Weber 32/36 Carb install on 1977 Toyota Chinook Instructions

Рет қаралды 5,376

Ray Wallace

3 жыл бұрын

Пікірлер: 79

@carlbrown2779 29 күн бұрын

I'm getting ready to do this today on my 77 Chinook as soon as my Weber shows up, this came in clutch!

@rwallaceiv 29 күн бұрын

Hope it helps

@jonathanh871 Жыл бұрын

this video came in clutch, I forgot where the brake booster vacuum went to in the intake manifold and you had just the right angle for me to see where it went. Thanks big dawg

@keralisforthewin736 Жыл бұрын

I’ve got a 77’ and got a 32/36 in tonight and had a HORRID stock carb on it. This video was perfect and made the swap make much more sense with the little details. Good video!

@rwallaceiv Жыл бұрын

Cheers mate!

@azorianification 3 жыл бұрын

Love the chinook, I have a 77. I put the exact Weber on my 20r and it was a huge improvement. Just swapped in a 22r and swapped the Weber over. Not running as great as it did on the 20r. Still trying to figure out the issues.

@Matt-rl5mx Жыл бұрын

Awesome video, planning to do the same set up on my 78'. Did you use both block plates and all of the block plugs from LCE?

@rwallaceiv Жыл бұрын

yes, block off plates from LCE, be sure to order the plugs too, those screw in water fitting plugs.

@Matt-rl5mx Жыл бұрын

@@rwallaceiv Cool, thanks! Did you install a new fuel pump since the weber needs 2-3 psi?

@rwallaceiv Жыл бұрын

@@Matt-rl5mx nope. Runs just fine with stock pump. No over pressure problems

@lindaleehulsey3167 Жыл бұрын

👋 Ray....Lindalee

@bobettinson7024 Жыл бұрын

What did you do with the hoses from the smog pump underneath? Did you block the holes some how?

@rwallaceiv Жыл бұрын

unbolted the smog pump, and trashed smog items, block off plates from LCE engineering for smog delete

@stealthjo 2 жыл бұрын

Did you ever hook the evap canister solenoid up? Im not sure what to do with it.

@rwallaceiv 2 жыл бұрын

Yeah I think I left that, I didn't know what it did.

@Ty-yz2kd 3 жыл бұрын

great video. what tires do you have on?

@rwallaceiv 3 жыл бұрын

BUCKSHOT MUDDERS 27 INCH

@Ty-yz2kd 3 жыл бұрын

@@rwallaceiv they fit the stock rims and fender clearance is all good?

@rwallaceiv 3 жыл бұрын

@@Ty-yz2kd stock rims yes, and does not rub, full clearance

@safeeffective385 Жыл бұрын

@@rwallaceiv We have a 75' that's great but has an issue with the front tires rubbing against inside of wheel wells when cornering on uneven pavement. Any idea what could be causing that?

@lindaleehulsey3167 Жыл бұрын

👋 Ray.....Lindalee here....... Question: about my Chinook again.... When you put the thermostat gasket in do U put thermostat with little pop up air hole towards windshield n & then gasket or do U put gasket then put thermostat ontop of gasket? 👌 ran my battery down, can not time it myself anyway, but, still have to flush gunk I think after putting new gasket on water pump. Have a place that will time it & adjust carb, but; they will have to charge battery. Only $100 they said, then; tell me if it needs anything else. Question: I saw this stuff COIL CLEANER a guy used for air conditioner coils & thought buying the stuff spraying on radiator in Chinook. To clean it. Although I have with hose looks OK outside, might be loaded gunk inside. Please tell me what U think. Respected, 💋😘Lindalee

@4-WHEEL-DRIVE 3 жыл бұрын

nice honcho jeep j10

@safeeffective385 Жыл бұрын

We have a 75' that's great but has an issue with the front tires rubbing against inside of wheel wells when cornering on uneven pavement. Any idea what could be causing that?

@rwallaceiv Жыл бұрын

Do you have over sized tires? that could cause it, or your front shocks are so tired and weak that they sag, perhaps check alignment, and if you have 2wd then the front can be adjusted with height by adjusting the torsion bars.

@safeeffective385 Жыл бұрын

@@rwallaceiv Thanks much buddy! I had not considered the torsion bars, so will give that a shot. The shocks look okay, and aren't leaking but wheels are slightly wider than stock. Will mess w the torsion bars first and see what that does... and will let you know. Thanks much!

@kingcruz3 2 жыл бұрын

what is the red stuff you put on the gasket?

@rwallaceiv 2 жыл бұрын

It is a permatex gasket sealer. amzn.to/38UhjA9

@chuckmac6541 2 жыл бұрын

Do you still have the carburetor and how much would it be

@rwallaceiv 2 жыл бұрын

I sold that one. But I have another. But it might need a cleaning

@Red_Alpha_Fox3358 3 жыл бұрын

I happen to have a 77 as well but right now I am having a rough time with her idling and she's also not doing too hot as well

@rwallaceiv 3 жыл бұрын

ill sell ya my rebuilt oem carb, runs great

@Red_Alpha_Fox3358 3 жыл бұрын

@@rwallaceiv is it a manual choke if it is then I'll need the choke Linkage as well because I don't think mine has it

@Red_Alpha_Fox3358 3 жыл бұрын

And if so how much

@rwallaceiv 3 жыл бұрын

@@Red_Alpha_Fox3358 Its auto choke, uses the water hose line, stock

@rwallaceiv 3 жыл бұрын

@@Red_Alpha_Fox3358 75 bucks

@danielzhao3083 3 жыл бұрын

Can you send me a link where to buy the carburetor?

@aerialrescuesolutions3277 2 жыл бұрын

LCE Performance, Lake Havasu

@jacobbabb2540 3 жыл бұрын

What size are those tires?

@rwallaceiv 3 жыл бұрын

27 inch tires

@lindaleehulsey3167 Жыл бұрын

👋 My CHINOOK is 1977. It ran good. But, I waited t replace water pump slow leak. I bought a gasket had to be BRAVE. Cleaned out reservoir, flushed radiator all clean running out of engine.. Is there. A air pump to keep the engine cool? Or is it the fan & radiator? I put reservoir green ANTIFREEZE, as both O'Reilly & Autozone said too. It runs now new water pump gasket used old pump, cleaned it, spinning good. It warmed up, burped Then it chugga lugged after I stepped on gas pedal. HELP! OPINION? 💋😘 70 YR. YOUNG New at this 😊😃

@rwallaceiv Жыл бұрын

Chug a lug after stepping on gas pedal could be fuel delivery, or clogged carb, have you addressed those issues before continuing? And perhaps a timing,? I made a video on how to time the engine. Go check it out

@lindaleehulsey3167 Жыл бұрын

@@rwallaceiv thank 😊 U so fast..... Gonna see....... 💋😘

@chuckmac6541 2 жыл бұрын

Do you still have the original carburetor

@rwallaceiv 2 жыл бұрын

No sold

@rwallaceiv 2 жыл бұрын

But I have another one waiting to be rebuilt if ya want that one.

@lindaleehulsey3167 Жыл бұрын

👋 saw timing 📹 I looked found the line between the pully & fan belt. It is way off to the left. My engine is warm, no choke on, want to loosen distributor to turn. Want to listen to engine, how it sounds then tighten once line moves over. Any advice? 💋😘

@rwallaceiv Жыл бұрын

Yes follow my video, I can't remember what degree, match that degree and then retighten the distributor

@lindaleehulsey3167 Жыл бұрын

@@rwallaceiv 75 degree reading on your device. But do not have one. That line is far to left. I want to let engine warm, loosen bolt on distributor then turn slightly to right see, listen to engine. Check line if it moves to right like your video. 👌 YES, go for it.? PS does distributor adjust timing BELT. Stupid question 😒🙄 have no idea what I am doing. Just no money. ❤💙💜 my truck so dependable. 💋😘

@lindaleehulsey3167 Жыл бұрын

@@rwallaceiv 👋 🌄 can I pull distributor out to put points in B4 turning for timing.

@rwallaceiv Жыл бұрын

@@lindaleehulsey3167 I wouldn't take it out. Because there are certain steps to get it back aligned. You should get a weber carb. It will probably fix all your problems

@lindaleehulsey3167 Жыл бұрын

@@rwallaceiv thank U 😊 do U have a good sales reference. Know they are pricey always wanted one. 💋😘