This is my second Keurig Coffee Brewer. kzfaq.infoUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first one lasted 6 years. It worked beautifully until the day it didn't. It was hard to go back to the drip coffee for a couple of days while I waited on my Keurig to get here. There is a huge difference in the taste. Keurig makes a really good cup of coffee. This new one is a little different from my old one. I find putting the water filter in was easier than on the old one. Attaching the water reservoir was also a little different but once I figured it out, it too was easier. This new one has the auto off feature but is not programmable like the old one. Only three cup sizes instead of four. The odd thing for me was how much lighter in weight this one is compared to my old one. More plastic and much less metal in the construction of this one. The price is so much less than the original Keurig that I bought and the coffee tastes the same so all in all I am satisfied.
@richarddiaz7602 Жыл бұрын
Thank you so much for helping find a solution for my primo water dispenser, like you it was brand new, instead off replacing it you assisted me through an easy fix Now it's back in motion and up and running just like new. You were very helpful.
@p.a.carpenter3400 Жыл бұрын
THANK YOU SO MUCH 💓 I followed your instructions and it started working! I'll be sure to be careful how I take the water bottles in and out of the dispenser.
@origjazz2 жыл бұрын
Thank you for this video! I followed your directions and it didn’t work…so I basically pushed the rod up and down(as if I were plunging it and it kicked on…I think there must have been air in the line Thank you again for putting me on the right path…I hope between our 2 methods we can help out a few folks… ✌🏽
@lorenzomathis72883 жыл бұрын
Thank you so much for creating this video! It literally helped me fix my water cooler...took less than 2 seconds to do what you showed and it worked like a charm!
@becca6446 Жыл бұрын
Thanks for making this video, I had same exact issue and almost pitched my Primo dispenser! Much appreciated!!
@yeceniabautista83122 жыл бұрын
This is exactly what was wrong with mine. I'm glad your video was the first one to come up. Thank you!
@gamechanger49732 жыл бұрын
Awesome! I've been online looking up the manual and anything I could find to make it work then I saw your video, I looked at both ends of the hose, first the end st the bottle was pretty kinked so I straighten that out and then started pushing in the pump side and it went in about an inch and wall la the pump kicked in and filled the tank. Thank you for posting this video.
@nehj61022 жыл бұрын
I have the same water dispenser. The coffee maker doesn't work on mine, but the cold and hot water works.. I'm ready to buy another 1 but upon seeing your video, maybe I should check my cannister too. Thanks for the video!
@katherynemero41182 жыл бұрын
I just watched your video. I did exactly what you said- Boom. It's working again. Thank you.
@theskinnyonus88372 жыл бұрын
I just bought one used in this is exactly what happened and it worked immediately after me staring at it for almost 24 hours like why is this light still blinking and there's no hot water thank you so much for your video
@charlesj77483 жыл бұрын
Thanks we had the same problem. Perfect fix. Thanks for the video.
@meganaxtell86272 жыл бұрын
That was it! Thank you!! Now I need to take off the top and see if my resevoir needs cleaning
@yvonnebashir73832 жыл бұрын
Awesome! When I took a closer look I noticed that the hose was loose from the pump! Just think I almost junked it!!!
@larkeys72462 жыл бұрын
Thank you. I was about to pitch my cooler. It is working fine now
@baldosoto4336 Жыл бұрын
Thank you very much. I was about to buy a new one but saw this video and fixed it.
@jackiezumazuma15462 жыл бұрын
Thanks had the same issue, very simple fix.
@heidiwells9358 Жыл бұрын
You just saved me a bunch of $$$! Thank you!!!!
@PuertoricanQueen872 жыл бұрын
Thank you so much you just saved Me so much money thank you 😊🙏😘
@jaybennington3 ай бұрын
Oh my god. Thank you bro. I was about to office space this damn thing.
@NuevacuponeraEnUSA Жыл бұрын
Muchas gracias acabo de reparar el mío estaba justo igual 😊 bendiciones
@josephdeeb222 жыл бұрын
Thank you.. This worked for me
@tanphu16063 жыл бұрын
Many thanks to you 🙏☺🙌
@oswaldogarcia90963 жыл бұрын
Thank you my hose was loose but in the bottle side.
@dmitch78842 жыл бұрын
I had the same problem and the fix in this video didn't work for me. So try this, put the tube down in the bottle with the door open. Press the door switch, witch will start the pump to running then make a up and down pumping motion with the water tube in and out of the water bottle and that will help the pump to start the siphon process. Good luck 👍🏽 it works for me.
@icbratbrattz79093 жыл бұрын
I was tryin to figure out mine too... plus u have to make sure the part u put on the bottle is pushed all way down
@cristianlopez3363 Жыл бұрын
Yesssirrr. My parents think I’m a genius 🤣
@BigbrookLORDOFTHE7SEAS2 жыл бұрын
Thank you im going to check this now when i go home hopefully it works for me too
@JesusRamirez-er9uj3 жыл бұрын
Thank you working 👍
@perezgirl2 жыл бұрын
Thank you!!
@tamapaepae017 ай бұрын
My Primo k cup cooler is a 2023 model, if it’s not dispensing water, it’s because the stainless reservoir is FROZEN SOLID.. unplug it from the wall and let thaw 3-4 hours… no need to take apart like I did… the tubes in the block of ice are stuck and I forced it off, breaking things- had to buy a replacement of $100… unplug and let thaw 3-4 hours…
@robira13132 жыл бұрын
I did not have any luck with that solution. I disconnected and re-connected all of the hoses (even unscrewed the back grill to access the hoses back there) and still - the red light flashes with a full water bottle. Pump is running but not sucking the water into the cannister.
@dmitch78842 жыл бұрын
Rob I had the problem and the fix in this video didn't work for me either. So try this, put the tube down in the bottle with the door open. Press the door switch, witch will start the pump to running then make a up and down pumping motion with the water tube in and out of the water bottle and that help the pump to start the siphon process. Good luck 👍🏽 it works for me.
@robira13132 жыл бұрын
@@dmitch7884 - I ended up purchasing another unit and also a 5-year warranty ($25). So now I have a peace of mind!
@zoilycalderon37363 жыл бұрын
Can you post a video of when you opened the top so we can see pls?
@mikerotch45972 жыл бұрын
And the big corporations failed getting more of our money 😁
@Alikhan78611 Жыл бұрын
My cooler is having a weird issue. It won't feed the water unless I take the pipe out of the water bottle and once pump starts, I still it back in and it works fine until it needs to fill the internal tank again then I have to repeat the process... any ideas?
@PolarBearXx4 ай бұрын
Mine froze model is 601144 no water was coming out n the pump wasnt working i unplugged it for the whole day n i just plugged it in its works it had froze bought mine in 20 i need to see how to take the top off n pop the resevour
@zachmaas76182 жыл бұрын
Where is the thermostat on this model
@jissettec90843 жыл бұрын
Thank you for this video, mine is not cooling and the red light stays on.
@leslieramirez-mercado48642 жыл бұрын
My hot water is running but not my cold water. Can someone help
@veronicaperez98642 жыл бұрын
I have the same problem
@jesv4026 Жыл бұрын
I had the same issue. In my case the reservoir where the water is held had frost. I opened the unit and sure enough I noticed there was ice build up which was causing the water not to Flow. The solution was turn off the power in t he back if the unit only for the cold water and let the ice melt for a couple of hours. Before you turn the switch back on, check to see that the water dispenses. If the water comes out turn the power back on so it can dispense cold water. If it happens again just turn off power and let I've melt and repeat the process. I hope that helps.
@jesv4026 Жыл бұрын
@@veronicaperez9864 I had the same issue. In my case the reservoir where the water is held had frost. I opened the unit and sure enough I noticed there was ice build up which was causing the water not to Flow. The solution was turn off the power in t he back if the unit only for the cold water and let the ice melt for a couple of hours. Before you turn the switch back on, check to see that the water dispenses. If the water comes out turn the power back on so it can dispense cold water. If it happens again just turn off power and let I've melt and repeat the process. I hope that helps.
@QuinlanVoss. Жыл бұрын
Has anyone located a thermostat on this thing? I opened the top had a bunch a frost. Currently trying to find a thermostat to lower the temp.
@SheLuvBril Жыл бұрын
Frrr doing it rn ong
@josereyes34722 жыл бұрын
Quick question...mine dispenses from the hot side but not the cold side...
@jesv4026 Жыл бұрын
I had the same issue. In my case the reservoir where the water is held had frost. I opened the unit and sure enough I noticed there was ice build up which was causing the water not to Flow. The solution was turn off the power in t he back if the unit only for the cold water and let the ice melt for a couple of hours. Before you turn the switch back on, check to see that the water dispenses. If the water comes out turn the power back on so it can dispense cold water. If it happens again just turn off power and let I've melt and repeat the process. I hope that helps.
@4244john8 ай бұрын
You didn’t show us jack.
@joannchartier4547 Жыл бұрын
Mine keeps freezing u know how to fix that
@patyamezquita490 Жыл бұрын
Ja... it worked
@IvanMRodriguez2 жыл бұрын
primo water dispenser parts replacement #900172 insert probe (tube) ???
@yuval260990 Жыл бұрын
I owe you $150
@jalisawilliams70063 жыл бұрын
This didn’t help because we didn’t see what you were talking about
@clar3312 жыл бұрын
Did something else work for you?
@denamy87 Жыл бұрын
Alguien sabe porque el mio dejo de darme agua fria solo me sa agua pero no la enfria 😢😢😢😢😢