely try it, it works like a charm. Let me know how it goes 🤗

@theinkedupartist7256 3 жыл бұрын

Does the Mod Podge turn yellow after time? I've had other artists tell me it does but they aren't professional like you and the other KZfaq greats.

@naptimecreations 3 жыл бұрын

Thanks so much for watching🤗 I personally haven't noticed that it yellows over time. I have heard people say that too. If it did yellow it would only show yellow if your piece has a lot of white in it. Most of my pours don't have much white in them so I haven't noticed any yellowing. Hope that made sense 🤗

@nancymassey221 3 жыл бұрын

When can you do the Wendex?

@naptimecreations 3 жыл бұрын

Thanks for watching, I wait at least a week to windex 😊

@lindalester9151 Жыл бұрын

Edited: Thank you for the Mod Podge recommendation going on before the resin! Anyone know how to clean the silicone on a glass substrate? I just did a pour on a huge piece of glass, and it turned out great. I don't want to ruin it. Thanks

@naptimecreations Жыл бұрын

You can use the mod podge on the glass too. It will seal the silicone in 🌹 thanks for watching

@lindalester9151 Жыл бұрын

@@naptimecreations should I still spray the Windex first?

@naptimecreations Жыл бұрын

@Linda Lester no, just dab with paper towels to absorb excess oil on the surface

@lindalester9151 Жыл бұрын

@@naptimecreations Awesome, thanks so much🙂

@naptimecreations Жыл бұрын

@@lindalester9151 no problem 😊

@ssue4q 3 жыл бұрын

This is a beautiful piece even though I'm not a fan of black and white and gold it's absolutely gorgeous. I MAKE my OWN GLASS CLEANER and have for decades. It HAS ammonia, water, and vinegar would that be safe to use? I've seen other artists that use rubbing alcohol or Dawn dish soap with paper towel. But they do have a little color just a very little on their paper towels. But I saw no color on your paper towel from the glass cleaner.

@naptimecreations 3 жыл бұрын

Thank you ❤❤❤ that's so cool you make your own glass cleaner. Yours should definitely work, mine the walmart brand has ammonia in it and none of the paint came off my canvas. Yay 🤗 thanks for watching ❤

@ssue4q 3 жыл бұрын

@@naptimecreations thank you so much! Because I wasn't going to go buy glass cleaner that's for sure. LOL PS my dad's actually the one who told me about that recipe lol

@naptimecreations 3 жыл бұрын

That's so awesome, I know mine has some ammonia in it because I can smell it when I use it 😉😊❤

@moniquew3958 3 жыл бұрын

I have MP but it’s matte and not gloss. Is that okay?

@naptimecreations 3 жыл бұрын

Thanks for watching, that's fine it works too 🤗 your resin top coat will bring the shine back.

@carolperez1426 3 жыл бұрын

what is mod podge used for?

@naptimecreations 3 жыл бұрын

Thanks for watching. The mod podge is used to seal in any silicone oil that may not have been cleaned off with the windex 😊

@sacorsha 3 жыл бұрын

What's the purpose of the modge podge?

@naptimecreations 3 жыл бұрын

The mod podge seals any silicone oil that may be left on the canvas. Anything you make with silicone oil needs to be sealed or you will get craters / pits / fish eyes in your resin finish. Silicone oil repels resin. The mod podge prevents that from happening because it's a sealer. Thanks for watching 🤗💙

@dannafrench1509 Жыл бұрын

What type/brand of silicone do you prefer?

@naptimecreations Жыл бұрын

Artist loft brand from Michael's website or in store.

@dannafrench1509 Жыл бұрын

Thank you!

@LorraineTapper Жыл бұрын

I followed your instructions but had to stop using the window cleaner as it started to reactivate the paint which was a pour on tiles and was painted 3 weeks ago. Now not sure what to do.

@naptimecreations Жыл бұрын

You can skip the windex and use paper towels to absorb the oil. Then use the mod podge. I've done it without windex before and it works too

@LorraineTapper Жыл бұрын

@@naptimecreations Thank you.

@beatrice3635 3 жыл бұрын

Hello, thank you very much for this sharing and this precious information. French, my ear does not always understand English well and I did not understand what you apply, three times, after the window cleaner and before the resin .. 🤔 what is it? Thank you

@naptimecreations 3 жыл бұрын

Thank you so much my friend and thanks for watching 😊 After window cleaner, 3 layers of mod podge gloss 😊

@naptimecreations 3 жыл бұрын

Let the mod podge dry a few hours in between layers 😊💜

@beatrice3635 3 жыл бұрын

@@naptimecreations Thank you for responding so quickly! Indeed, I looked online (after my post 😉) and I finally understood that it was simply varnish-glue .. 😇. That's great ! Because catching up with the famous fish eyes, well it's complicated 😱

@naptimecreations 3 жыл бұрын

@@beatrice3635 those fish eyes can be so disappointing 😅 Try it this way, it's so easy and works well everytime. Let me know how it goes 😊❤

@beatrice3635 3 жыл бұрын

@@naptimecreations I will try on a small canvas and promise I will tell you the result 🙂 One last question and I won't bother you anymore .. 😇 How best to make up for these holes ..? 🤔 Despite a good cleaning with the window cleaner + baby wipes and 2 layers of resin, they come back, form again when drying. 😤😭 (including on 1 canvas or there is only paint and water 😱😥😓) Has a solution or is it definitely dead ..? 🤔🧐

@Dragon100277 3 жыл бұрын

Is it okay to windex on any type of pour no matter if you use gloss or matte pouring medium with amsterdam acrylics? Also, does the mod podge really help seal the varnish from the silicone "in case" you missed some? But I just checked and I don't have windex. Anything else I can use?

@naptimecreations 3 жыл бұрын

Thanks for watching, the mod podge is a sealant so it does seal all the silicone. I did try another technique off camera and it works just as well. It's actually easier than this method to clean the silicone oil off. What you want to do is take paper towels and absorb as much silicone oil as you can off the surface of your pour. Then apply 3 coats of rustoleum gloss clear spray paint. Letting each coat dry before you do the next coat. After the 3rd coat is done then it will be all good to go and any silicone oil on the pour will be sealed in.

@Dragon100277 3 жыл бұрын

@@naptimecreations Ugh.... Just realized that I don't have Windex. I think I'll just use water and seal with Mod Podge. I don't see any visible signs of silicone, so maybe I'll just straight up mod Podge it without washing....Lol

@naptimecreations 3 жыл бұрын

@@Dragon100277 you can use straight mod podge too that will work just fine 🤗

@naptimecreations 3 жыл бұрын

@@Dragon100277 I would skip the water it might reactivate the paint

@Dragon100277 3 жыл бұрын

@@naptimecreations what about a little alcohol on a paper towel and gently wipe?