Hustler Drive BELT replacement Raptor sd 60 zero turn

Рет қаралды 23,649

Жыл бұрын

Bought a cheap replacement belt (ChangTa) and it bit me in the *ss. Hard lesson learned. Thanks for watching
-Ray
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or lose that my result from the improper use of tools, equipment or information contained in the video is the sole responsibility of the viewer and not Ray of all Trades. Please ensure that you take all proper recommended safety before attempting any project. Ray of all Trades assumes not liability for property damage or injury incurred as a result of any of the information contained in the video. If you would like to send a product for me to honestly evaluate or just things you think I could use, please mail to:
Ray of all trades
PO Box 6016
Fredericksburg , VA 22403
*Items will not be returned unless return postage is included
I appreciate each and every one of you!! Thanks for hanging out with me - Ray .
.
Please check out my friends channel at / @collectingwatches

Пікірлер: 49

@markmiller1835 8 ай бұрын

The best drive belt video I found for my issue

@RayofallTrades 8 ай бұрын

Awesome thank you so much!

@leonardwilkins3506 7 ай бұрын

Thanks for the view of how the belt appears on the pulleys, now I know I have to release the deck belt to get the drive belt over that part and up where it needs to be

@RayofallTrades 6 ай бұрын

I'm glad it was helpful. Thanks for watching!

@nicknwo4life 5 ай бұрын

Thanks so much for this video, I took one look and thought I'd have to take the entire machine apart to get the belt on, after watching your video I had the belt replaced and tools put away all in 10 mins, thanks so much again

@RayofallTrades 5 ай бұрын

You're welcome!

@DarrickSelders-bf6sh Жыл бұрын

The best video yet on this!!!

@RayofallTrades Жыл бұрын

Thank you so much! Appreciate you watching!

@aprilhaggard1462 2 ай бұрын

Thanks sooo much for your video! It took me a couple hours, but I got my drive belt and pulley switched out. Mower is running great! I ordered the pulley, belt, and tension spring from Amazon for less that $50!

@RayofallTrades 2 ай бұрын

Great to hear! Feels good to fix machines doesn’t it? Thanks for watching and sharing.

@antoniomacias8639 Жыл бұрын

Really appreciate it. Needed to figure out how to do this.

@RayofallTrades Жыл бұрын

Thanks so much for watching!

@sumralltt Жыл бұрын

Nice video - I would recommend vice grips to put the spring back on.

@RayofallTrades Жыл бұрын

Good advice! Thanks

@chidho2001 Жыл бұрын

Thank you very much.

@RayofallTrades Жыл бұрын

Thanks for watching!

@user-ew5ue7po9c 24 күн бұрын

Appreciate ya brother mine broke today.

@RayofallTrades 24 күн бұрын

Glad I could help. And thanks for commenting!

@mikeepp7053 Жыл бұрын

Let me add a comment here that will greatly help those who have a mower like mine. When you try to put the belt on the tension arm can be easily pulled back. If you look on the side of the mower there is a hole on the bracket that holds the 5 inch anti tip wheel. (just in front of engibe exaust) It's just above the wheel. I was able to insert a long 3/4 inch ratchet entention thru that hole and pull the tension bar back safely while i manuevered the belt in position. Apiece of rebar would also work. This makes it so much easier.

@RayofallTrades Жыл бұрын

Awesome! Thank you so much!

@angelbaker1068 9 ай бұрын

Where will u order your spring from??

@RayofallTrades 9 ай бұрын

Thanks for asking. It in the "more" section in my video description

@angusblack9900 Ай бұрын

Just replaced my belt on hydrostatic pulleys, took about 1 hr. My clutch switch was in front so i unhooked it up on top by motor it was a lot easier. I believe i can do it quicker next time. If i still have the mower . I picked up back end with tractor loader made it easier to work on.

@RayofallTrades Ай бұрын

Nice work! I might try that next time

@johnp.schilens8276 5 ай бұрын

That's why these places like hustlers getting 92.00 I got a raptor SD I had to replace the deck to deck spindles and two belts two transmission I did all myself and I saved myself

@RayofallTrades 5 ай бұрын

That's fantastic!

@johnp.schilens8276 5 ай бұрын

But once you know how to put that transmission took me seven times to did it four or five

@RayofallTrades 5 ай бұрын

Good machines but lots of tricks to fix them

@eiserntorsphantomoftheoper2154 10 ай бұрын

Only trouble I had was getting the wires plugged back in.

@RayofallTrades 10 ай бұрын

Yeah crazy how if it moves at all they never line up. 🤔

@blaine6097 Жыл бұрын

Thank you so much. So grateful for this video

@RayofallTrades Жыл бұрын

Thank you for watching!

@blaine6097 Жыл бұрын

@@RayofallTrades you saved me God knows how much money from having to trailer the machine back to the dealer. Youre more than welcome. I subscribed

@RayofallTrades Жыл бұрын

@@blaine6097 awesome thank you!

@lindacarney9008 Жыл бұрын

Oh my gosh…you do NOT have to take any bolts of!! It is sooo much easier than this!

@RayofallTrades Жыл бұрын

Oh cool. Please elaborate to help future visitors. I appreciate your input.

@eliteoutdoor7203 6 ай бұрын

The PTO bracket does not have to come off. And if you take a pair of 45° angled needle nose you can pop the spring right on and off of the tensioner arm. Should be able to change this belt in less than 10 minutes

@angusblack9900 Ай бұрын

@@eliteoutdoor7203I wish you had been here yesterday,

@stephenbartram7377 9 ай бұрын

That knobby belt is junk They will always fail too quickly OEM replacement Stens 265-854 Replaces scag 48553 Just put it on big dog mp alpha 60 inch ( same as hustler ) not the magazine lol

@RayofallTrades 9 ай бұрын

Haha glad you clarified and thanks for the tip! I Appreciate you

@1975honeycuttnc Жыл бұрын

That’s a rotary brand belt. They suck

@RayofallTrades Жыл бұрын

I agree. I try to get oem when available. Thanks for watching

@sherrischneider2794 11 ай бұрын

You took off way too much hardware. There are other KZfaq videos that are much easier on changing that belt.

@RayofallTrades 11 ай бұрын

Oh cool. I didn't know there was an easier way. Thanks for sharing

@Chris-hp4rd 8 ай бұрын

Yeah everyone does things differently so I wouldn't disagree, but I didn't unplug the harness or take the bracket off.

@angusblack9900 Ай бұрын

@@Chris-hp4rdI didn't take the bracket off but I had to unhook the wire.

@fideauone3416 28 күн бұрын

@@angusblack9900 My wire plugs in at the front and I had to take the bracket off. Could not see the wire plug without a mirror. Also had to take off a skid plate before I had room to reach up to get the belt in. I was working from the floor with the back sitting on blocks so I didn't have a lot of room. I have found that every mower or any other equipment is almost always different from what I see watching these videos. That original belt is now obsolete and the new ones are not segmented. They are a little wider making it a bitch to get over the pulley as it hits the frame. That was the hard part.