ZZP 3800 Coilover Breakdown

Рет қаралды 6,017

3 жыл бұрын

Tyler breaks down the details of our all-new W-Body coilovers.
ZZP is located in Wyoming, MI. We are the world’s largest supplier of aftermarket performance parts for 3800, Sonic/Cruze, Ecotec, and ATS platforms, providing industry-leading customer service and support.
Our staff of professionals has experienced knowledge in all the vehicle platforms we represent. ZZPerformance is dedicated to 100% customer satisfaction. We provide you with highly specific technical information, that can’t be found anywhere else.
Interested in modding your car? Check out our parts at zzperformance.com
Questions about modding? Email us at customerservice@zzperformance.com

Пікірлер: 39

@ecastoe 3 жыл бұрын

Always loved the 3800/wbody, thank you for continuing to support the platform.

@bensond32 3 жыл бұрын

I can't wait to try these out! Also, thank you for continuing to support the w-body platform.

@obetztyranthunter 3 жыл бұрын

Thank once again zzperformance for your unrivaled support for the w-body platform. Still a very relavent car today!

@dxdean3ux 3 жыл бұрын

Can't wait to see them come out for the cobalts and sonics!

@deebalt071 3 жыл бұрын

Same

@ericlewis5035 3 жыл бұрын

Hi Tyler. Those look amazing 😮 I definitely need some this year 😍

@boosted2.4_sky 3 жыл бұрын

LET'S GO TYLER!!!!🏁

@Mr.LT1 3 жыл бұрын

Cant wait for these to be back in stock!!!!

@gbrunner24 3 жыл бұрын

We're looking at late May/early June tentatively for re-stock 🙌

@NewfieOn2Wheels 3 жыл бұрын

Took the plunge and ordered a set for my regal, can't wait to get them put in. I'm curious to see how they'll compare to BC coilovers

@PhillyDee215 3 жыл бұрын

Very nice 👌

@bluejwalker Жыл бұрын

How close to stock is the suspension feel when the dampening is turned all the way down? I like the stock softness for highway driving and I'm curious how much of a difference these are at the softest setting

@nsa6865 2 жыл бұрын

definite buy

@jackhousevibesjhv5506 2 жыл бұрын

How would these perform in well below zero cold temperatures? My factory shocks on my camaro are rough in winter. My car is my daily. Wondering if I raised these if it would absorb more.

@ZZPerformanceChannel 2 жыл бұрын

All shocks are going to suffer in the winter due to the fact that they're filled with fluid (oil) and that fluid gets cold. Since you can adjust the damping on a coilover you can, in theory, turn down the damping in the winter to make the shock "softer" and then turn the damping back up in the summer.

@joeygarza4879 3 жыл бұрын

When they gonna restock

@Doing150s 3 жыл бұрын

Would these help with like 550 pounds of audio in the back of my na grand prix

@kipperzz5380 3 жыл бұрын

Man I'd love a zzp flag to put up in my garage!

@mthompson8405 3 жыл бұрын

Need these for H body

@joebrown967 3 жыл бұрын

How do I buy two upper camber plates from you guys

@dezldave961 3 жыл бұрын

Curious if these will be adjustable enough to make the rear near-solid for drag use? Would be nice to have the great ride and just make track adjustments for straight-line and/or turning as needed. (Edit: basically, how uncomfortably harsh can I make the rears for limited drag racing use?)

@gbrunner24 3 жыл бұрын

With the rears at full max “hard” on the damping knob they’re pretty dang stiff. On our drag Sonic we run the rears full stiff and the fronts around the middle and it helps control the rear squat quite a bit. I definitely wouldn’t drive around the street on the full hard setting, if that helps haha

@dezldave961 3 жыл бұрын

@@gbrunner24 sounds good. If it potentially eliminates the need for the "cable mod" and can be changed to drive home in style, I'm liking it.

@dezldave961 3 жыл бұрын

Ordered! (Edit: arrived! Going in this week!) Excited to get them right as I'm about to get the Stattama turbo setup on the road. (Needed fresh tires and alignment anyway)

@joebrown967 3 жыл бұрын

Can I buy two front upper camber plates

@david060383 3 жыл бұрын

Are there any measuring marks to help you set the ride heights on each strut, or do you have to just eyeball the leveling?

@ZZPerformanceChannel 3 жыл бұрын

No measuring marks, but if you are adjusting on the car you can measure the free threads between the bottom lock collar and the top to make sure they are the same from side to side.

@david060383 3 жыл бұрын

@@ZZPerformanceChannel ah. Makes sense now.