Mini Truck (SE01 EP22) Choke stuck, Adjust Valves, Check Spark Plugs, Set timing, S83p HiJet
Рет қаралды 62,131
5 жыл бұрынWith the poor gas mileage I decided to check some things on Mini, well.. Her choke is not working, needs parts, so adjusted, timing, valves and checked the spark plugs. Runs good besides the choke issue which I have open all the time now instead of closed. Specs below.
Part links for the minitrucks:
www.motocheez.com/hijet-mini-...
www.motocheez.com/suzuki-carr...
Get your keyfob, Merch at www.motocheez.com/merchandise
MiniTruck playlist goo.gl/EztFd8
_____________________________________________________________________
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock. Amir has about 60 units in stock, he was very helpful.
States legal www.iihs.org/iihs/topics/laws...
Researching online I did find l lot of information, but Amir explains a LOT more than I knew, he has been in the business for 15 years. Plus if Bubbles in Trailer Park Boys has one, it HAS to be cool!
Don't forget you're buying a used vehicle, check it all out, they're over 25 years old! Some are in much better shape than others. Check for leaks, CV boots ripped, Loose suspension, Clutch slippage, clunks etc. Just like any used vehicle
S83p specs:
660cc 4 vavle 3 cyl engine 48-53hp carburated
weight: 1500 lbs
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I purchased mine at Boeki USA, www.boekiusa.com has their updated inventory. Ask for Amir and tell them MOTOCHEEZ sent you!
East coast 212-729-8293
West coast 360-990-7770
I know there may be other videos of this.. but this is my Cheezy style!
More info (Wikipedia):
The Daihatsu Hijet (Japanese: ダイハツハイゼット) is a cabover microvan and pickup truck produced and sold by the Japanese automaker Daihatsu since 1960. Despite the similarities between the Hijet name and Toyota's naming scheme for its trucks and vans (Hiace and Hilux), the name "Hijet" has been in use for Daihatsu's Kei trucks and Microvans since 1960, over two decades before Toyota took control. "Hijet", one of Daihatsu's other mini-trucks. The Hijet competes in Japan with the Honda Acty, Subaru Sambar, Mitsubishi Minicab, Suzuki Carry and the Nissan Clipper.
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. so you buy now!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Memes etc: Ice Cube. Friends. The Shining.
Music clips: Breakout, Foo Fighters. When you're in love with a beautiful woman.
Movie clips: SNL. Dumb and Dumber. Bruce Almighty. Idiocracy. Old School. Sears commercial.
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
@MotoCheez 3 жыл бұрын
Part links for the minitrucks: www.motocheez.com/hijet-mini-truck www.motocheez.com/suzuki-carry-dd51 Get your keyfob, Merch at www.motocheez.com/merchandise MiniTruck playlist goo.gl/EztFd8
@Z-Bart 5 жыл бұрын
BEST editing on KZfaq!
@MotoCheez 5 жыл бұрын
TY😁
@michaelgemmer2806 5 жыл бұрын
For sure!!!
@DatBoiOrly 5 жыл бұрын
Like that video went Soo quick shows how enjoyable your content is
@MotoCheez 5 жыл бұрын
TY😁😁 I have a ton of older vids, mostly motorcycle stuff tho
@Sarnoth1984 5 жыл бұрын
Ill never own one of these but I cant get enough of your channel. Like your style, enjoy the editing and the clip choices. Very fun to watch.
@MotoCheez 5 жыл бұрын
Thanks!!
@carterhayes946 5 жыл бұрын
You made me smile! Beep Beep. Yeah, another mini truck episode.
@MotoCheez 5 жыл бұрын
😁😁👍🏻
@jakedodd5000 5 жыл бұрын
Love it when the mini truck makes a meep sound😄
@MotoCheez 5 жыл бұрын
🔥🔥
@goofyleo3869 5 жыл бұрын
Always a great day when I can start it out with a fresh, delicious and piping-hot Mini-Truck vid. I also applaud your use of anti-sieze. 😬
@MotoCheez 5 жыл бұрын
Woohoo😎😎😎😎🔥🔥
@kylebarns7129 5 жыл бұрын
It's nice how the mini is pretty easy to work on.. kool video, thank u.
@MotoCheez 5 жыл бұрын
It's easy so far, clutch very soon! Thanks😄
@thomasenger3358 5 жыл бұрын
Love the videos. It makes my day when I see the new vid go live. #whatsupminitruck
@MotoCheez 5 жыл бұрын
TY!
@pnw.minitruckmadness9032 5 жыл бұрын
Great Job Motocheez, love mini...
@MotoCheez 5 жыл бұрын
TY 😁
@mattgreen9323 5 жыл бұрын
Great job moto Cheez got it all fixed up nice
@MotoCheez 5 жыл бұрын
TY
@Melicoy 2 жыл бұрын
Great Video. Thanks !!!
@dangle0921 5 жыл бұрын
Love these freaking videos man.
@MotoCheez 5 жыл бұрын
TY!😁😁
@justinsane7128 2 жыл бұрын
Awesome . 😎
@vroomoon 4 жыл бұрын
I do have to say I'm digging this editing.
@MotoCheez 4 жыл бұрын
Thanks 😁
@johnthefox6239 5 жыл бұрын
I like how your videos are paced, the editing and way you talk in the videos all fits together quite well. Good job. 👍
@MotoCheez 5 жыл бұрын
Thanks!!😁
@ClaytonGambrel 5 жыл бұрын
Love the evil morty part, damn you it's my cell ringtone and made me look 😂
@MotoCheez 5 жыл бұрын
😄😄😄
@squidfizzy 4 жыл бұрын
I started watching these videos last night and I'm on video 20 something. Cool videos man, keeps me wondering what you are going to do next.
@MotoCheez 4 жыл бұрын
😁👍👍👍
@mikeharlick3513 4 жыл бұрын
About to mess with my timing and carb this weekend. Purchased a timing light and everything. Haven’t used one in 25 years but I remember it being easy (famous last words). Watched a vid on setting the carb so hopefully I don’t have to mess with the choke too. Love your videos man. Keep ‘em coming.
@MotoCheez 4 жыл бұрын
Awesome. Thanks!
@myrenschwartz4544 4 жыл бұрын
I am really digging the vids MotoCheez. My ride, I just changed the oil as the motor was really noisy and the oil was more than dirty, it was ridiculous, it smelled like it had gas in it, I did an oil change after matching up a filter code. I poured in some 10w-30 Valvoline to run her through her paces, motor sounds good, still has the tick so I am fittin to adjust that valve-train as soon as I dig up some info on clearances, I imagine she needs a good adjustment. As my ride is somewhat limited in it's farm use, no locking diff and a limited slip rear, my customization flavor is ever so leaning more and more towards a "Jaw Shattering" street application, (No matter How SICK the modification may be).... . I have searched high and low and haven't really found much as far as modified street touring mini-trucks.... Any ideas folks? I know they are doing it on the streets of Japan though, the mini-truck is Japan's youth oriented hot-rod. My artistic flavor is affording me with visions of conversions which would vastly alter the appearance of the average mini-truck. I am more interested in finding a rebuild kit for my 1995 KIA motor as well as a small turbo kit. I have a few really sick ideas I want to put together and this cheap ticking, smoking KIA makes a great candidate for a wild Street touring Mini -Truck that can turn heads on the street yet still handle things round the farm-front. I got some forward thinking ideas recently when I saw video of a newer Suzuki turbo mini-truck , it did a 0-100 and stable like it was on rails.... It wasn't super fast but it was mighty quick with the four speed it had.... I know all these parts are in Japan and readily available but I can't currently locate a contact point as of yet... ...I never give up...... Cheers.
@GreyBeardz 5 жыл бұрын
I have that same timing light. Sad thing is I bought new. Glad you didn't "tappet" out after the first valve adjust wasn't correct. Well done!
@MotoCheez 5 жыл бұрын
I bought mine new too!😎
@brentcurtis5362 4 жыл бұрын
Love when you ask mini truck questions and always get a beep beep. Lol
@tallguy2497 5 жыл бұрын
I have an Alexis and when you said her name, my Alexis lit up. Too funny.
@MotoCheez 5 жыл бұрын
😄😄 I wondered if Alexis would trigger Alexa, now I know!!
@MrJeffdahmer 5 жыл бұрын
The best part of reference humor is somebody was already funny so you dont have to be. Haha just fucking around enjoying the content.
@MotoCheez 5 жыл бұрын
😁👍👍
@fupabox 4 жыл бұрын
Check for vacuum leaks to the choke ,also check the coolant hoses going to the choke . There is a wax pellet system for opening the choke once the coolant heats up..if the coolant hoses are clogged ( not many JDM vehicles ever get their coolant changed or flushed ) the warm coolant may not get to the choke pellet
@DeathWireGaming 5 жыл бұрын
Rad mini truck videos👌🏽
@MotoCheez 5 жыл бұрын
TY TY
@gordonstroup1741 5 жыл бұрын
"ALEXIS, put on Van Halen"! That was friggin' hilarious! Loved it. Anyway, you have to know that poor old "Mini" loves all of the attention that you have been giving her, and she wants to do right by you and struggles as much as she can, but those "Hi Top Sneakers" that you gave her (taller tires), really makes her not give you the best mileage that she can. Yes, she is one proud little lady, looking all fine and dandy, but it's hard on her. Anyway, love what you do & following you is fun. Keep up the great work. Gordon.
@MotoCheez 5 жыл бұрын
HAha. TY, I just put ANOTHER set of tires on.. these are the ones!! Will be in upcoming video
@auzzool 5 жыл бұрын
I just got one of these bad boys as a daily driver (I've been told I'm crazy) 5 speed '99 hijet 4wd for 6000$ Canadian, 74000km on the engine, with snowplow, winch, hitch receivers on the front and back, 3 sets of tires, 2 inch lift and strut springs both which didn't get put in by the previous owner. Your videos have been a godsent helping me every step of the way keep em comin'!
@MotoCheez 5 жыл бұрын
Nice!! Daily is fine, I wouldn't drive my highways here with it because ppl do 75 plus. I'd do secondary roads all day. Thank you😁
@aworminmybook8234 5 жыл бұрын
be careful. remember, you are the crumple zone!
@Bengineer-K 5 жыл бұрын
I go to the Coast Guard Academy and the maintenance dept has like 30 of these and every time I see these running around I wish I had one like yours! Keep up the awesome work!
@MotoCheez 5 жыл бұрын
👍👍thanks. Make a video yelling "what's up minitrucks!" and I'll use it like beginning of this video 😁
@Bengineer-K 5 жыл бұрын
Will do! And just ordered my own #WUMT shirt👍🏻
@MotoCheez 5 жыл бұрын
I saw, TY!!
@phineasNBJ 5 жыл бұрын
@@MotoCheez Minis're always ready for the call. We place our trust in thee. upload.wikimedia.org/wikipedia/commons/6/60/080911-G-0694D-014_%282888222922%29.jpg
@MotoCheez 5 жыл бұрын
❤️❤️❤️💯👍🔥🔥
@corbinlarson4381 5 жыл бұрын
I suggest a lineX bed liner paint job or just the bed. I like your videos on the mini truck allot.
@MotoCheez 5 жыл бұрын
TY, I'll probably white Rust-Oleum first the bed line later on
@jamescobun7395 5 жыл бұрын
@@MotoCheez I have used the Rust-Oleum type before, but it pealed up with in 3 months. Yes it was applied after sanding to bare metal and cleaned with acetone.
@MotoCheez 5 жыл бұрын
Damn. I was talking about regular Rust-Oleum paint. Oil based to help against the rust, I've been using on frames for years with good luck. Only thing I don't.like about a liner type is if you have to weld or repair...
@jamescobun7395 5 жыл бұрын
@@MotoCheez I know how you feel. I have had everyone of them fail. Then again I do have one that hasn't failed yet and it has been on for the last 24 years. It was made for heavy equipment as both undercoating and bed liner. The company that made it is no longer in business tho.
@MotoCheez 5 жыл бұрын
👍👍👍
@tstanator 5 жыл бұрын
It's getting to the point I'm half expecting you to change the channel name to Minicheez. Can't wait for the "waiting on overnight parts from Japan" episode!
@MotoCheez 5 жыл бұрын
Hahaha. Minicheez!! That's Good 🔥🔥🔥
@Wearyman 5 жыл бұрын
@@MotoCheez And you now have a name for the Minitruck!
@MotoCheez 5 жыл бұрын
😁😁😁
@Scotty_in_Ohio 5 жыл бұрын
It's always the choke pull-off - at least that's what Click and Clack would say... Have you thought about a manual choke? You'd be old school for sure. Can't get enough of that Mini Truck!
@MotoCheez 5 жыл бұрын
Yes, I think I'm going to buy a cable, I rather have manual choke tbh. If I ever change the carb I'll go back. Easy conversion.
@Jim_woods 5 жыл бұрын
I binge watch all your videos on the mini truck the other day and was hoping you would make a new video soon
@MotoCheez 5 жыл бұрын
😁 thanks
@Jim_woods 5 жыл бұрын
@@MotoCheez and I think now I have mini truck fever. I've been checking online all over the place where to get one around where I live.
@MotoCheez 5 жыл бұрын
🔥🔥😁
@josephboley 5 жыл бұрын
what's uuuuupppp mini truck!!
@MotoCheez 5 жыл бұрын
Whoa ohh ohh
@michaelgemmer2806 5 жыл бұрын
MiniTruck seems to like it when you diddle her bits!
@MotoCheez 5 жыл бұрын
She sure does!🔥
@Jeff-xn1ew 5 жыл бұрын
Mini truck 👍🏻👍🏻👍🏻👍🏻
@MotoCheez 5 жыл бұрын
😄👍🏼
@bigwheelsturning 5 жыл бұрын
Good to see you using anti-seize on your plugs. Grease/oil on rubber gaskets keeps them fresh. I like to use petroleum jelly. Interesting to see that the engine is sitting sideways in the truck. Looking at the hole to the engine made me think of all the times I had to work through the hole in my VW bus.
@MotoCheez 5 жыл бұрын
Yes and petroleum jelly makes some rubber more pliable. Ah, yes the ole VW bus!!
@bigwheelsturning 5 жыл бұрын
@@MotoCheez You need to find a way to "lift the bed" off the truck to get better access to the engine. Especially when you do the clutch. You have another shop, garage, or barn to hang it in while you work on the truck?
@MotoCheez 5 жыл бұрын
Yeah. I've seen people take the bed off. Easy
@jimcambron9047 5 жыл бұрын
I am looking to buy a Mighty boy... your work on the larger 3 cylinder engine (mine will be 550cc) should be very informative! Fortunately , mine will be sitting straight up so setting the timing will not be such a PITA... keep up the good work!
@MotoCheez 5 жыл бұрын
I've never seen those. TY
@wearemilesfromnowhere4630 5 жыл бұрын
Keep on getting on minitrucks backside... Maybe a reach around is in order. Great vid.
@MotoCheez 5 жыл бұрын
😄😄😄
@MichaelMcFearin 5 жыл бұрын
Didn't know the mini truck was a mid-engine sports car at heart! ^_^
@MotoCheez 5 жыл бұрын
😁😁👍
@43srgrock 5 жыл бұрын
BEEP BEEP Mini truck👍🏻
@MotoCheez 5 жыл бұрын
BEEP
@christopherdoyle1390 5 жыл бұрын
I love mini truck horn lol
@MotoCheez 5 жыл бұрын
🔥🔥👍
@shawnnelson6146 3 жыл бұрын
Man Im having a time getting a DD51T to start. It was one those projects that 'It ran just fine last October' This spring wouldnt even pop or nothing on starting. Have spark, new rotor, cap and plug wires. Set the valve lash. Found a couple vacuume lines off and reinatalled them. It almost wants to start now, yet not
@MotoCheez 3 жыл бұрын
Hmm. Try starting fluid? If works it's fuel. If not may be electrical
@CCRider5312 5 жыл бұрын
All Right 👍 Maybe you can get ur MPG higher! Yeah i knew there was a problem when U said 18 mpg when that truck should be getn a minimum of 35 MPG. Yeah that sticking choke can really run ur MPG lower. Thats why i mentioned a Carburetor clean. I hope U get her figured out, it'll save U a ton $ in fuel & Mini will feel better! 👍
@MotoCheez 5 жыл бұрын
Yes. More power too!
@RatdogDRB 5 жыл бұрын
I too, have been wondering why she's guzzling fuel so much. A SeaFoam treatment wouldn't hurt her either. Warm her up, and feather the throttle as you pour SeaFoam down the carb throat, let her stall out and then sit overnight. It'll smoke like hell while pouring it down. And, the next morning, will smoke like hell some more while you wonder what the hell you just did to your beloved. Then, the smoke will clear and she'll smooth out and purr nicely. A third of a can of it in the crankcase a day before an oil change will clean things up too. Great stuff, works better than Sta-Bil as a fuel conditioner/stabilizer too.
@MotoCheez 5 жыл бұрын
Seafoam!! Good idea
@muddyducker3336 5 жыл бұрын
Heading to Japan later this year and talking with an importer to try and get into one of the auctions...and maybe buy a mini truck of my own! Your vids are making me impatient!
@MotoCheez 5 жыл бұрын
Haha. Sorry. I believe you can import online through many places. Or you want to become a dealer?
@muddyducker3336 5 жыл бұрын
@@MotoCheez oh yeah we can...but be honest man. Being in a place chock full of mini trucks....the joy it would bring your loins....=-O
@MotoCheez 5 жыл бұрын
😄😄😄🔥🔥🔥
@ardysmith9987 5 жыл бұрын
Mini-truck should have a permanent smile decal ( beep) that's right mini-truck let him know,lol 🚚. You should build mini- truck a roll- bar with crossing samurai swords across the back an give him a black paint job with red accents ninja mini-truck. Great 👍 videos.
@MotoCheez 5 жыл бұрын
Hmm, I like it...💯
@SIXPACFISH 5 жыл бұрын
Anti-seize is Da Bomb! Hell Ya, Brother!
@MotoCheez 5 жыл бұрын
Good shit!
@shanebirge1343 5 жыл бұрын
@@MotoCheez get one drop on ya and the next thing you know youre looking like the tin man
@MotoCheez 5 жыл бұрын
I know! When I went back to adjust valves again, I even wiped the areas and STILL looked like the tinman. Hahah
@radarw64 5 жыл бұрын
I'm glad you didn't leave the valves clacking. Next you could convert it to electric.
@MotoCheez 5 жыл бұрын
Maybe someday, I have a mountain I own behind me and hauling wood etc, I'm not sure electric would be a good fit for my situation.
@randyspeer2165 4 жыл бұрын
Was that Blonde Redhead in one of your musical 'transitions'? Respect. I'm enjoying the series a lot. Can't wait to get to the pontoon boat too!
@MotoCheez 4 жыл бұрын
Thanks. Yes that’s my son
@vharrald 5 жыл бұрын
Hey moto, if you have any questions about engine stuff there is a guy on KZfaq that could probably help. I think he is in your neck of the woods (so to speak). He's in new Hampshire. He goes by musti1 on KZfaq. He is a jack of all mechanic.
@brianwatson3705 5 жыл бұрын
Dude can repair anything
@MotoCheez 5 жыл бұрын
Cool thanks!
@colonel9990 5 жыл бұрын
Truth. Mustie1 is a genius on a lot of different content. After following him on KZfaq for a while he started to post videos of his CUSHMAN Meter Maid. I ask him if he'd like to join our CUSHMAN TRUCKSTER Facebook page, and he actually accepted.
@colonel9990 5 жыл бұрын
If anyone wants to join the best CUSHMAN page on Facebook here's a link. facebook.com/groups/487997247912630/?ref=share
@toejamr1 5 жыл бұрын
MotoCheez did you not know about Mustie for real? You’re in for a treat if so. His vids are great.
@milleb17020 5 жыл бұрын
"Who put the antifreeze in my carburetor, YUCK."🤣😎
@MotoCheez 5 жыл бұрын
😄😄😄👍
@josephnicholas4221 5 жыл бұрын
whats up mini truck
@MotoCheez 5 жыл бұрын
Whoa ohh ohhh
@thetopgun2 5 жыл бұрын
That horn though
@MotoCheez 5 жыл бұрын
😄😎👍
@mikedieser4157 3 жыл бұрын
Great episode MotoCheez..... Unfortunately, Not all mini-trucks are the same.... I chose the ugly duckling, a KIA Metro. I recently went to adjust the valves, the present valve clearances were way off from the ones quoted in the video, KIA must have much closer tolerances..... Needless to say, I couldn't get an .008" gauge through so if a valve or two were .001" off, it may tap.... So hard to call it.... AWESOME EPISODE..... Cheers!
@MotoCheez 3 жыл бұрын
Damn.
@mavericmorph5358 5 жыл бұрын
Once you get that choke sorted, I reckon you'll be looking at about 35+mpg with those tyres.
@MotoCheez 5 жыл бұрын
👍🏼👍🏼👍🏼🔥🔥😎
@craptasticspeed6168 5 жыл бұрын
Number 6 and I'm getting a minitruck I'll be getting it Tomorrow for my birthday
@MotoCheez 5 жыл бұрын
Sweet!! Happy birthday!
@craptasticspeed6168 5 жыл бұрын
MotoCheez I can't wait for my own minitruck
@MotoCheez 5 жыл бұрын
👍👍
@captianjessie1 5 жыл бұрын
Speed happy birthday amd have fun with your mini truck
@ethanol7139 5 жыл бұрын
I want a mini truck now.
@MotoCheez 5 жыл бұрын
❤️❤️👍🏻👍🏻😎😎😎
@Liberty4Ever Жыл бұрын
I saved this one to my Hijet play list for spark plugs, valve adjustment and timing. Loving all of your mini truck videos. How much should a mechanic charge for a Hijet clutch replacement? I have the parts but don't want to work outside in the winter.
@MotoCheez Жыл бұрын
It's pretty basic, I'd think under 500
@mmaaddict78 5 жыл бұрын
When you're driving the mini truck down the road, you should splice a B-17 Flying Fortress into the video. That's what the tire noise reminds me of.
@MotoCheez 5 жыл бұрын
😄😄👍 good idea
@tkskagen 5 жыл бұрын
Nice CATCH with the Choke! The "Average Joe" would have NEVER caught that... Your OBVIOUSLY an Mechanicaly Advanced person! Another AWESOME video Bro.:-P Shirts on Ebay?! You have Stickers yet? MEEP-MEEP! MUCH RESPECT!, -Thomas Skagen Port Orchard, Washington
@MotoCheez 5 жыл бұрын
Thanks, I want to think I'm mechanically inclined. 😎😁
@MotoCheez 5 жыл бұрын
No stickers yet, just key tags... I have the template, I should look into them.
@tkskagen 5 жыл бұрын
@@MotoCheez What's the cost for an Adult Small Black T-Shirt? As I am a "scrawny" 152lb 5'9" 45yo... Sadly, I typically have to shop in the Kids Section for Kids XL T-Shirts... :-( And, what are the Key Fobs going for, if they are for sale?... You definitely have my respect, given that you Talk to your Mini, and your Definitely Mechanicaly Inclined, as compared to most of these Kei Truck owners out here! Are you "possibly" interested in information about how to perform a "CORRECT" Engine Swap in MINI and keep the 2WD/4WD abilities? :-O I'm currently looking into an engine swap for my (getting soon ~4 to 16 months out...) on a JDM1994 Suzuki Carry that will be licensed for Road Use, but the HP is pathetic... So I have reached out to about 8 Utuber's for their recommendations for a practical engine swap, with "ACTUAL use as a Daily Driver" as a priority... Once I hear from these potential individuals. I will forward their info, AFTER I check it out for functionality AND cost! Keep it Real Mini (Meep-Meepers!), -Thomas Skagen (NOOB) Port Orchard, Washington USA
@tkskagen 5 жыл бұрын
@@MotoCheez YOU way 2 FUNNY!
@MotoCheez 5 жыл бұрын
The Ts are $12.99 and fobs are $9.99. They're linked in motocheez.com in "merchandise" section. Hmm, a good motor swap is probably the Subaru motor because it's flat. Only issue I can see is gearing too low with stock transmission unless you have a 5 speed.. larger tires raises the speed pretty good, looks like the turbos go right along too.
@trackbikepics 5 жыл бұрын
fupabox also has some videos on his truck from years ago. he does one on the carb.
@MotoCheez 5 жыл бұрын
I saw it
@REVNUMANEWBERN 5 жыл бұрын
THANKS big time for the "States legal" link, I had seen one of these in Florida for sale at a business and it had a official Florida tag so I assumed it was good ANYWHERE, but the link states for Florida ONLY on roads 35 mph or less thus the mini would be USELESS for me, your link saved me $$$ & headache because I wouldn't have any use other than on the ANY road.
@MotoCheez 5 жыл бұрын
I just had another guy commenting on a few others, that chart is for the newer minis. The 25 year and older gets registered as classics and are legal on main roads... I don't know, I'm still new 😁😁
@staytunedrodcustom5855 4 жыл бұрын
Look into a amr 500 off of a Toyota previa they are super small superchargers easy to install in thease
@MotoCheez 4 жыл бұрын
Ordered an amr300
@trackbikepics 5 жыл бұрын
at 8:54 the part you have your hand on controls the vacuum to pull the choke off check for leaks on the vacuum lines to it. i had issues of vacuum lines looking great until you pull them and look at the ends the inner portion of the hose can be cracked.
@MotoCheez 5 жыл бұрын
I'll check thanks. But the plunger doesn't move with heat either. The pulloff is working. I don't know about the cold air diverter in air can...
@trackbikepics 5 жыл бұрын
@@MotoCheez you have any manuals? I am looking through my downloads folder to see what i have left of hijet stuff. most of it is for the 100 series
@MotoCheez 5 жыл бұрын
I don't have manual. Do want to get one though. I don't know how close the 100 series is...
@trackbikepics 5 жыл бұрын
@@MotoCheez i have some 83 and 85 stuff too the
@rawlins2762 5 жыл бұрын
Whats up ... mini truck
@scruffy6151 5 жыл бұрын
Beep
@MotoCheez 5 жыл бұрын
😄
@MotoCheez 5 жыл бұрын
Whoa ohh ohhh
@ridepate 5 жыл бұрын
A little Harley bird told me you have another lift coming. :)
@MotoCheez 5 жыл бұрын
😎😎 springs... And they're awesome!!
@ridepate 5 жыл бұрын
@@MotoCheez I lov'em! Gave me about an extra inch too.....:)
@MotoCheez 5 жыл бұрын
Yep, same!
@shawnnelson6146 3 жыл бұрын
Your lucky your model has easy access to the carb. The 96 Suzuki DD51T its buried under the back of the cab. I have spark and fuel up to the carb. This truck was run for 11 summers up a loose gravel beach. It stutters through like it wants to start but wont catch. I will check w starter fluid tonite after work. 5pm Alaska time
@MotoCheez 3 жыл бұрын
Maybe the choke not setting on. Starting fluid will work if it's that
@shawnnelson6146 3 жыл бұрын
@@MotoCheez I used starting fluid. Nothing. This truck had the water pump and timing belt replaced, I checked it twice Set valve lash 6 thousandths on intake, 8 on exhaust, replaced the rotor, cap n leads and plugs. Almost acts like the throttle is blocked. Staring fluid should had done something
@shawnnelson6146 3 жыл бұрын
@@MotoCheez also checked the coil, it works now, didnt before. Which is odd for a truck that was running when parked
@MotoCheez 3 жыл бұрын
Timing belt replaced. Maybe valve timing Could be off?
@shawnnelson6146 3 жыл бұрын
@@MotoCheez It dawned on me, Firing order for the F-6A is one, three, two. I need to swap #2  ignition leads on the distributor.
@mickward2775 4 жыл бұрын
Awesome video I just got a 1990 daihatsu hijet van for my birthday. The previous owner had removed the carb and all vac lines so with it off I cleaned it and put the thing back on and it runs without any vac hoses except the ones for advancing timing and brake booster. I installed manual choke on mine. I will be posting a video soon maybe you can check out my van and channel. Btw Cool truck
@MotoCheez 4 жыл бұрын
Sweet. Yeah I'll check it out.
@ironwolfF1 5 жыл бұрын
At 12:50... purring like a iron kitten. ;-)
@MotoCheez 5 жыл бұрын
😁😁😁👍
@NorthShoreScout 5 жыл бұрын
showing us all her dirty bits!! how naughty!! that finger on the gasket was LEWD!!! lol awesome work bud!
@MotoCheez 5 жыл бұрын
😁😁😁😁👍
@zakthewarcat3172 5 жыл бұрын
that truck WAS eyeing mini truck in the parking lot ,she is such a sweet ride
@MotoCheez 5 жыл бұрын
He really was staring at her when I left the store!
@lifeofjett5235 5 жыл бұрын
What’s up mini truck?!
@MotoCheez 5 жыл бұрын
Whoa ohh ohhh
@Oddjob126 5 жыл бұрын
Thats probably where your problems starting it back up after she's been running for awhile
@MotoCheez 5 жыл бұрын
Yeah, floods itself!
@mqqnmypops 5 жыл бұрын
👍Nuff said, 🌮🍺🚚😎
@MotoCheez 5 жыл бұрын
🔥🔥👍
@nathandaniel4167 5 жыл бұрын
Finally first!
@MotoCheez 5 жыл бұрын
🔥🔥🔥👍
@johnclark499 5 жыл бұрын
Thanks for another great video. I can't wait for mine to get here from Japan. Tire question: Are those 23x8x12 tires on stock 4" rims? And how wide is the track with them? My trailer is 5'x10' but 57" inside the rails.
@MotoCheez 5 жыл бұрын
Those were 24/8-12, they'll still fit trailer
@johnclark499 5 жыл бұрын
@@MotoCheez thanks! no problem with 8" wide tires on skinny wheels?
@MotoCheez 5 жыл бұрын
Nope, I have a 2" lift too, but 23s would probably fit stock. The 24s did hit the bottom of door slightly better(a few videos back) with 7" mag wheels though, go figure
@hvguy 4 жыл бұрын
11 degrees? Always heard turn the timing to the stop and just use premium with cold plugs. More power 🤔
@MotoCheez 4 жыл бұрын
Can't go to the stop. Every truck is different and might be way too advanced. A few degrees is usually ok with premium.
@MadsWorld34 5 жыл бұрын
just a little tip the next times don't put the plugs back in it until yo adjust the valves. and i do have a question. what is a safe cruising speed with out blowing it up. do you think you can run 65 mph for 100 miles with out causing trouble.
@MotoCheez 5 жыл бұрын
I know, would have spun easier, with the larger tires and gearing I'd say 55moh, any more than that seems revved out. They do make any speed newer but can't recall year.
@Thatsoverrated 5 жыл бұрын
Hey man, have you checked out Hoonigan doing stuff to a minitruck? They're shoving a rotary in it!
@MotoCheez 5 жыл бұрын
Yeah, can't wait to see how it turns out.
@barthutchison4207 5 жыл бұрын
Is that a honda interceptor gas tank hanging? I had a 86 500 interceptor and it looks like the same.
@MotoCheez 5 жыл бұрын
It is, he has one in the garage he's working on. Good eye 😁
@swenstyle 4 жыл бұрын
Help with carb adjustment for S85? Any videos? Somewhere.
@MotoCheez 4 жыл бұрын
All I have is some carb adjustments for choke and throttle cable. kzfaq.info/get/bejne/osCBYLp1mtjNZoU.html
@niceguy4928 3 жыл бұрын
Thanks for the video . I have a 1992 Honda do you think it would be possible to pull the oil pan off , pull the pistons install rings and put back together. I bought one that was sitting 3 years or so and I can’t get compression back . The cylinders read 15, 30 40 psi.
@MotoCheez 3 жыл бұрын
I don't think you can pull the Piston out through the oil pan they'd have to be disconnected from the crank and pushed out through the head side. I would think a low compression like that would probably be because the valves aren't seating correctly did you try shooting oil and each cylinder and then trying again
@niceguy4928 3 жыл бұрын
@@MotoCheez yes sir I did. I am going to try to adjust valves and if all else fails pull the head. I think that is really low compression to the point it probably wouldn’t have ran after 80 or 90 psi . Maybe it’s rusted up. Idk but thanks for answering my questions.
@Kleinfreak 5 жыл бұрын
What's the altitude in your area? We're up around 5,000ft and I've definitely got a fueling problem on cold start. Not many high altitude jetting kits for the Sambar. There is a water line that runs through a thermostat on mine that is just for the choke regulation. I added a nickel sized spacer to my choke while fully extended limiting it as much as possible. Your plugs looked a lot cleaner than mine were (are). You could always wear a headlamp...oh.
@MotoCheez 5 жыл бұрын
I'm only at 600ft I'm thinking about just hooking up a cable choke. Mine always started great in the cold.. headlamp a good idea! I have a few LED
@neorecormon1769 5 жыл бұрын
the tire noise :DDDDD
@MotoCheez 5 жыл бұрын
New tires installed... Waaay better now
@CPUTests 5 жыл бұрын
She is using so much gas because of the tyres. Nothing more, nothing less. People don't seem to understand the difference a tyre make on the autonomy of a vehicle but it is huge! Sorry about my poor english.
@MotoCheez 5 жыл бұрын
Choke stuck closed. I did get better tires on today.. have to do clutch asap now
@truly1676 5 жыл бұрын
I just can’t get enough. I 💕 love you miniTruck. I’m waiting on a hot paint job or a fancy wrap. LMAO. Bling that sassy bitch out. One day I’m gonna have my own miss mini. Love how you bring her to life. She needs a rhino bed cover too...
@MotoCheez 5 жыл бұрын
TY, mini thanks you Beep! Liner coming as soon as warm weather hits
@Alennovak666 3 жыл бұрын
I just noticed something, correct me if im wrong, engine on pick up is more to the rear end depending on the Van engine placment. I have van and my engine is beneth the seats and more to the front end. Or am i mistaking?
@MotoCheez 3 жыл бұрын
I thought they were same from what I saw. Under the seat
@Alennovak666 3 жыл бұрын
@@MotoCheez i tought so, but your carb is on the outside and i fix mine from underneeth the seats. Maybe im wrong
@captsam54 5 жыл бұрын
lol.. Mini Truck guts.....
@MotoCheez 5 жыл бұрын
😄😄
@Motorider2018 5 жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍
@MotoCheez 5 жыл бұрын
😎
@blakehatfield5354 4 жыл бұрын
Dose your mini have the hemi motor 12 valve ? 660 cc
@MotoCheez 4 жыл бұрын
The Suzuki does
@Brady.John87 5 жыл бұрын
Never seen anyone put anti seize on plugs. Is that common practice? I have an 02 quad cab dodge dakota that has rust cancer. Im replacing the bed and body panels, the frame is ok but it has surface rust, same as alot of bolts and pieces of the engine. Should I put some anti seize on my new plugs when I do a tune up this weekend?
@MotoCheez 5 жыл бұрын
I do, it just makes life easier for the next time. I know Ford had a huge issue with plugs breaking off in the 5.4 heads, big job if that happens.. I even use on lug nuts sometimes, it's just messy!!
@Brady.John87 5 жыл бұрын
@@MotoCheez cool, thanks. My exhaust manifold has a big hole in it so i'm going to replace it this weekend. Im going to keep soaking it with pb blaster for a full day before I attempt to remove the bolts. I know my way around tools and can figure stuff out but I am not a very experienced mechanic. Ive never been so nervous to work on something lol
@MotoCheez 5 жыл бұрын
Ugh. I hate exhaust work... Rusty bolts
@Odd_Redneck 5 жыл бұрын
-LOL so the timing was too advanced. go figure. micro 6 puck clutch soon xD. gona get into "mini trucking" buahaha! i want to see one of these trucks on roadkill with fin.
@MotoCheez 5 жыл бұрын
😁😁😁👍
@aserta 5 жыл бұрын
Finn could prolly fit 3 of these in his mahooga of a trailer truck he got. :))
@scruffy6151 5 жыл бұрын
Just like any new toy find all the things that need to be fixed before you are truely happy with it. Hey Mini truck beep beep 😁
@MotoCheez 5 жыл бұрын
Yeah, little by little. Beep!
@fountainguy27 10 ай бұрын
what vacuum line are you pulling for timing ?
@MotoCheez 10 ай бұрын
Yes because when you have boost it would typically retard the timing and I said it at a specific timing I think it's 20 before top dead center so you don't get the detonation under boost
@GoKartsorGoneFishin 5 жыл бұрын
Beep beep!
@MotoCheez 5 жыл бұрын
BEEP!
@NBLife459 4 жыл бұрын
Hey could you help me out i cant figure out were couple vacuum line goes the one for the choke and one where the fuel pump is thnak you
@MotoCheez 4 жыл бұрын
I removed my heat riser valve. Not sure which lines you're talking about
@NBLife459 4 жыл бұрын
@@MotoCheez the one that is for the choke there 2 that goes to it and the one under the pump
@MotoCheez 4 жыл бұрын
@@NBLife459 I'll have to look for you. Maybe snap a photo
@thamrongwitdeesorn9216 3 жыл бұрын
I need vacuum diagram ef660 carburetor
@erklid2882 3 жыл бұрын
can you give me a link on the engine manual for maintenance?
@MotoCheez 3 жыл бұрын
I don't have one. I think there were some close online when I searched. The van type
@djmtexas 10 ай бұрын
I have the same truck can you help me adjust the valves. I am having a hard time.
@MotoCheez 10 ай бұрын
Make sure You're on compression stroke TDC the cylinder you're checking. If valves are tight you probably on wrong stroke and need to go 1 more revolution
MotoCheez
Рет қаралды 37 М.
MotoCheez
Рет қаралды 39 М.
МИЛАНА ТУТ 👀
Рет қаралды 7 МЛН
MotoCheez
Рет қаралды 29 М.
MotoCheez
Рет қаралды 794 М.
MotoCheez
Рет қаралды 25 М.
Oh Kei Garage
Рет қаралды 29 М.
Freedom 1 Garage
Рет қаралды 4,4 М.