MK5 GTI 2.0T FSI with GT3071 makes big gains with Water/Meth Tuning
Рет қаралды 11,168
Жыл бұрынWe tune this big turbo GT3071 2.0T FSI MKV GTI for water meth injection. We built this engine and turbo kit 11 years ago now and it's still holding up. Buy nice or buy twice as they say. This dyno session was worth the efforts as we seen great gains dialing in the tune and the W/M setup on this car with Eurodyne Maestro 7.
EuroDyne Maestro 7 Tuning Suite (VW/Audi)
comotorsports.ca/eurodyne-mae...
1 Gallon Water/Methanol Injection Kit
comotorsports.ca/1-gallon-wat...
ARP Head Stud Kit For 2.0T FSI/TSI Engines
comotorsports.ca/arp-head-stu...
FSI RS4 Injector Set Of 4 (079 906 036D)
comotorsports.ca/fsi-rs4-inje...
CTS TURBO MK5 2.0 FSI TURBO KIT
comotorsports.ca/cts-turbo-mk...
Autotech High Volume Fuel Pump Upgrade Kit 2.0T FSI
comotorsports.ca/autotech-hig...
IE 1.8T 144X19 Drop-In-Rods VW Audi
comotorsports.ca/ie-1-8t-144x...
CTS MK5 2.0T Direct Fit FMIC Kit
comotorsports.ca/cts-mk5-2-0t...
ACL Race Rod Bearing Set For VW/Audi 4 Cylinder
comotorsports.ca/acl-race-rod...
Support the channel on Patreon - / comotorsports
Support the channel with CO Merch
CO Motorsports Holographic Sticker 2 Pack - comotorsports.ca/co-motorspor...
CO Motorsports Pullover Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Zip-Up Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Shirt - comotorsports.ca/co-motorspor...
CO Motorsports Snap Back Hat - comotorsports.ca/co-motorspor...
CO Motorsports Beanie - comotorsports.ca/co-motorspor...
Tools we use.
Orange Nitrile Gloves
amzn.to/3wFWK2w
Bolt Extractor Set, Easy-Out Screw Extraction
amzn.to/3HvKtE4
Inspection Camera 7” 1080p
amzn.to/3R8PSnL
3M Safety Glasses
amzn.to/3Y1vQ0R
Grinding discs
amzn.to/3H6HzUU
Lincoln Welding Gloves
amzn.to/404S8jQ
TITAN 16138 9-Piece Low Profile Impact Triple Square Bit Socket Set
amzn.to/3XVRIuj
Digital Timing Light
amzn.to/3JkxJBL
Swivel Magnetic Spark Plug Socket
amzn.to/3JbZ4FV
GEARWRENCH 20 Pc. Screwdriver Set
amzn.to/3WDXlMR
Camera Gear
Sony Alpha ZV-E10
amzn.to/3DbAi52
Rode Compact On-Camera Microphone
amzn.to/3kCVudP
67'' Phone Tripod Stand & Selfie
amzn.to/3kxLSks
Audio Video Capture Cards Cam Link Card HDMI
amzn.to/3XOnJoe
Dummy Battery DC Coupler Kit for Sony Alpha A5000 A5100 A6000 A6100 A6300 A6400 A6500
amzn.to/400wyNE
20FT USB-C to USB-C Cable
amzn.to/3inpU2U
25ft HDMI to Micro HDMI
amzn.to/3wvcMwk
Camera Tripod, Mini Flexible Tripod Stand
amzn.to/3H6orXi
Milling
Carbide End Mill 2 Flute Square End Standard 1/4" Diameter x 3/4"
amzn.to/3WDJsy0
Accusize Industrial Tools 1/8'' Thickness 10 Pairs Precision Parallel Sets
amzn.to/3WBUrYL
Precision 123 Blocks, Two Pack
amzn.to/3XEQuUB
Deep Black Apron
amzn.to/3j8Ochx
Accusize Industrial Tools 2-1/2'' Cutting Diameter R8 Shank Indexable End Mill
amzn.to/3XT2KAE
Lathe Turning Tools, Boring Bar Turning Tool Holder with 10pcs CCMT09T304 Inserts
amzn.to/3kCPfql
Tap Magic Cutting Fluid
amzn.to/3HtG6cC
Carbide roughing End Mills, HRC45 Tialn Coated
amzn.to/3Del3Z4
Hold Down Clamp Clamping Set Kit Mill
amzn.to/3XV3vch
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...
@COMotorsports Жыл бұрын
This isn't anything anyone hasn't done before, we're just sharing and adding more data to the database. Thanks everyone for following along.
@pdee886 Жыл бұрын
The owner is definitely going to notice almost 100whp/ whatever wtq for sure! 3071 is my favorite choice on these cars, no doubt about it. Great work as always 👍
@jondiaz3475 Жыл бұрын
Loved my 2008 GTI! Thanks for the content.
@runawaytowtruck Жыл бұрын
❤ the video. Good info for my FSI build.
@jameshaulenbeek5931 Жыл бұрын
Those floating center caps...🤌
@COMotorsports Жыл бұрын
Didn't even notice. lol
@nivenbidassi2432 Жыл бұрын
My eyes light up when I see new content
@underdogproject9373 Жыл бұрын
Dang this thing have a nice torque curve and sound healthy
@TheRebuilt1 Жыл бұрын
Wow, that is impressive. Give props to the tuner :-) and a little to the water meth. For a car that light that 417 is sufficient...for now
@COMotorsports Жыл бұрын
Appreciate it, well worth the time on this one.
@richardroberti1192 Жыл бұрын
Love seeing it.
@Radec74 Жыл бұрын
Good stuff ☕ I wish my rabbit ran like that 🔥
@camerondowling155 Жыл бұрын
These videos are awesome, you need more views and subs 🤟🏻
@COMotorsports Жыл бұрын
We agree lol. Appreciate it.
@Unrealmotorsports Жыл бұрын
Love the content. I would like to see a video on Eurodyne. It would help a lot of people out. I know it takes along time because it’s a flash software but really and info would be great.
@COMotorsports Жыл бұрын
I still need to pay the bills. lol
@sethewan2102 Жыл бұрын
When you guys do a tune do owners ask for a dual tune? Tune for the street with 91 octane and tune with race fuel for the track? The owner can choose the setting depending on the kind of driving? Ie high RPM at the track, versus low RPM on the freeway after traffic mellows out, but not a chance to hit high speeds or high RPM.
@mirandajavier6446 Жыл бұрын
Saludos desde México 👍
@dustysteele5408 Жыл бұрын
Thanks!
@COMotorsports Жыл бұрын
Really appreciate the support. XOX
@pudermcgavin4462 Жыл бұрын
Looking to see some see tsi 1.8. I have a 15 just did the full unitronic GTI exhaust and stage 2 tune. It made aware my clutch does not like it but on order lol. At least I can drive it just can't actually enjoy it yet! And it's also a crappy 5 speed lol!
@jameshaulenbeek5931 Жыл бұрын
I've got a '16 1.8, but it's an auto. I don't feel comfortable tuning it, as supposedly the transmission is only rated for 250 torque. A DSG swap from a GTI would be fun...
@westonfields4320 Жыл бұрын
Will the 2.0 fsi have boost leaks if the bottom plastic injector o rings that seat in the head crack?
@jacovan-der-walt8593 Жыл бұрын
Love this channel. What kind of power can you get from a stock block Mk2 Leon Cupra with K04 turbo if you go stage 3?
@ahmedvalera4566 Жыл бұрын
360bhp+ depending
@haroldbutler778 Жыл бұрын
Yes i love science
@CliffB5A4 Жыл бұрын
Does the shipping work on your website yet? I still want to order merchandise to Australia.
@fernandoflores9600 4 ай бұрын
I was wondering, what do you do with the small hose that goes through the valve cover when you do big turbo upgrade? Do you cap it off?
@rjack151 Жыл бұрын
I need one.
@runawaytowtruck Жыл бұрын
Question live my BPY's but I have a mk5 sitting with no motor. What do you think about a 12v VR6 swap with yes a turbo
@nickgreene4273 Жыл бұрын
Love seeing fsi content getting my motor built soon any tips for getting to 500whp?
@COMotorsports Жыл бұрын
Fueling is the problem. Focus on that.
@CODxFUNxMAN Жыл бұрын
Makes me wonder what I can do with water meth. My FsI made 435 wheel on 21psi no aux fueling.
@haroldbutler778 Жыл бұрын
400whp on 91+meth damn
@slic1one Жыл бұрын
so would manual boost adjuster be enough of a safety measure for running out of watermeth in this case? Say I have watermeth tuned car, but I run out of it and have a long trip ahead - just lowering the boost and not going flat out be enough to not damage anything?
@COMotorsports Жыл бұрын
Depends how it's tuned. But the easiest is stay out of boost, or if it's tuned less aggressive on lower boost you can just turn the boost controller off.
@ramonvargas8553 Жыл бұрын
I have mk5 gti 06 I’m running big turbo GT2871r with unitronic tuned you guys can work Unitronic tuned better number get to 400hp I’m happy thank for video im getting idea👌👍🔥✌️
@nalle1881 3 ай бұрын
hello i got a mk5 gti 2.0 edition 30 that do 370hp with k04 turbo and stage 2 apr tunning. my questien is how much du you think it could get whit the methan and water and the gt3071 turbo
@ForRJ Жыл бұрын
That is great, over 90hp? I am tuning my S3 with a Vortex on wmi and unfortunately the gains won’t come close to that but still a bump from pump for sure.
@COMotorsports Жыл бұрын
It all depends where you're at for power, the capabilities of the turbo and how much pump gas is holding you back in your current configuration.
@jahndolo Жыл бұрын
Great stuff. I have an issue where my oil is getting diluted by gas. I've put in fresh injectors, followed by a new pump. Still getting dilution. I did reuse my autotech hpf internals on the new pump then put it back to stock but it made no difference. Gas is miixing with my oil. Any advise on what to check?
@COMotorsports Жыл бұрын
More than likely you have an injector leaking down.
@slo_nismo17 Жыл бұрын
Great power gains indeed. I have a b7 with the FSI in it with theJHM big turbo kit. The power is decent and it has been reliable I must say since it’s been installed almost 2 years ago. Do you think this engine is worth building and going with a bigger turbo or I was thinking of swapping it with a 2.7T , Vr6 or built 1.8 as my other options. I like the avant body. Any suggestions would be appreciated.. Thanks
@COMotorsports Жыл бұрын
1.8t unless strocker will be trash in the boat. Do a VRT.
@slo_nismo17 Жыл бұрын
@@COMotorsports Ha ha .. That’s the engine I was thinking of. I like the sound and power potential. I enjoy the channel. Keep up the great work and I really appreciate your feedback. Thanks
@COMotorsports Жыл бұрын
@@slo_nismo17 np thanks for comments and for following along.
@slo_nismo17 Жыл бұрын
@@COMotorsports Yes sir .. not a problem..
@TheRebuilt1 Жыл бұрын
just curious do you guys work much with GIAC tuning on 1.8T MKIV?
@COMotorsports Жыл бұрын
Not in a zillion years.
@SanchoVilla775 2 ай бұрын
Would you recommend a water meth kit for autcross?
@pullmyniblets Жыл бұрын
I wish the mk6 and under could run e85
@Jewishcatfish Жыл бұрын
Does putting water meth on a E85 or FlexFuel car show much benefit or bang for the buck?
@COMotorsports Жыл бұрын
E is doing most of the work, gains would be minimal.
@hyper8545 Жыл бұрын
Have you guys ever added a auxiliary injector to these mk5 or 6?
@COMotorsports Жыл бұрын
Definitely
@4BillC Жыл бұрын
I know y'all don't want to give away secrets but you can add more info about what you doing to get the gains. I have a 1.8T with a K04, E85 and methanol injection. Only makes about 300whp but I turned it myself. The people that would use the tuning "secrets" are the same people that wouldn't go to a tuner without them. I'm not saying go full nerd on info because most people don't want that much but a happy middle ground may help the channel. Just a thought is all! I like the fact that it's not a Honda or an LS... Lol
@COMotorsports Жыл бұрын
I state in the video, timing. However I filmed 90% of this by myself while I had a timeline to get the car done... So this wasn't the one for details sorry.
@4BillC Жыл бұрын
@@COMotorsports I wasn't complaining. Personally I like to get nerdy. But yes you did say you were adjusting the timing. It's the by how much and when. 2° here or there. Idk...
@COMotorsports Жыл бұрын
@@4BillC so the reason I don't get into that stuff much is because people hear what they want and then regurgitate it however they feel, be it elsewhere or in their own head. I seen it a lot on FB with the hooptie build and it's a perfect example. So many false things claimed or said that never happened or are incorrect. Which is crazy because it's in video format for someone to hear and see with their own eyes, yet people just hear/see what they want. So I'd rather not have someone be like "CO Motorsports said run 30* more timing on water meth and it's fine" when I said nothing of the sorts. I get it may help those that get it but it also has the potential to hurt a lot more for the bulk of the people who don't. With that said the real answer is listen to what the engine and dyno tell you. I adjust based on what the engine is happy with, and since not all setups are the same so it's not a straight answer.
@4BillC Жыл бұрын
@@COMotorsports you know what... I never thought of it that way. People do hear what want to hear. I see why you didn't get into specifics. And please don't think I was trying to be "nasty" in any of my comments. I absolutely love this channel! I was just thinking it would be nice to see the specifics, until some dummy blows up their car because they saw tuner on KZfaq do it! Side note... I wish I had access to a dyno!
@COMotorsports Жыл бұрын
@@4BillC never took it that way at all. Appreciate the comments and for following along. 👍
@haroldbutler778 Жыл бұрын
Eurodyne does take a while to flash. I have this software for my Mk6 R
@COMotorsports Жыл бұрын
It's ECU dependent. This specific one is 15-20 mins each time. The other MK5 FSI on our channel is also running Eurodyne and it only takes maybe 2-3 mins to flash.
@haroldbutler778 Жыл бұрын
@@COMotorsports interesting.
@hyper8545 Жыл бұрын
Cool mk5. How many miles?
@COMotorsports Жыл бұрын
200,000 kms
@road_2_pow_r Жыл бұрын
you guys forgot to mention what watermeth kit you used and the watermeths control method...
@COMotorsports Жыл бұрын
AEM kit on this one. Combo of old and new nozzles.
@road_2_pow_r Жыл бұрын
@@COMotorsports i bought the same kit for my r32 turbo, but only for one nozzle. what are your injection points?
@craponAsPTULA 2 ай бұрын
How would you compare tuning and building this platform compared to the 1.8t for a daily driver? Can you make comparable power for comparable money?
@COMotorsports 2 ай бұрын
It all cost money. And if you shoot for say 500whp they all cost the same.
@craponAsPTULA 2 ай бұрын
@@COMotorsports thanks for the reply. Another question, where would you recommend starting learning to tune? I'm a mechanical engineer and I've always wanted to start a project and learn to tune for myself.
@COMotorsports 2 ай бұрын
@@craponAsPTULA buy a POS, put standalone on it and try to keep it alive. :)
@craponAsPTULA 2 ай бұрын
@@COMotorsports Thanks again for the info, I'm thinking of buying a b5 a4 sometime to give it a shot.
@ronnieronnie8549 Жыл бұрын
I wonder what it would take to get over 400 whp on my mk6 R.
@COMotorsports Жыл бұрын
A similar setup to this.
@se1663 Жыл бұрын
Haven't watched it yet. But DPI WMI should yield ~104oct. I remember back in the day, Sean from APR posted about how they were doing stage 2+ vs. stage 3 testing on the Mk6 R platform. He said the stage 2+ had DPI WMI and said it was nearly as fast as the stage 3. Personally I don't have the balls or the desire to keep up the maintenance. I'd rather just run e85 with UM proflex or 104 with APR.
@COMotorsports Жыл бұрын
Lots of people, like us don't have E at the pump so it's not an option.
@Gnaus76 Жыл бұрын
Love those wheels, anyone know what they are called?
@asktheanswer2250 Жыл бұрын
18" VW Prismas - enjoy!
@thetank5181 11 ай бұрын
What he said. They are the stock VW Atlas wheels
@bamdragon25 3 ай бұрын
Without lsd or awd I wouldn't even try making mine have that much power. I don't see a point if I already spin tires at 330hp and can't even use launch
@rickm.10 Жыл бұрын
Stock internals?
@COMotorsports Жыл бұрын
Full breakdown is in other video I believe. I don't remember everything off the top of my head, but it's documented there.
@dustysteele5408 Жыл бұрын
Wanted to give $20, didn’t see the option.
@COMotorsports Жыл бұрын
Appreciate it.
@kennesimpson7105 Жыл бұрын
What size meth nozzles ?
@COMotorsports Жыл бұрын
It's all dependant on the setup, boost and power goals.
@kennesimpson7105 Жыл бұрын
Totally understood. But I’m asking what size did you guys use in this particular video on that particular setup ?
@COMotorsports Жыл бұрын
@@kennesimpson7105 it's unlikely you're running the exact same setup, on our trash fuel so sort of irrelevant. It's no different then how much timing I'm running in it. It's specific to the setup. What works on this setup may not work at all on your setup.
@kennesimpson7105 Жыл бұрын
I get that. I’m just curious.. we got 91 and e85 here.. so rn I’m tuned with e33 and using 750cc meth nozzle on stroker 660 setup only 20 psi for now. Haven’t had to pull any timing out of meastro base file timing yet. I’m just tryna compare to something somewhat similar
@COMotorsports Жыл бұрын
@@kennesimpson7105 e30 makes it not that comparable. You're seeing way more benefit from knock supression just with that preventative of E., It makes a huge difference.
@mycahjewell2272 Жыл бұрын
Just needs some real wheels and tires to put the power down.
@thetank5181 11 ай бұрын
Those wheels are from VW Atlas. I think they look pretty nice with low profile tires
@buddysshop1860 Жыл бұрын
People on the internet say meth is bad. Pffff...dummies
@Bomhilsnotcountries Жыл бұрын
What two size nozzles were used?! Did you make a custom nozzle.
@jonathonwilliams93 Жыл бұрын
Kinda glad dave isn't the kinda guy to push the car beyond its limit just for clickbait. Kudos you Sir 🫡
@COMotorsports Жыл бұрын
I did that with the 1.8hoopt lol actually that was never intentional, it just wanted to make jam.
@jonathonwilliams93 Жыл бұрын
@CO Motorsports the 18hoopt was just built different though 😎💪
@steveallam 3 ай бұрын
Where did the customer get WV spinner wheel center caps?
@COMotorsports 3 ай бұрын
Zero clue sorry, google will likely get you there.
@savagecr-x2438 Жыл бұрын
The term you were looking for is the 91 octane fuel is your handicap 😊
@COMotorsports Жыл бұрын
We didn't want gen X chasing us down.
@savagecr-x2438 Жыл бұрын
@@COMotorsports 😂😂😂
@fanelqqq4074 Жыл бұрын
Mix meth?
@COMotorsports Жыл бұрын
50/50
@TheRebuilt1 Жыл бұрын
Thanks!
@dustysteele5408 Жыл бұрын
How did you change it to $20?
@COMotorsports Жыл бұрын
Greatly appreciated. Honestly it's humbling. XOX
@TheRebuilt1 Жыл бұрын
@@dustysteele5408 there is a sliding scale to adjust the donation amount. I think its light blue by default at 2.00
@dustysteele5408 Жыл бұрын
@@TheRebuilt1 I didn’t see that, I’ll have to look for that next time. It gave options for $5, $10, & $50.
Poly Holy Yow Spanish
Рет қаралды 29 МЛН
CO Motorsports
Рет қаралды 16 М.
Lilsnoop213
Рет қаралды 54 МЛН